User contributions for Blu

19:2119:21, 1 April 2024 diff hist +18‎ m CNC Mill ‎ →‎Trace Isolation current

07:3307:33, 28 March 2024 diff hist +60‎ m CNC Mill ‎ →‎0.6mm Slot Milling
07:3107:31, 28 March 2024 diff hist +482‎ m CNC Mill ‎ →‎FlatCAM Parameters
07:1607:16, 28 March 2024 diff hist +208‎ m CNC Mill ‎ →‎Workpiece Examples
04:2904:29, 28 March 2024 diff hist +87‎ N File:Example CNC Milling ch552 usbc RS.jpg ‎ MAG Laboratory Milled and Assembled CH552 test board with USB-C connector current
04:2304:23, 28 March 2024 diff hist +170‎ m CNC Mill ‎ →‎Trace Isolation: Clarified purpose of figure

19:2219:22, 17 March 2024 diff hist +803‎ m Creality CR10S ‎ added printer start script current

04:3304:33, 27 February 2024 diff hist +67‎ m IT Notes ‎ →‎The Internet of Trash and Single-Board Computers current

19:0619:06, 18 February 2024 diff hist +1,185‎ m K40 Laser Cutter ‎ →‎Feeds & Speeds current

18:3118:31, 17 February 2024 diff hist +500‎ m K40 Laser Cutter ‎ →‎Feeds & Speeds
12:1212:12, 17 February 2024 diff hist +722‎ m CNC Mill ‎ →‎Edge Milling
12:0012:00, 17 February 2024 diff hist +397‎ m CNC Mill ‎ →‎Trace Isolation
11:5911:59, 17 February 2024 diff hist +116‎ N File:Flatcam islands.png ‎ A screenshot showing undesired islands that form when the isolation settings are not entered correctly current

10:1510:15, 27 January 2024 diff hist +341‎ m K40 Laser Cutter ‎ →‎Brandon's 1/8" (3.2mm) Acrylic: added alignment notes

22:1622:16, 26 January 2024 diff hist +798‎ K40 Laser Cutter ‎ added settings
21:5921:59, 26 January 2024 diff hist +16‎ m K40 Laser Cutter ‎ →‎General Advice and Precautions: Clarified water cooling guideline

21:0021:00, 25 January 2024 diff hist +1‎ m K40 Laser Cutter ‎ →‎Air Assist Upgrades
20:5920:59, 25 January 2024 diff hist +35‎ m K40 Laser Cutter ‎ →‎Air Assist Upgrades: added link to the drag chain stl
20:5820:58, 25 January 2024 diff hist +278‎ m K40 Laser Cutter ‎ →‎Laser Guidance
20:4620:46, 25 January 2024 diff hist +8‎ m K40 Laser Cutter ‎ →‎Laser Guidance: added approximate date for laser guidance install
20:4520:45, 25 January 2024 diff hist −32‎ m K40 Laser Cutter ‎ →‎Future Upgrades: removing laser guidance because it is now a current upgrade
20:4520:45, 25 January 2024 diff hist +200‎ m K40 Laser Cutter ‎ →‎History

03:3603:36, 1 January 2024 diff hist +3,842‎ CNC Mill ‎ →‎Supplemental Resources
03:2103:21, 1 January 2024 diff hist +119‎ N File:Flatcam screenshot.png ‎No edit summary current

23:1723:17, 31 December 2023 diff hist +56‎ m CNC Mill ‎ →‎Supplemental Resources

16:2616:26, 28 December 2023 diff hist −9‎ m Pulse XE ‎ →‎Start G-Code current

20:1720:17, 8 December 2023 diff hist +303‎ m HAL ‎No edit summary current

11:2311:23, 4 December 2023 diff hist +32‎ m IT Notes ‎ →‎The Routers
11:2211:22, 4 December 2023 diff hist +21‎ m IT Notes ‎ →‎The Internet of Trash and Single-Board Computers

03:5503:55, 15 November 2023 diff hist −111‎ m Category:Equipment ‎ equipment update

02:0602:06, 11 November 2023 diff hist +4‎ m K40 Laser Cutter ‎ →‎Air Assist Upgrades: Clarified PLA vs aluminum air assist nozzle

00:5400:54, 25 October 2023 diff hist 0‎ m User:Blu ‎ →‎Current Role in MAG Lab current

06:5406:54, 5 October 2023 diff hist +254‎ m HAL ‎ →‎HAL Enclosure
06:5306:53, 5 October 2023 diff hist +299‎ m HAL ‎ Added maintenance notes about the board inside HAL

08:5408:54, 1 October 2023 diff hist +231‎ m CNC Mill ‎ added model number and added some fusion360 postprocessing notes

12:5312:53, 19 September 2023 diff hist +689‎ m Pulse XE ‎ →‎Operators' Log

11:3011:30, 12 August 2023 diff hist −2‎ m IT Notes ‎ →‎The Internet of Trash and Single-Board Computers
11:2911:29, 12 August 2023 diff hist +269‎ m IT Notes ‎ →‎The Internet of Trash and Single-Board Computers: Added more cameras

18:5718:57, 28 July 2023 diff hist −38‎ m K40 Laser Cutter ‎ →‎Materials
18:5718:57, 28 July 2023 diff hist +626‎ m K40 Laser Cutter ‎ →‎Materials
18:4618:46, 28 July 2023 diff hist +193‎ m K40 Laser Cutter ‎ →‎Software Support: filled out section
18:4118:41, 28 July 2023 diff hist +167‎ m K40 Laser Cutter ‎ →‎General Advice and Precautions
18:3118:31, 28 July 2023 diff hist +483‎ m K40 Laser Cutter ‎ →‎Getting Started: filled in section
17:5417:54, 28 July 2023 diff hist +8‎ m K40 Laser Cutter ‎ added cutting size.

10:0810:08, 30 May 2023 diff hist −50‎ MAGLab:About ‎No edit summary current

03:4903:49, 13 May 2023 diff hist +34‎ m IT Notes ‎ →‎The Internet of Trash and Single-Board Computers

10:0210:02, 12 May 2023 diff hist +288‎ m Pulse XE ‎ →‎Operators' Log
09:5009:50, 12 May 2023 diff hist +842‎ m Pulse XE ‎ →‎Operators' Log: Added changed settings
09:4009:40, 12 May 2023 diff hist −51‎ m Category:3D Printing ‎ →‎3D Printers current
09:3209:32, 12 May 2023 diff hist 0‎ m Zortrax M200 3D Printer ‎No edit summary current
09:3209:32, 12 May 2023 diff hist 0‎ m QiDi X-Plus 3D Printer ‎No edit summary current
09:3109:31, 12 May 2023 diff hist 0‎ m Pulse XE ‎No edit summary
09:3109:31, 12 May 2023 diff hist 0‎ m Monoprice Maker Select 3D Printer V2 ‎No edit summary current
09:3109:31, 12 May 2023 diff hist 0‎ m Creality CR10S ‎No edit summary
09:3009:30, 12 May 2023 diff hist +23‎ m Category:3D Printing ‎No edit summary
09:2809:28, 12 May 2023 diff hist +150‎ m Category:3D Printing ‎ →‎Equipment
09:2609:26, 12 May 2023 diff hist +319‎ m Category:3D Printing ‎ →‎Procedures
09:2509:25, 12 May 2023 diff hist +390‎ m Category:3D Printing ‎ →‎History

22:5722:57, 4 May 2023 diff hist −13‎ m K40 Laser Cutter ‎ →‎Future Upgrades: Air assist already implemented.

