Uploads by Blu
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 04:29, 28 March 2024 | Example CNC Milling ch552 usbc RS.jpg (file) |  |
251 KB | MAG Laboratory Milled and Assembled CH552 test board with USB-C connector | 1 |
| 11:59, 17 February 2024 | Flatcam islands.png (file) |  |
274 KB | A screenshot showing undesired islands that form when the isolation settings are not entered correctly | 1 |
| 03:21, 1 January 2024 | Flatcam screenshot.png (file) |  |
290 KB | 1 | |
| 11:22, 18 January 2023 | Zortrax CalibrationBOA.jpg (file) |  |
2 MB | https://www.thingiverse.com/thing:287033 Printed by the Zortrax in ABS. Left cube is at 250C, right cube is at 240C. | 1 |
| 10:18, 31 December 2022 | Pulse XE.jpg (file) |  |
2.17 MB | Pulse XE printer in its enclosure. Taken on 2022-12-31. | 1 |
| 10:10, 31 December 2022 | M200 2022-12-31.jpg (file) |  |
1.92 MB | chatlowpoly printed on the Zortrax M200 on 2022-12-31 as a qualification print | 1 |
| 08:14, 14 December 2022 | M200 Fan2 Fan3.jpg (file) |  |
2.93 MB | 1 | |
| 09:29, 23 September 2022 | PulseXE First ChatLowPoly.jpg (file) |  |
306 KB | The first cat out of the Pulse XE. Layer adhesion issues galore. | 1 |
| 04:33, 4 September 2022 | Creality CR10.jpg (file) |  |
1.58 MB | straightened and color corrected | 2 |
| 04:22, 4 September 2022 | Brandon pinhole photograph.jpg (file) |  |
511 KB | Brandon's pinhole camera photograph of a weir and bridge in Snow Creek Park | 1 |
| 16:21, 21 August 2022 | Midori Eating.jpg (file) |  |
256 KB | 1 | |
| 17:00, 26 July 2022 | HAL Display Fan Advanced.png (file) |  |
13 KB | 1 | |
| 16:59, 26 July 2022 | HAL Display Fan Simple.png (file) |  |
12 KB | 1 | |
| 13:01, 26 July 2022 | HAL001.jpg (file) |  |
37 KB | Resized to a more manageable size for embedding onto pages with a border. | 2 |
| 11:26, 26 July 2022 | VFD Nameplate.jpg (file) |  |
2.43 MB | This is a picture of the VFD nameplate. | 1 |
| 11:23, 26 July 2022 | AFF Baldor 3ph.jpg (file) |  |
2.38 MB | This is a picture of the three-phase axial flow fan motor which allows us to use variable frequency control. | 1 |
| 11:21, 26 July 2022 | Old Hal Board.jpg (file) |  |
5.01 MB | This is the old HAL board which was swapped out for a new board with protection | 1 |
| 07:12, 24 February 2021 | 12"AFF Fan.jpg (file) |  |
2.58 MB | The fan on the 12" Axial Flow Fan | 1 |
| 07:11, 24 February 2021 | 12"AFF 1PhMotor.jpg (file) |  |
1.97 MB | 12" Axial Flow Fan single phase motor | 1 |
| 07:11, 24 February 2021 | 12"AFF Belt.jpg (file) |  |
2.23 MB | The 12" Axial Flow Fan's belt | 1 |
| 19:25, 16 February 2021 | K40 AirAssistPump.jpg (file) |  |
7.56 MB | The air assist pump for the K40 Kodak UltraMax400 Nikon FE Nikon 28-70 f/2.8 | 1 |
| 04:33, 16 February 2021 | K40 CuttingAssembly.jpg (file) |  |
7.58 MB | The K40 cutting assembly with air assist installed - Kodak UltraMax 400 - Nikon FE - Nikon 28-70 f/2.8 | 1 |
| 04:27, 16 February 2021 | K40 InteriorAirAssist.jpg (file) |  |
7.49 MB | K40 interior with air assist Taken with Kodak Ultramax 400 - Nikon FE - Nikon 28-70 f/2.8 | 1 |
| 04:21, 16 February 2021 | K40 CuttingNeoprene.jpg (file) |  |
5.92 MB | The K40 laser cutter cutting neoprene rubber Taken on Kodak UltraMax 400 - Nikon FE - Nikon 28-70 f/2.8 | 1 |
| 04:06, 16 February 2021 | MP MakerSelectV2.jpg (file) |  |
5.89 MB | 1 | |
| 03:58, 16 February 2021 | AxialVentilationFan.jpg (file) |  |