18:3018:30, 4 April 2023 diff hist +35‎ N 3D Printing ‎ Blu moved page 3D Printing to Category:3D Printing current Tag: New redirect
18:3018:30, 4 April 2023 diff hist 0‎ m Category:3D Printing ‎ Blu moved page 3D Printing to Category:3D Printing
07:4907:49, 4 April 2023 diff hist +36‎ m Creality CR10S ‎ →‎2023-04-01 Brandon
07:4307:43, 4 April 2023 diff hist +1,024‎ m Creality CR10S ‎ →‎Operators' Log: Added operator log and some settings

19:1119:11, 1 April 2023 diff hist 0‎ m User:Blu ‎ →‎Character Description

21:5521:55, 27 March 2023 diff hist 0‎ m User:Blu ‎ hip size for males is measured differently

21:4421:44, 19 March 2023 diff hist −1‎ m IT Notes ‎ →‎Wireguard: Brandon got rid of the desktop and swapped to another laptop

09:2509:25, 13 March 2023 diff hist +431‎ m Creality CR10S ‎ →‎Operators' Log
08:3608:36, 13 March 2023 diff hist +665‎ m Pulse XE ‎ →‎BLu 2022-12-25
07:5407:54, 13 March 2023 diff hist +229‎ m Category:3D Printing ‎ →‎Procedures
07:5107:51, 13 March 2023 diff hist +1,701‎ m Monoprice Maker Select 3D Printer V2 ‎ →‎Operators' Log

19:2619:26, 25 January 2023 diff hist +414‎ m Category:3D Printing ‎ →‎Filament Dehydration

01:4601:46, 19 January 2023 diff hist +424‎ m Zortrax M200 3D Printer ‎ →‎Operators' Log

11:2211:22, 18 January 2023 diff hist +133‎ N File:Zortrax CalibrationBOA.jpg ‎ https://www.thingiverse.com/thing:287033 Printed by the Zortrax in ABS. Left cube is at 250C, right cube is at 240C. current
10:1110:11, 18 January 2023 diff hist +470‎ m Zortrax M200 3D Printer ‎ →‎Operators' Log
10:0810:08, 18 January 2023 diff hist +686‎ m Monoprice Maker Select 3D Printer V2 ‎ →‎Operators' Log
09:5209:52, 18 January 2023 diff hist +188‎ m Creality CR10S ‎ →‎Operators' Log

01:2601:26, 15 January 2023 diff hist +69‎ m IT Notes ‎ →‎The Routers

11:0311:03, 13 January 2023 diff hist +2‎ m Bicycle Stuff ‎No edit summary current
11:0311:03, 13 January 2023 diff hist +22‎ m Bicycle Stuff ‎No edit summary
11:0211:02, 13 January 2023 diff hist +2,132‎ N Bicycle Stuff ‎ Added new page with bicycle stuff found in the bicycle box

20:1420:14, 6 January 2023 diff hist +75‎ m Creality CR10S ‎ →‎Operators' Log
07:2207:22, 6 January 2023 diff hist +59‎ m Monoprice Maker Select 3D Printer V2 ‎ →‎Introductory Information
06:5406:54, 6 January 2023 diff hist +104‎ Monoprice Maker Select 3D Printer V2 ‎ →‎Start G-Code
06:5206:52, 6 January 2023 diff hist +132‎ m Monoprice Maker Select 3D Printer V2 ‎ →‎Brandon 2023-01-05
03:5703:57, 6 January 2023 diff hist +160‎ m Monoprice Maker Select 3D Printer V2 ‎ →‎Printer Settings
03:5603:56, 6 January 2023 diff hist +348‎ m Monoprice Maker Select 3D Printer V2 ‎ →‎Printer Settings
03:4603:46, 6 January 2023 diff hist +1,138‎ Pulse XE ‎ Added startup gcode
03:3803:38, 6 January 2023 diff hist −12‎ m Pulse XE ‎ →‎History and Operator Notes
03:3703:37, 6 January 2023 diff hist +5‎ m Monoprice Maker Select 3D Printer V2 ‎ →‎Behind the Name: Clarified that the monoprice logo actually spells "MP"
03:3303:33, 6 January 2023 diff hist +1,217‎ Monoprice Maker Select 3D Printer V2 ‎ Added printer settings, specifically the gcode.
03:1803:18, 6 January 2023 diff hist +122‎ m Monoprice Maker Select 3D Printer V2 ‎ →‎Operators' Log
03:1403:14, 6 January 2023 diff hist +392‎ Monoprice Maker Select 3D Printer V2 ‎ →‎Components

10:2610:26, 31 December 2022 diff hist +45‎ m Template:3D DigitalFabrication ‎ Added Pulse XE 3D Printer current
10:2410:24, 31 December 2022 diff hist +194‎ m Pulse XE ‎No edit summary
10:1810:18, 31 December 2022 diff hist +70‎ N File:Pulse XE.jpg ‎ Pulse XE printer in its enclosure. Taken on 2022-12-31. current
10:1710:17, 31 December 2022 diff hist −49‎ m Pulse XE ‎No edit summary
10:1610:16, 31 December 2022 diff hist +441‎ m Zortrax M200 3D Printer ‎ →‎Brandon 2022-12-31
10:1010:10, 31 December 2022 diff hist +92‎ N File:M200 2022-12-31.jpg ‎ chatlowpoly printed on the Zortrax M200 on 2022-12-31 as a qualification print current
10:0910:09, 31 December 2022 diff hist +258‎ Zortrax M200 3D Printer ‎ Added operator notes from printer re-operational status on 2022-12-31.

07:2607:26, 30 December 2022 diff hist −6‎ m Pulse XE ‎No edit summary
07:2507:25, 30 December 2022 diff hist +211‎ m Pulse XE ‎ →‎History and Operator Notes
07:2107:21, 30 December 2022 diff hist +116‎ m Category:3D Printing ‎ →‎Filament Dehydration

02:5402:54, 29 December 2022 diff hist +57‎ m IT Notes ‎ →‎The Internet of Trash and Single-Board Computers

21:4621:46, 22 December 2022 diff hist +51‎ m User:Blu ‎ →‎Character Description
21:2921:29, 22 December 2022 diff hist +986‎ m User:Blu ‎No edit summary

15:5115:51, 18 December 2022 diff hist +1,487‎ Monoprice Maker Select 3D Printer V2 ‎ Added first operators' log.
15:3915:39, 18 December 2022 diff hist +125‎ m Creality CR10S ‎No edit summary

00:1600:16, 16 December 2022 diff hist +45‎ m Creality CR10S ‎ →‎2022-12-14 Brandon

07:3207:32, 15 December 2022 diff hist −46‎ m Creality CR10S ‎ →‎2022-12-14 Brandon
04:5604:56, 15 December 2022 diff hist +646‎ m Creality CR10S ‎ →‎Operator's Log: Added fan replacement notes

09:0009:00, 14 December 2022 diff hist +545‎ m Zortrax M200 3D Printer ‎ →‎Fume Filtering
08:5408:54, 14 December 2022 diff hist +373‎ m Zortrax M200 3D Printer ‎ →‎Filament Usage: added PLA information
08:5108:51, 14 December 2022 diff hist +3,214‎ Zortrax M200 3D Printer ‎ reorganized page again, added filament information, added another operator note with the problems encountered during fan replacement
08:1408:14, 14 December 2022 diff hist +52‎ N File:M200 Fan2 Fan3.jpg ‎No edit summary current

02:5102:51, 13 December 2022 diff hist +2,106‎ Zortrax M200 3D Printer ‎ Added operator's log. Re-jiggered page organization. Added additional information about only Fans. Added information about thermal issues. Placed printer into maintenance.

03:1303:13, 12 December 2022 diff hist +67‎ m IT Notes ‎ →‎The Internet of Trash and Single-Board Computers: added pulseXE

23:0423:04, 9 December 2022 diff hist +126‎ m Creality CR10S ‎ →‎Firmware
23:0223:02, 9 December 2022 diff hist +1,224‎ Creality CR10S ‎ Added firmware, added controller board information.

03:0303:03, 7 December 2022 diff hist +431‎ m Creality CR10S ‎ →‎Operator's Log

23:1723:17, 4 December 2022 diff hist +887‎ m IT Notes ‎ →‎MAG Laboratory IT Services: Added minecraft information

20:3720:37, 2 December 2022 diff hist +389‎ m Creality CR10S ‎ →‎Operator's Log

23:3423:34, 1 December 2022 diff hist +40‎ m IT Notes ‎ →‎Wireguard: added brandon desktop

05:1805:18, 28 November 2022 diff hist +198‎ m Getting to MagLab ‎ →‎By Train current
05:1505:15, 28 November 2022 diff hist +839‎ m Getting to MagLab ‎ revised wording. added additional context to bicycling, walking, transit.

03:5003:50, 15 October 2022 diff hist +12‎ m IT Notes ‎ →‎Wireguard

06:4106:41, 10 October 2022 diff hist +16‎ m IT Notes ‎ →‎Wireguard

10:2910:29, 23 September 2022 diff hist +6,588‎ N Pulse XE ‎ New page about the Pulse XE 3D Printer.
09:2909:29, 23 September 2022 diff hist +79‎ N File:PulseXE First ChatLowPoly.jpg ‎ The first cat out of the Pulse XE. Layer adhesion issues galore. current
09:1009:10, 23 September 2022 diff hist 0‎ m Category:3D Printing ‎ →‎Equipment: Changed the M200 link to the first reference of the printer.
09:0909:09, 23 September 2022 diff hist +216‎ m Category:3D Printing ‎ →‎Equipment: Added the Pulse XE

12:5212:52, 19 September 2022 diff hist +23‎ m IT Notes ‎ added more information in the blurb at the beginning of the page. maybe this will let the search find this page easier?
12:4312:43, 19 September 2022 diff hist +4‎ m IT Notes ‎ →‎The Routers: correcting the name of the opnsense00 vm

09:5209:52, 13 September 2022 diff hist −2‎ m IT Notes ‎ →‎Outside Cameras
09:5109:51, 13 September 2022 diff hist +48‎ m IT Notes ‎ →‎Wireguard

04:3304:33, 4 September 2022 diff hist 0‎ File:Creality CR10.jpg ‎ Blu uploaded a new version of File:Creality CR10.jpg current
04:2504:25, 4 September 2022 diff hist +25‎ m Category:3D Printing ‎ added to activities category
04:2404:24, 4 September 2022 diff hist +34‎ N Activities ‎ Blu moved page Activities to Category:Activities: activities are a main mag laboratory wiki category now current Tag: New redirect
04:2404:24, 4 September 2022 diff hist 0‎ m Category:Activities ‎ Blu moved page Activities to Category:Activities: activities are a main mag laboratory wiki category now current
04:2304:23, 4 September 2022 diff hist +15‎ m Category:Activities ‎ added photography photo
04:2204:22, 4 September 2022 diff hist +89‎ N File:Brandon pinhole photograph.jpg ‎ Brandon's pinhole camera photograph of a weir and bridge in Snow Creek Park current
04:0304:03, 4 September 2022 diff hist +328‎ Epoxy Granite CNC Tabletop Mill ‎ closing remarks on the project current
03:5303:53, 4 September 2022 diff hist +36‎ m Category:3D Printing ‎ →‎History: linking to reprap
03:5203:52, 4 September 2022 diff hist +3,628‎ N Category:3D Printing ‎ Created page with "At MAG Laboratory, we maintain a collection of 3d printers assigned to different capabilities and materials. This page serves as an overview for our history, procedures, and..."
03:5103:51, 4 September 2022 diff hist +5‎ m Monoprice Maker Select 3D Printer V2 ‎ placed picture for the IIIP
02:5702:57, 4 September 2022 diff hist −1‎ m Template:3D DigitalFabrication ‎No edit summary
02:5702:57, 4 September 2022 diff hist −12‎ m Template:3D DigitalFabrication ‎No edit summary
02:5602:56, 4 September 2022 diff hist −35‎ m Template:3D DigitalFabrication ‎No edit summary
02:3502:35, 4 September 2022 diff hist +4‎ m Category:Activities ‎ finally created a link for 3d printing
02:1402:14, 4 September 2022 diff hist +37‎ m Template:3D DigitalFabrication ‎ added creality image
02:1102:11, 4 September 2022 diff hist +2‎ m Creality CR10S ‎ changed creality picture
02:1002:10, 4 September 2022 diff hist +59‎ N File:Creality CR10.jpg ‎ Image of the Creality CR10S at MAG Laboratory
01:4401:44, 4 September 2022 diff hist +539‎ m Creality CR10S ‎ →‎Operator's Log

13:5513:55, 3 September 2022 diff hist 0‎ 12" Axial Ventilation Fan ‎ →‎Found Fan Speeds current

21:4521:45, 2 September 2022 diff hist +282‎ m Creality CR10S ‎ →‎Operator's Log: Logging activity on 2022-09-02

16:4616:46, 28 August 2022 diff hist +505‎ m Creality CR10S ‎ Operator's log added. Entries added to operator's log.

10:1610:16, 23 August 2022 diff hist +96‎ m Creality CR10S ‎ →‎Bed

16:2516:25, 21 August 2022 diff hist 0‎ m Midori ‎ edited dimensions of cat picture gallery and added another picture of midori current
16:2316:23, 21 August 2022 diff hist +23‎ m Midori ‎ added midori pictures
16:2116:21, 21 August 2022 diff hist 0‎ N File:Midori Eating.jpg ‎No edit summary current
16:1416:14, 21 August 2022 diff hist −64‎ MAGLab:About ‎ →‎Extra Officers: Ben is not the vice president
16:0716:07, 21 August 2022 diff hist +24‎ m Epson Perfection V550 Photo Scanner ‎ forgot to add the equipment tag current
16:0616:06, 21 August 2022 diff hist +2,749‎ N Epson Perfection V550 Photo Scanner ‎ Created page with "{| class="wikitable" style="float:right;" !Epson Perfection V550 Photo Scanner |- |300px '''Ownership:''' Mag Laboratory '''Status:''' Fu..."
15:1615:16, 21 August 2022 diff hist +49‎ m Category:Equipment ‎ →‎Planar Image Handling
15:1515:15, 21 August 2022 diff hist +24‎ m Dake MEP Cobra 350 Cold Cut Saw ‎No edit summary current
15:1415:14, 21 August 2022 diff hist +24‎ m Mantis Stereo Microscope ‎No edit summary current
15:1315:13, 21 August 2022 diff hist +23‎ m K40 Laser Cutter ‎ added to equipment
15:1215:12, 21 August 2022 diff hist +33‎ N Equipment ‎ Blu moved page Equipment to Category:Equipment: should be a category current Tag: New redirect
15:1215:12, 21 August 2022 diff hist 0‎ m Category:Equipment ‎ Blu moved page Equipment to Category:Equipment: should be a category

12:1912:19, 3 August 2022 diff hist −5‎ m IT Notes ‎ →‎Wireguard
11:5811:58, 3 August 2022 diff hist +405‎ m IT Notes ‎ →‎MAG Laboratory IT Services: Added wireguard VPN
11:5011:50, 3 August 2022 diff hist 0‎ m IT Notes ‎ →‎MAG Laboratory IT Services: Alphabetized
09:5309:53, 3 August 2022 diff hist +69‎ m MAGLab:About ‎ →‎Extra Officers
09:5109:51, 3 August 2022 diff hist +170‎ N User talk:Blu ‎ Created page with "Have you considered updating your MAG Laboratory profile with the words "Magical (cat) girl (boy)?" --~~~~" current
09:5009:50, 3 August 2022 diff hist +124‎ m MAG Cat ‎No edit summary
09:4009:40, 3 August 2022 diff hist −250‎ Board of Directors ‎ Redirected page to MAGLab:About current Tag: New redirect
09:4009:40, 3 August 2022 diff hist +281‎ m MAGLab:About ‎No edit summary
09:3709:37, 3 August 2022 diff hist +1,556‎ N MAGLab:About ‎ Created page with "== Bylaws == The bylaws which govern MAGLaboratory may be found at the link below. [https://drive.google.com/file/d/1uZHUAkbRsP4-Q9rlHZhcD0tWlm3aSuvZ/view?usp=sharing Bylaws..."
09:3509:35, 3 August 2022 diff hist +291‎ m Category:Policy ‎No edit summary
08:5308:53, 3 August 2022 diff hist +261‎ m Board of Directors ‎No edit summary

11:3211:32, 31 July 2022 diff hist +26‎ m Creality CR10S ‎No edit summary
11:3211:32, 31 July 2022 diff hist +456‎ m Creality CR10S ‎No edit summary
11:2611:26, 31 July 2022 diff hist +603‎ N Creality CR10S ‎ Created page with "{| class="wikitable" style="float:right;" !Creality-CR10S |- | 300px '''Location:''' Electronics Room '''Ownership:''' MAG Laboratory ..."
11:1911:19, 31 July 2022 diff hist +26‎ m QiDi X-Plus 3D Printer ‎ added to 3d printer category
11:0711:07, 31 July 2022 diff hist +153‎ m Monoprice Maker Select 3D Printer V2 ‎ separated sections and added namesake information
11:0311:03, 31 July 2022 diff hist +1,368‎ Zortrax M200 3D Printer ‎ Added zortrax information
10:4110:41, 31 July 2022 diff hist +2,076‎ N Monoprice Maker Select 3D Printer V2 ‎ added basic IIIP information
07:4807:48, 31 July 2022 diff hist +501‎ m QiDi X-Plus 3D Printer ‎ added 3d printer block
06:4906:49, 31 July 2022 diff hist +69‎ m Category:Equipment ‎ →‎Powered Hand Tools
06:3006:30, 31 July 2022 diff hist +60‎ m Template:3D DigitalFabrication ‎ added the creality, alphabetized
06:2106:21, 31 July 2022 diff hist +118‎ m IT Notes ‎ →‎The Internet of Trash and Single-Board Computers: added the IIIP
06:1906:19, 31 July 2022 diff hist +356‎ m QiDi X-Plus 3D Printer ‎ added small details about the printer