9.48 MB | Picture of the Axial Ventilation fan. Taken with Kodak UltraMax 400. - Nikon FE - Nikon 28-70 f/2.8 | 1 |
| 15:45, 8 February 2021 | MartinResting.jpg (file) |  |
7.9 MB | Picture of Martin the cat. Taken on Kodak Vision3 500T 5219 with the Nikon FE and the Nikon 28-70 f/2.8. | 1 |
| 12:13, 7 February 2021 | K40LaserCutterWithAirAssist.jpg (file) |  |
2.13 MB | The K40 laser cutter with air assist installed. Taken on Kodak 500T with the Nikon FE using the Nikon 28-70 AF-s f/2.8. | 1 |
| 12:11, 7 February 2021 | K40LaserCutterThermometer.jpg (file) |  |
686 KB | The K40 laser cutter thermometer taken on Kodak 250D on the Nikon FE with the Nikon 28-70 f/2.8. | 1 |
| 12:08, 7 February 2021 | K40LaserCutterLidOpen.jpg (file) |  |
6.76 MB | The K40 laser cutter with the lid open taken with Kodak 250D on the Nikon FE with the Nikon AF-s 28-70 f/2.8. | 1 |
| 12:06, 7 February 2021 | K40LaserCutterControlBoards.jpg (file) |  |
6.59 MB | K40 laser cutter control boards taken on Kodak 250D with the Nikon using the Nikon 28-70 f/2.8. | 1 |
| 12:03, 7 February 2021 | K40LaserCutterPSU.jpg (file) |  |
5.36 MB | The K40 PSU taken with Kodak 250D on the Nikon FE using the Nikon AF-s 28-70 f/2.8. | 1 |
| 12:01, 7 February 2021 | K40LaserCutterTube.jpg (file) |  |
2.43 MB | Taken with Kodak 250D on the Nikon FE with the Nikon 28-70 f/2.8 AF-s. | 1 |
| 11:55, 7 February 2021 | FilmProcessingEquipment.jpg (file) |  |
5.4 MB | 1 | |
| 11:52, 7 February 2021 | FilmEpsonV550.jpg (file) |  |
5.25 MB | 1 | |
| 10:20, 6 February 2021 | 3DQiDi.jpg (file) |  |
6.51 MB | The qidi 3d printer Taken on Kodak 5219 Vision3 500T | 1 |
| 10:15, 6 February 2021 | TigWelding.jpg (file) |  |
5.73 MB | Tig Welding by User:Sphynx Taken on Fuji Superia Xtra 400 | 1 |
| 17:48, 3 February 2021 | PhoebeBlackjawDeflated.jpg (file) |  |
2.56 MB | Even Bond villains need a break | 1 |
| 17:45, 3 February 2021 | PhoebeBlackjawBackside.jpg (file) |  |
3.95 MB | 1 | |
| 17:40, 3 February 2021 | MartinComputerUse.jpg (file) |  |
4.03 MB | Martin fell asleep while using the computer to shop for more cat food | 1 |
| 17:35, 3 February 2021 | TwoCatAlgorithm.jpg (file) |  |
2.49 MB | Have you ever heard of the twofish algorithm? Well, I would like to introduce you to the twocat algorithm. | 1 |
| 17:31, 3 February 2021 | MartinTech.jpg (file) |  |
807 KB | Martin is quite familiar with technology... mostly sitting on it. | 1 |
| 17:28, 3 February 2021 | MartinCloseup.jpg (file) |  |
1.37 MB | A closeup shot of Martin Luther Kat. | 1 |
| 17:06, 3 February 2021 | PhoebeBlackjawPosing.jpg (file) |  |
4.36 MB | Phoebe Blackjaw in MAG Laboratory posing for her profile photo on the backdrop of her natural environment: the shop. | 1 |
| 17:05, 3 February 2021 | PhoebeBlackjawFangs.jpg (file) |  |
3.19 MB | Phoebe Blackjaw showing off her fangs | 1 |
| 17:04, 3 February 2021 | PhoebeBlackjawCloseup.jpg (file) |  |
3.02 MB | Phoebe Blackjaw Posing For her Closeup Taken on the Pentax Q10 + Metabones Q666 + Nikon 55mm f/1.2. | 1 |
| 16:53, 3 February 2021 | PrincessBlackjawPosing.jpg (file) |  |
105 KB | 1 | |
| 16:52, 3 February 2021 | PrincessBlackjawWithDirt.jpg (file) |  |
2.72 MB | 1 | |
| 16:52, 3 February 2021 | PrincessBlackjawOnCouch.jpg (file) |  |
4.14 MB | 1 | |
| 13:56, 3 February 2021 | K40DragChainBracket.stl (file) |  |
76 KB | 1 |