17:0617:06, 26 July 2022 diff hist +207‎ m 12" Axial Ventilation Fan ‎ →‎Current Usage: Added UI images
17:0017:00, 26 July 2022 diff hist 0‎ N File:HAL Display Fan Advanced.png ‎No edit summary current
16:5916:59, 26 July 2022 diff hist 0‎ N File:HAL Display Fan Simple.png ‎No edit summary current
16:5716:57, 26 July 2022 diff hist +377‎ m 12" Axial Ventilation Fan ‎ →‎Current Usage: Added predetermined fan speeds.
14:2014:20, 26 July 2022 diff hist +272‎ m Category:Activities ‎No edit summary
14:1314:13, 26 July 2022 diff hist +34‎ Category:Main Page ‎No edit summary
14:0014:00, 26 July 2022 diff hist +18‎ m Category:Equipment ‎ →‎Metalworking
13:5913:59, 26 July 2022 diff hist +24‎ m CNC Mill ‎No edit summary
13:5913:59, 26 July 2022 diff hist −19‎ m CNC Mill ‎No edit summary
13:5713:57, 26 July 2022 diff hist −2‎ m Category:Equipment ‎ →‎Metalworking: Finally added CNC
13:5413:54, 26 July 2022 diff hist +40‎ N File:Martin-1.jpg ‎ Blu moved page File:Martin-1.jpg to File:Tiger-vs-Martin-1.jpg: file naming scheme not good current Tag: New redirect
13:5413:54, 26 July 2022 diff hist 0‎ m File:Tiger-vs-Martin-1.jpg ‎ Blu moved page File:Martin-1.jpg to File:Tiger-vs-Martin-1.jpg: file naming scheme not good current
13:5213:52, 26 July 2022 diff hist +36‎ N File:Chilling.jpg ‎ Blu moved page File:Chilling.jpg to File:Cats Chilling.jpg: file naming scheme not good current Tag: New redirect
13:5213:52, 26 July 2022 diff hist 0‎ m File:Cats Chilling.jpg ‎ Blu moved page File:Chilling.jpg to File:Cats Chilling.jpg: file naming scheme not good current
13:5113:51, 26 July 2022 diff hist +35‎ N File:Light.jpg ‎ Blu moved page File:Light.jpg to File:Midori Light.jpg: file naming scheme not good current Tag: New redirect
13:5113:51, 26 July 2022 diff hist 0‎ m File:Midori Light.jpg ‎ Blu moved page File:Light.jpg to File:Midori Light.jpg: file naming scheme not good current
13:4813:48, 26 July 2022 diff hist +40‎ m HAL ‎ →‎Photo Gallery
13:4613:46, 26 July 2022 diff hist +9‎ m Category:Equipment ‎ →‎Other
13:4413:44, 26 July 2022 diff hist +30‎ m Template:3D DigitalFabrication ‎No edit summary
13:3813:38, 26 July 2022 diff hist +28‎ m Midori ‎ change gallery height
13:3613:36, 26 July 2022 diff hist 0‎ m Phoebe Blackjaw ‎No edit summary
13:3313:33, 26 July 2022 diff hist +192‎ m Phoebe Blackjaw ‎ gallery reorganization
13:2713:27, 26 July 2022 diff hist +85‎ m MAG Cat ‎No edit summary
13:2013:20, 26 July 2022 diff hist −21‎ Midori ‎ fixed formatting
13:1313:13, 26 July 2022 diff hist +78‎ m Category:Cats ‎ cat gallery aestheticized and linkized current
13:0813:08, 26 July 2022 diff hist +2‎ m Tiger II ‎No edit summary current
13:0113:01, 26 July 2022 diff hist 0‎ File:HAL001.jpg ‎ Blu uploaded a new version of File:HAL001.jpg current
12:5812:58, 26 July 2022 diff hist −6‎ m HAL ‎No edit summary
12:5712:57, 26 July 2022 diff hist +155‎ m HAL ‎No edit summary
12:4012:40, 26 July 2022 diff hist +33‎ N Main Page ‎ Redirected page to Category:Main Page current Tag: New redirect
12:3512:35, 26 July 2022 diff hist +20‎ m Materials ‎ formatting change in "nearby shops" current
12:3112:31, 26 July 2022 diff hist −25‎ m Template:3D DigitalFabrication ‎ linking to the 3d printer category was a mistake.
12:2912:29, 26 July 2022 diff hist +1‎ m Category:Activities ‎No edit summary
12:2812:28, 26 July 2022 diff hist +74‎ m Category:Activities ‎ blurb about not being projects.
12:2612:26, 26 July 2022 diff hist +36‎ N Talk:Projects ‎ Blu moved page Talk:Projects to Category talk:Projects current Tag: New redirect
12:2612:26, 26 July 2022 diff hist 0‎ m Category talk:Projects ‎ Blu moved page Talk:Projects to Category talk:Projects current
12:2612:26, 26 July 2022 diff hist +32‎ N Projects ‎ Blu moved page Projects to Category:Projects current Tag: New redirect
12:2612:26, 26 July 2022 diff hist 0‎ m Category:Projects ‎ Blu moved page Projects to Category:Projects current
12:2512:25, 26 July 2022 diff hist +172‎ m Category:Projects ‎ added description blurb
12:2412:24, 26 July 2022 diff hist +24‎ m Category:Notes ‎ Added to main page category current
12:2412:24, 26 July 2022 diff hist +8‎ m PCB notes ‎ added to category notes and category projects current
12:2312:23, 26 July 2022 diff hist +179‎ N Category:Policy ‎ Created page with "MAG Laboratory is built on a system of general and specific rules. == General Rules == # Don't be a dick. # Don't make us make more rules. # Safety third. Category:Main_Pa..."
12:2012:20, 26 July 2022 diff hist +21‎ m Welding Policy ‎No edit summary current
12:1812:18, 26 July 2022 diff hist +24‎ m Category:Activities ‎ Added to main page category
12:1712:17, 26 July 2022 diff hist +24‎ m Meeting Minutes ‎ Added to main page category current
12:1712:17, 26 July 2022 diff hist +24‎ m Category:Cats ‎ Added to main page category
12:1312:13, 26 July 2022 diff hist +20‎ m IT Notes ‎ added to category notes
12:1212:12, 26 July 2022 diff hist +20‎ m Space Tour Notes ‎ added to category notes current
12:1212:12, 26 July 2022 diff hist +132‎ N Category:Notes ‎ Created page with "This page contains Wiki-documented notes from MAG Laboratory. These notes are from contributions from members like you. Thank you."
12:1012:10, 26 July 2022 diff hist +24‎ m Library ‎ Added to main page category current
12:0912:09, 26 July 2022 diff hist +24‎ m Category:Projects ‎ Added to main page category
12:0812:08, 26 July 2022 diff hist −11‎ m Materials ‎ Added to main page category
12:0612:06, 26 July 2022 diff hist +27‎ m Kossel Delta 3D Printer ‎No edit summary current
12:0612:06, 26 July 2022 diff hist +211‎ m Template:3D DigitalFabrication ‎No edit summary
11:5811:58, 26 July 2022 diff hist −11‎ m Category:Equipment ‎ Added to main page category
11:5711:57, 26 July 2022 diff hist +26‎ N Upcoming Competitions ‎ Blu moved page Upcoming Competitions to Competitions: Not all competitions are upcoming current Tag: New redirect
11:5711:57, 26 July 2022 diff hist 0‎ m Competitions ‎ Blu moved page Upcoming Competitions to Competitions: Not all competitions are upcoming current
11:5611:56, 26 July 2022 diff hist −11‎ m Events ‎ Added to main page category current
11:5411:54, 26 July 2022 diff hist +488‎ m Competitions ‎ formatted contests into table
11:3811:38, 26 July 2022 diff hist −83‎ m Membership ‎ Removed dead paypal links. Also added to main page. current
11:3611:36, 26 July 2022 diff hist +18‎ N MediaWiki:Mainpage ‎ Created page with "Category:Main_Page" current
11:3411:34, 26 July 2022 diff hist +728‎ N Category:Main Page ‎ Main Page should be a category instead of its own page. This way, categorized pages can be listed on the main page.
11:2911:29, 26 July 2022 diff hist +75‎ m 12" Axial Ventilation Fan ‎ →‎Picture Gallery: Added later pictures
11:2611:26, 26 July 2022 diff hist +53‎ N File:VFD Nameplate.jpg ‎ This is a picture of the VFD nameplate. current
11:2311:23, 26 July 2022 diff hist +122‎ N File:AFF Baldor 3ph.jpg ‎ This is a picture of the three-phase axial flow fan motor which allows us to use variable frequency control. current
11:2111:21, 26 July 2022 diff hist +93‎ N File:Old Hal Board.jpg ‎ This is the old HAL board which was swapped out for a new board with protection current

01:4101:41, 25 July 2022 diff hist −48‎ m HAL ‎ →‎History: Apparently, temperature sensor network restarts were implemented in 2021
01:4001:40, 25 July 2022 diff hist +193‎ m HAL ‎ →‎2021: Added details about the LT3960
00:5700:57, 25 July 2022 diff hist +108‎ m HAL ‎ →‎2022
00:5400:54, 25 July 2022 diff hist +345‎ m HAL ‎ Updated with more diagrams and 2022 history so far
00:1500:15, 25 July 2022 diff hist +17‎ N File:HAL001.jpg ‎No edit summary
00:0300:03, 25 July 2022 diff hist −114‎ m 12" Axial Ventilation Fan ‎ →‎Future Usage
00:0200:02, 25 July 2022 diff hist −93‎ m 12" Axial Ventilation Fan ‎ →‎Current Usage: Including VFD control on the HAL display

10:2610:26, 27 June 2022 diff hist +536‎ m IT Notes ‎ Added more notes

06:5006:50, 20 June 2022 diff hist +98‎ m IT Notes ‎ →‎Containers: added VPN

02:2202:22, 19 June 2022 diff hist +130‎ m IT Notes ‎ →‎MAG Laboratory IT Services: Added Google Drive link
01:2701:27, 19 June 2022 diff hist +457‎ m IT Notes ‎ →‎MAG Laboratory IT Services
01:0501:05, 19 June 2022 diff hist +94‎ IT Notes ‎ →‎Containers

03:0503:05, 11 June 2022 diff hist +59‎ m IT Notes ‎ →‎Containers: Added wailord

21:1721:17, 27 May 2022 diff hist +58‎ IT Notes ‎ →‎Containers
03:0303:03, 27 May 2022 diff hist +65‎ m IT Notes ‎ change order and wording

06:1506:15, 25 May 2022 diff hist +291‎ m IT Notes ‎ Added Virtual Machine Cluster

11:0311:03, 16 May 2022 diff hist 0‎ m IT Notes ‎ →‎IP Assignment on the MAG Laboratory Network
11:0211:02, 16 May 2022 diff hist +66‎ IT Notes ‎ →‎The Internet of Trash and Single-Board Computers
10:5610:56, 16 May 2022 diff hist +7‎ m IT Notes ‎ →‎Containers: changed connor description
10:5510:55, 16 May 2022 diff hist +1,760‎ IT Notes ‎ Added a listing of IT services that users may be interested in.

05:3805:38, 6 May 2022 diff hist +55‎ IT Notes ‎ →‎Containers

14:3714:37, 2 May 2022 diff hist +238‎ IT Notes ‎ →‎IP Assignment on the MAG Laboratory Network
02:1102:11, 2 May 2022 diff hist +134‎ Tiger II ‎ →‎Tiger's Spay Return
02:1002:10, 2 May 2022 diff hist +110‎ Tiger II ‎No edit summary

11:2411:24, 3 February 2022 diff hist +99‎ m IT Notes ‎ →‎The Routers
11:0211:02, 3 February 2022 diff hist +64‎ m IT Notes ‎ →‎The Internet of Trash and Single-Board Computers
11:0111:01, 3 February 2022 diff hist +260‎ m IT Notes ‎ →‎IP Assignment on the MAG Laboratory Network
10:0110:01, 3 February 2022 diff hist +1,424‎ N IT Notes ‎ Created page with "These are notes that somebody told User:Blu to create. == Accounts on MAG Laboratory == Getting an account on this wiki is meant to be difficult. '''todo:''' ''image here..."
05:2405:24, 3 February 2022 diff hist 0‎ Meeting Minutes ‎No edit summary
05:1105:11, 3 February 2022 diff hist 0‎ Category:Projects ‎No edit summary

13:2613:26, 18 December 2021 diff hist +43‎ m HAL ‎ →‎2021
13:2513:25, 18 December 2021 diff hist +49‎ m HAL ‎ updated the 2021 history

03:2203:22, 6 September 2021 diff hist +573‎ N Dake MEP Cobra 350 Cold Cut Saw ‎ added title block
02:5802:58, 6 September 2021 diff hist +4‎ m Category:Equipment ‎ dake saw has a page
02:5602:56, 6 September 2021 diff hist 0‎ m File:DakeMEPCobra350ColdCutSaw.png ‎ wrong saw model current
02:5602:56, 6 September 2021 diff hist +48‎ N File:DakeMEPCobra250ColdCutSaw.png ‎ Blu moved page File:DakeMEPCobra250ColdCutSaw.png to File:DakeMEPCobra350ColdCutSaw.png: wrong saw model current Tag: New redirect
02:5602:56, 6 September 2021 diff hist 0‎ m File:DakeMEPCobra350ColdCutSaw.png ‎ Blu moved page File:DakeMEPCobra250ColdCutSaw.png to File:DakeMEPCobra350ColdCutSaw.png: wrong saw model
02:5502:55, 6 September 2021 diff hist 0‎ m Category:Equipment ‎ correcting the dake cold cut saw

00:3500:35, 5 September 2021 diff hist +326‎ HAL ‎ →‎History

20:2120:21, 28 June 2021 diff hist +73‎ m Materials ‎No edit summary
20:1420:14, 28 June 2021 diff hist +189‎ N Category:Activities ‎ placeholder blurb written

05:0405:04, 11 June 2021 diff hist +7‎ m 12" Axial Ventilation Fan ‎ →‎Modbus code reference: code edit
03:5603:56, 11 June 2021 diff hist 0‎ m 12" Axial Ventilation Fan ‎ →‎Modbus code reference: changed address

05:5005:50, 2 June 2021 diff hist +293‎ m 12" Axial Ventilation Fan ‎No edit summary
05:4605:46, 2 June 2021 diff hist +22‎ m 12" Axial Ventilation Fan ‎No edit summary
05:4405:44, 2 June 2021 diff hist +2‎ m 12" Axial Ventilation Fan ‎No edit summary
05:2905:29, 2 June 2021 diff hist +800‎ 12" Axial Ventilation Fan ‎ added VFD content
03:2903:29, 2 June 2021 diff hist −1‎ m Category:Equipment ‎ →‎Other: Fan Picture placed

01:0101:01, 28 May 2021 diff hist +88‎ m K40 Laser Cutter ‎ air assist nozzle

02:4002:40, 10 April 2021 diff hist +2,164‎ N Space Tour Notes ‎ Created page with "This page is dedicated to providing a short summary of the talking points that a space tour would have == Kitchen == The kitchen is an area at the head of the space where ref..."

01:1001:10, 30 March 2021 diff hist +114‎ K40 Laser Cutter ‎ →‎History

09:3009:30, 16 March 2021 diff hist +1,447‎ Tiger II ‎ added Tiger stories and updated medical history.
09:1709:17, 16 March 2021 diff hist −9‎ Tiger II ‎No edit summary

07:4607:46, 24 February 2021 diff hist +14‎ m Category:Equipment ‎ updated pictures
07:1707:17, 24 February 2021 diff hist −8‎ m 12" Axial Ventilation Fan ‎ added images
07:1507:15, 24 February 2021 diff hist +65‎ m K40 Laser Cutter ‎ →‎Gallery
07:1207:12, 24 February 2021 diff hist +47‎ N File:12"AFF Fan.jpg ‎ The fan on the 12" Axial Flow Fan current
07:1107:11, 24 February 2021 diff hist +51‎ N File:12"AFF 1PhMotor.jpg ‎ 12" Axial Flow Fan single phase motor current
07:1107:11, 24 February 2021 diff hist +43‎ N File:12"AFF Belt.jpg ‎ The 12" Axial Flow Fan's belt current
07:0907:09, 24 February 2021 diff hist +305‎ K40 Laser Cutter ‎ →‎Gallery
06:5706:57, 24 February 2021 diff hist +2‎ m Category:Equipment ‎ →‎Planar Image Handling: Added epson v550 scanner

19:2519:25, 16 February 2021 diff hist +91‎ N File:K40 AirAssistPump.jpg ‎ The air assist pump for the K40 Kodak UltraMax400 Nikon FE Nikon 28-70 f/2.8 current
04:3304:33, 16 February 2021 diff hist +57‎ K40 Laser Cutter ‎No edit summary
04:3304:33, 16 February 2021 diff hist +118‎ N File:K40 CuttingAssembly.jpg ‎ The K40 cutting assembly with air assist installed - Kodak UltraMax 400 - Nikon FE - Nikon 28-70 f/2.8 current
04:3104:31, 16 February 2021 diff hist +104‎ m K40 Laser Cutter ‎ added images
04:2704:27, 16 February 2021 diff hist +104‎ N File:K40 InteriorAirAssist.jpg ‎ K40 interior with air assist Taken with Kodak Ultramax 400 - Nikon FE - Nikon 28-70 f/2.8 current
04:2104:21, 16 February 2021 diff hist +119‎ N File:K40 CuttingNeoprene.jpg ‎ The K40 laser cutter cutting neoprene rubber Taken on Kodak UltraMax 400 - Nikon FE - Nikon 28-70 f/2.8 current
04:1004:10, 16 February 2021 diff hist +5‎ Template:3D DigitalFabrication ‎No edit summary
04:0804:08, 16 February 2021 diff hist +39‎ N File:MP.jpg ‎ Blu moved page File:MP.jpg to File:MP MakerSelectV2.jpg current Tag: New redirect
04:0804:08, 16 February 2021 diff hist 0‎ m File:MP MakerSelectV2.jpg ‎ Blu moved page File:MP.jpg to File:MP MakerSelectV2.jpg current
04:0804:08, 16 February 2021 diff hist +102‎ m File:MP MakerSelectV2.jpg ‎No edit summary
04:0604:06, 16 February 2021 diff hist 0‎ N File:MP MakerSelectV2.jpg ‎No edit summary
04:0204:02, 16 February 2021 diff hist +16‎ m 12" Axial Ventilation Fan ‎ added images
03:5803:58, 16 February 2021 diff hist +114‎ N File:AxialVentilationFan.jpg ‎ Picture of the Axial Ventilation fan. Taken with Kodak UltraMax 400. - Nikon FE - Nikon 28-70 f/2.8 current

15:4515:45, 8 February 2021 diff hist +119‎ N File:MartinResting.jpg ‎ Picture of Martin the cat. Taken on Kodak Vision3 500T 5219 with the Nikon FE and the Nikon 28-70 f/2.8. current

12:1312:13, 7 February 2021 diff hist +134‎ N File:K40LaserCutterWithAirAssist.jpg ‎ The K40 laser cutter with air assist installed. Taken on Kodak 500T with the Nikon FE using the Nikon 28-70 AF-s f/2.8. current
12:1112:11, 7 February 2021 diff hist +110‎ N File:K40LaserCutterThermometer.jpg ‎ The K40 laser cutter thermometer taken on Kodak 250D on the Nikon FE with the Nikon 28-70 f/2.8. current
12:0812:08, 7 February 2021 diff hist +124‎ N File:K40LaserCutterLidOpen.jpg ‎ The K40 laser cutter with the lid open taken with Kodak 250D on the Nikon FE with the Nikon AF-s 28-70 f/2.8. current
12:0612:06, 7 February 2021 diff hist +109‎ N File:K40LaserCutterControlBoards.jpg ‎ K40 laser cutter control boards taken on Kodak 250D with the Nikon using the Nikon 28-70 f/2.8. current
12:0312:03, 7 February 2021 diff hist +97‎ N File:K40LaserCutterPSU.jpg ‎ The K40 PSU taken with Kodak 250D on the Nikon FE using the Nikon AF-s 28-70 f/2.8. current
12:0112:01, 7 February 2021 diff hist +84‎ N File:K40LaserCutterTube.jpg ‎ Taken with Kodak 250D on the Nikon FE with the Nikon 28-70 f/2.8 AF-s. current
11:5511:55, 7 February 2021 diff hist 0‎ N File:FilmProcessingEquipment.jpg ‎No edit summary current
11:5311:53, 7 February 2021 diff hist +73‎ m File:FilmEpsonV550.jpg ‎ added summary current
11:5211:52, 7 February 2021 diff hist 0‎ N File:FilmEpsonV550.jpg ‎No edit summary

13:5713:57, 6 February 2021 diff hist +5‎ m File:K40 LaserCutter.jpg ‎No edit summary current
13:5613:56, 6 February 2021 diff hist +49‎ m File:Tiger II.jpg ‎No edit summary current
13:5513:55, 6 February 2021 diff hist 0‎ m File:3DQiDi.jpg ‎No edit summary current
10:5810:58, 6 February 2021 diff hist +130‎ N QiDi X-Plus 3D Printer ‎ Created page with "TODO == Other 3D Printers == This is a part of our ongoing effort to document our 3D printers. {{Template:3D_DigitalFabrication}}"
10:5510:55, 6 February 2021 diff hist +158‎ m Zortrax M200 3D Printer ‎No edit summary
10:5410:54, 6 February 2021 diff hist +48‎ m Template:3D DigitalFabrication ‎No edit summary
10:2910:29, 6 February 2021 diff hist +47‎ m Template:3D DigitalFabrication ‎ included qidi printer and made link for the X-plus
10:2710:27, 6 February 2021 diff hist +20‎ Template:3D DigitalFabrication ‎ Undo revision 1496 by Blu (talk) Tag: Undo
10:2710:27, 6 February 2021 diff hist −161‎ m Category:Equipment ‎ →‎Digital Fabrication
10:2710:27, 6 February 2021 diff hist −20‎ Template:3D DigitalFabrication ‎No edit summary
10:2610:26, 6 February 2021 diff hist +320‎ N Template:3D DigitalFabrication ‎ Created page with "<noinclude>This is a template for the 3D Digital Fabrication Gallery with links!</noinclude> <gallery> File:Zortrax1.jpeg|Zortrax M200 3D Printer File:Kossel.jpeg|Kossel..."
10:2010:20, 6 February 2021 diff hist +67‎ N File:3DQiDi.jpg ‎ The qidi 3d printer Taken on Kodak 5219 Vision3 500T
10:1510:15, 6 February 2021 diff hist +76‎ N File:TigWelding.jpg ‎ Tig Welding by User:Sphynx Taken on Fuji Superia Xtra 400 current

17:5217:52, 3 February 2021 diff hist −5‎ m Phoebe Blackjaw ‎No edit summary
17:5117:51, 3 February 2021 diff hist −6‎ Phoebe Blackjaw ‎ →‎About Blackjaw, By Brandon
17:4817:48, 3 February 2021 diff hist +59‎ m Phoebe Blackjaw ‎No edit summary
17:4817:48, 3 February 2021 diff hist +45‎ N File:PhoebeBlackjawDeflated.jpg ‎ Even Bond villains need a break current
17:4517:45, 3 February 2021 diff hist +53‎ m Phoebe Blackjaw ‎No edit summary
17:4517:45, 3 February 2021 diff hist 0‎ N File:PhoebeBlackjawBackside.jpg ‎No edit summary current
17:4317:43, 3 February 2021 diff hist +64‎ m MAG Cat ‎No edit summary
17:4017:40, 3 February 2021 diff hist +83‎ N File:MartinComputerUse.jpg ‎ Martin fell asleep while using the computer to shop for more cat food current
17:3617:36, 3 February 2021 diff hist +42‎ m Category:Cats ‎ added twocat image
17:3517:35, 3 February 2021 diff hist +121‎ N File:TwoCatAlgorithm.jpg ‎ Have you ever heard of the twofish algorithm? Well, I would like to introduce you to the twocat algorithm. current
17:3417:34, 3 February 2021 diff hist +28‎ N Cats ‎ Blu moved page Cats to Category:Cats: should belong in a category instead current Tag: New redirect
17:3417:34, 3 February 2021 diff hist 0‎ m Category:Cats ‎ Blu moved page Cats to Category:Cats: should belong in a category instead
17:3217:32, 3 February 2021 diff hist +139‎ m MAG Cat ‎ added photos and added to category
17:3117:31, 3 February 2021 diff hist +79‎ N File:MartinTech.jpg ‎ Martin is quite familiar with technology... mostly sitting on it. current
17:2817:28, 3 February 2021 diff hist +50‎ N File:MartinCloseup.jpg ‎ A closeup shot of Martin Luther Kat. current
17:2117:21, 3 February 2021 diff hist +19‎ m Tiger II ‎ added to the cat category
17:1517:15, 3 February 2021 diff hist +59‎ m Phoebe Blackjaw ‎No edit summary
17:1117:11, 3 February 2021 diff hist +154‎ m Phoebe Blackjaw ‎ added more photos of blackjaw
17:0617:06, 3 February 2021 diff hist +130‎ N File:PhoebeBlackjawPosing.jpg ‎ Phoebe Blackjaw in MAG Laboratory posing for her profile photo on the backdrop of her natural environment: the shop. current
17:0517:05, 3 February 2021 diff hist +51‎ N File:PhoebeBlackjawFangs.jpg ‎ Phoebe Blackjaw showing off her fangs current
17:0417:04, 3 February 2021 diff hist +114‎ N File:PhoebeBlackjawCloseup.jpg ‎ Phoebe Blackjaw Posing For her Closeup Taken on the Pentax Q10 + Metabones Q666 + Nikon 55mm f/1.2. current
16:5816:58, 3 February 2021 diff hist +19‎ m Phoebe Blackjaw ‎ added to cat category
16:5716:57, 3 February 2021 diff hist +208‎ m Phoebe Blackjaw ‎ added princess photos
16:5416:54, 3 February 2021 diff hist +3‎ m Category:Cats ‎ added blackjaw image
16:5316:53, 3 February 2021 diff hist 0‎ N File:PrincessBlackjawPosing.jpg ‎No edit summary current
16:5216:52, 3 February 2021 diff hist 0‎ N File:PrincessBlackjawWithDirt.jpg ‎No edit summary current
16:5216:52, 3 February 2021 diff hist 0‎ N File:PrincessBlackjawOnCouch.jpg ‎No edit summary current
15:3615:36, 3 February 2021 diff hist +23‎ K40 Laser Cutter ‎No edit summary
14:0114:01, 3 February 2021 diff hist +35‎ K40 Laser Cutter ‎ →‎Air Assist Upgrades
14:0114:01, 3 February 2021 diff hist +12‎ m K40 Laser Cutter ‎ →‎Air Assist Upgrades
14:0014:00, 3 February 2021 diff hist +40‎ m K40 Laser Cutter ‎ →‎Laser Path
13:5613:56, 3 February 2021 diff hist 0‎ N File:K40DragChainBracket.stl ‎No edit summary current
13:2913:29, 3 February 2021 diff hist +12‎ MAG Lab Wings Light ‎No edit summary current
13:1313:13, 3 February 2021 diff hist −7‎ MAG Lab Wings Light ‎No edit summary
13:0913:09, 3 February 2021 diff hist −2‎ MAG Lab Wings Light ‎No edit summary
12:4812:48, 3 February 2021 diff hist −4‎ Phoebe Blackjaw ‎ removed false link. We do not plan to have a page for tails.
12:4812:48, 3 February 2021 diff hist +1,669‎ N Phoebe Blackjaw ‎ Phoebe Blackjaw
12:4512:45, 3 February 2021 diff hist +47‎ N File:PrincessBlackjaw.jpg ‎ Princess Blackjaw likes bicycles. current
12:4412:44, 3 February 2021 diff hist +47‎ N File:PhoebeBlackjawKitten.jpg ‎ Kitten related to Phoebe Blackjaw current
12:4212:42, 3 February 2021 diff hist +52‎ N File:PhoebeBlackjawEatingWithKitten.jpg ‎ Phoebe Blackjaw eating with her kitten current
12:4112:41, 3 February 2021 diff hist +66‎ N File:PhoebeBlackjawRelaxing.jpg ‎ Phoebe Blackjaw relaxing on the MAGLab pleated couch current
12:3212:32, 3 February 2021 diff hist +154‎ N File:PhoebeBlackjaw.jpg ‎ Phoebe Blackjaw taken on the Nikon FE with the Nikon 55mm f/1.2 on Kodak Ektar 100 pushed +1. Processed and scanned at World Photo in Brea. current
12:0212:02, 3 February 2021 diff hist +251‎ MAG Lab Wings Light ‎No edit summary
12:0112:01, 3 February 2021 diff hist 0‎ N File:WingsLight.svg ‎No edit summary current
11:5911:59, 3 February 2021 diff hist +90‎ N File:WingsLight.stl ‎ MAG Lab gear created with fusion360 with m5 bolt holes. Print two of these. current
10:5910:59, 3 February 2021 diff hist +581‎ N MAG Lab Wings Light ‎ Created page with "{| class="wikitable" style="float:right;" |+MAG Lab Wings Light |300px '''Status:''' Fully Working |- !Light |- | '''Location:''' Art..."
10:5810:58, 3 February 2021 diff hist +134‎ N File:WingsLightGear.jpg ‎ First iteration of the MAG Lab Wings Light Taken on Fuji Superia X-tra 400 with the Nikon FE with the Nikon 55mm f/1.2. current
10:5110:51, 3 February 2021 diff hist 0‎ N File:WingsLightBareLamp.jpg ‎No edit summary current
10:4810:48, 3 February 2021 diff hist +6‎ Category:Projects ‎No edit summary
10:4710:47, 3 February 2021 diff hist +57‎ N File:WingsLightDesign.png ‎ The design of the wings light in fusion 360 current
10:2710:27, 3 February 2021 diff hist +31‎ Category:Projects ‎No edit summary
10:0510:05, 3 February 2021 diff hist +1‎ Tiger II ‎No edit summary
10:0410:04, 3 February 2021 diff hist +1,152‎ N Tiger II ‎ Tiger II
10:0010:00, 3 February 2021 diff hist +249‎ MAG Cat ‎No edit summary
09:5409:54, 3 February 2021 diff hist −3‎ Category:Cats ‎No edit summary
09:5309:53, 3 February 2021 diff hist +107‎ N File:Tiger II.jpg ‎ Image of Tiger taken with Kodak Vision3 250D 4307 on the Nikon FE with the Nikon 28-70 f/2.8.
09:5009:50, 3 February 2021 diff hist +4‎ MAG Cat ‎No edit summary
09:5009:50, 3 February 2021 diff hist +21‎ N Martin Luther Cat ‎ Redirected page to MAG Cat current Tag: New redirect
09:4909:49, 3 February 2021 diff hist +17‎ MAG Cat ‎No edit summary
09:4709:47, 3 February 2021 diff hist +692‎ MAG Cat ‎No edit summary
09:4009:40, 3 February 2021 diff hist +412‎ MAG Cat ‎No edit summary
09:3709:37, 3 February 2021 diff hist +48‎ K40 Laser Cutter ‎ →‎Gallery
09:3409:34, 3 February 2021 diff hist +114‎ N File:K40 Interior.jpg ‎ The interior of the K40 taken with Fuji Superia X-Tra 400 on the Nikon FE and the Nikon 28-70 f/2.8. current
09:2209:22, 3 February 2021 diff hist −4‎ Category:Cats ‎No edit summary
09:2209:22, 3 February 2021 diff hist +259‎ N Category:Cats ‎ Created page with "This page redirects to the various cats that have been at MAG Lab. <gallery> File:Magcatbagcat.jpg|MAG Cat File:Placeholder.jpg|Tiger File:Placeholder.jpg|Phoebe Bla..."
08:2908:29, 3 February 2021 diff hist +202‎ 12" Axial Ventilation Fan ‎No edit summary

04:5104:51, 29 January 2021 diff hist +155‎ 12" Axial Ventilation Fan ‎No edit summary

11:1011:10, 28 January 2021 diff hist +261‎ N Shade Structure ‎ Created page with "== Background == The space gets hot during the summer. It is debated about how summer heat radiates into the space. It was theorized that space heat is largely from the ceil..." current
11:0811:08, 28 January 2021 diff hist +69‎ Category:Projects ‎No edit summary
11:0411:04, 28 January 2021 diff hist +111‎ 12" Axial Ventilation Fan ‎No edit summary
11:0211:02, 28 January 2021 diff hist +1,258‎ N 12" Axial Ventilation Fan ‎ questionable pedigree
10:3410:34, 28 January 2021 diff hist +51‎ Category:Equipment ‎No edit summary

05:2005:20, 27 January 2021 diff hist +132‎ File:K40 LaserCutter.jpg ‎No edit summary
05:1805:18, 27 January 2021 diff hist +210‎ K40 Laser Cutter ‎ →‎History: Added broken mirror and air assist drag chain

11:2611:26, 3 January 2021 diff hist +48‎ MAG Cat ‎No edit summary
11:2011:20, 3 January 2021 diff hist +1‎ Events ‎No edit summary
11:2011:20, 3 January 2021 diff hist +82‎ Events ‎No edit summary
11:1911:19, 3 January 2021 diff hist +20‎ Events ‎No edit summary
11:1711:17, 3 January 2021 diff hist +59‎ Category:Projects ‎ →‎Past Projects
11:1611:16, 3 January 2021 diff hist +161‎ InFocus Swivel Stand ‎ Undo revision 1076 by Mark r (talk) current Tag: Undo
11:1311:13, 3 January 2021 diff hist +2‎ Vacuum Oven ‎No edit summary current
11:1211:12, 3 January 2021 diff hist +93‎ N Vacuum Oven ‎ Created page with "TODO == Settings and Materials == TODO == Manuals == [File:A652-01-880.pdf Vacuum Pump PDF]"
11:1011:10, 3 January 2021 diff hist 0‎ Category:Equipment ‎No edit summary
11:0111:01, 3 January 2021 diff hist +106‎ Kossel Delta 3D Printer ‎No edit summary
10:5910:59, 3 January 2021 diff hist +43‎ N File:Kossel4.jpg ‎ Kossel running before selling current
10:5810:58, 3 January 2021 diff hist +35‎ N File:Kossel3.jpg ‎ Kossel before selling current
10:2910:29, 3 January 2021 diff hist −11‎ User:BLu ‎ Redirected page to User:Blu current Tag: New redirect
10:2310:23, 3 January 2021 diff hist +58‎ User:Blu ‎No edit summary
10:2210:22, 3 January 2021 diff hist +25‎ User:Blu ‎No edit summary
10:2010:20, 3 January 2021 diff hist 0‎ N File:Blu.jpeg ‎No edit summary current
10:1710:17, 3 January 2021 diff hist +929‎ N User:Blu ‎ Created page with "Hello, you have stumbled on the wiki homepage of Brandon. == Current Role in MAG Lab == As of the annual meeting in 2020, I continue to serve MAG Laboratory as its CTO. Pl..."
09:4509:45, 3 January 2021 diff hist +835‎ N Film Development ‎ Created page with "== Purpose == MAG Laboratory has expanded into the "Artists" in MAG. As part of this effort, MAG Laboratory is developing negative film. == Equipment == TODO <gallery> File:..." current
09:0409:04, 3 January 2021 diff hist +34‎ Category:Projects ‎No edit summary
09:0309:03, 3 January 2021 diff hist +34‎ m Category:Projects ‎ →‎Current Projects: added lazor
08:5608:56, 3 January 2021 diff hist +1,205‎ N K40 Laser Cutter ‎ Created page with "{| class="wikitable" style="float:right;" |+Chinesium K40 Laser Cutter |300px '''Location:''' Electronics Room '''Ownership:''' Mag Lab..."
08:3208:32, 3 January 2021 diff hist +46‎ Category:Equipment ‎ →‎Digital Fabrication
08:3008:30, 3 January 2021 diff hist +72‎ N File:K40 LaserCutter.jpg ‎ A photo of the K40 laser cutter take on Kodak Vision3 250D

22:5522:55, 17 December 2020 diff hist +40‎ Category:Equipment ‎No edit summary
22:2622:26, 17 December 2020 diff hist +40‎ N File:Dialarc.jpeg ‎ The MAGLab big blue welder current

12:5012:50, 11 November 2020 diff hist +6‎ Category:Equipment ‎No edit summary
12:4812:48, 11 November 2020 diff hist 0‎ m Category:Projects ‎No edit summary
12:4712:47, 11 November 2020 diff hist +40‎ Category:Projects ‎No edit summary
12:4412:44, 11 November 2020 diff hist +81‎ Kossel Delta 3D Printer ‎No edit summary
12:4312:43, 11 November 2020 diff hist −12‎ Kossel Delta 3D Printer ‎No edit summary

10:0810:08, 17 October 2020 diff hist +1‎ Kossel Delta 3D Printer ‎ →‎Gallery
10:0710:07, 17 October 2020 diff hist +5‎ Kossel Delta 3D Printer ‎No edit summary
10:0510:05, 17 October 2020 diff hist +74‎ Kossel Delta 3D Printer ‎ added gallery

00:4700:47, 6 October 2020 diff hist −1‎ Kossel Delta 3D Printer ‎No edit summary
00:4600:46, 6 October 2020 diff hist −134‎ Kossel Delta 3D Printer ‎No edit summary
00:3800:38, 6 October 2020 diff hist +958‎ Kossel Delta 3D Printer ‎No edit summary

23:4323:43, 4 October 2020 diff hist +119‎ Category:Equipment ‎No edit summary
23:3623:36, 4 October 2020 diff hist +863‎ Category:Equipment ‎ Added arts and Office

09:1309:13, 26 July 2020 diff hist +155‎ HAL ‎No edit summary
08:1408:14, 26 July 2020 diff hist +6‎ HAL ‎No edit summary
08:1308:13, 26 July 2020 diff hist +123‎ HAL ‎No edit summary
08:1108:11, 26 July 2020 diff hist +58‎ N File:HAL 2020 synoptic view.png ‎ A synoptic view of HAL on the MAGLab website current
08:0808:08, 26 July 2020 diff hist +65‎ N File:HAL 2020 hardware upgrade.jpeg ‎ HAL has been upgraded to have a new mounting plate. current
08:0008:00, 26 July 2020 diff hist −1‎ Kossel Delta 3D Printer ‎No edit summary
07:5707:57, 26 July 2020 diff hist +1,025‎ HAL ‎No edit summary

20:3920:39, 20 September 2019 diff hist 0‎ Zortrax M200 3D Printer ‎No edit summary
02:4502:45, 20 September 2019 diff hist +12‎ Zortrax M200 3D Printer ‎No edit summary
02:1602:16, 20 September 2019 diff hist −4‎ Category:Equipment ‎ →‎Powered Hand Tools
02:1502:15, 20 September 2019 diff hist +1‎ Category:Equipment ‎No edit summary
02:1402:14, 20 September 2019 diff hist +8‎ Category:Equipment ‎No edit summary
02:0902:09, 20 September 2019 diff hist +6‎ PACE MBT-100 Desoldering Station ‎No edit summary current
02:0502:05, 20 September 2019 diff hist 0‎ N File:PACE-MBT100-Station.jpeg ‎No edit summary current
02:0202:02, 20 September 2019 diff hist +386‎ PACE MBT-100 Desoldering Station ‎No edit summary

18:2518:25, 11 September 2019 diff hist +36‎ Meeting Minutes ‎No edit summary
18:2418:24, 11 September 2019 diff hist +253‎ Meeting Minutes ‎No edit summary

17:4217:42, 5 September 2019 diff hist +6‎ m Kossel Delta 3D Printer ‎No edit summary
17:4117:41, 5 September 2019 diff hist +41‎ Kossel Delta 3D Printer ‎No edit summary
17:3917:39, 5 September 2019 diff hist −92‎ Kossel Delta 3D Printer ‎ Removed bed leveling section.

01:5201:52, 19 May 2019 diff hist +63‎ N File:A652-01-880.pdf ‎ Vacuum Pump Documentation for the RV3 vacuum pump current

03:4003:40, 20 September 2018 diff hist +33‎ N User:BLu ‎ Created page with "Current webmaster. Kind of lazy."
03:3903:39, 20 September 2018 diff hist +753‎ BLu Delta 3D Printer ‎No edit summary

04:5804:58, 19 September 2018 diff hist +4‎ Category:Equipment ‎No edit summary
04:5604:56, 19 September 2018 diff hist +62‎ N HAL ‎ Created page with "HAL is MAG Laboratory's motion, door, and open status monitor."

02:2302:23, 11 September 2018 diff hist +70‎ Category:Projects ‎No edit summary

20:0320:03, 10 September 2018 diff hist +2‎ BLu Delta 3D Printer ‎No edit summary
20:0220:02, 10 September 2018 diff hist −6‎ BLu Delta 3D Printer ‎No edit summary
20:0020:00, 10 September 2018 diff hist 0‎ BLu Delta 3D Printer ‎No edit summary
20:0020:00, 10 September 2018 diff hist +1,076‎ BLu Delta 3D Printer ‎No edit summary

User contributions for Blu

1 April 2024

28 March 2024

17 March 2024

27 February 2024

18 February 2024

17 February 2024

27 January 2024

26 January 2024

25 January 2024

1 January 2024

31 December 2023

28 December 2023

8 December 2023

4 December 2023

15 November 2023

11 November 2023

25 October 2023

5 October 2023

1 October 2023

19 September 2023

12 August 2023

28 July 2023

30 May 2023

13 May 2023

12 May 2023

4 May 2023

4 April 2023

1 April 2023

27 March 2023

19 March 2023

13 March 2023

25 January 2023

19 January 2023

18 January 2023

15 January 2023

13 January 2023

6 January 2023

31 December 2022

30 December 2022

29 December 2022

22 December 2022

18 December 2022

16 December 2022

15 December 2022

14 December 2022

13 December 2022

12 December 2022

9 December 2022

7 December 2022

4 December 2022

2 December 2022

1 December 2022

28 November 2022

15 October 2022

10 October 2022

23 September 2022

19 September 2022

13 September 2022

4 September 2022

3 September 2022

2 September 2022

28 August 2022

23 August 2022

21 August 2022

3 August 2022

31 July 2022

26 July 2022

25 July 2022

27 June 2022

20 June 2022

19 June 2022

11 June 2022

27 May 2022

25 May 2022

16 May 2022

6 May 2022

2 May 2022

3 February 2022

18 December 2021