Monoprice Maker Select 3D Printer V2: Difference between revisions

From MAGLab
Jump to navigation Jump to search
(added basic IIIP information)
 
m (separated sections and added namesake information)
Line 7: Line 7:
'''Ownership:''' MAG Laboratory <br/>
'''Ownership:''' MAG Laboratory <br/>
'''Status:''' Fully Operational <br/>
'''Status:''' Fully Operational <br/>
'''Usage Restrictions:''' Will be swapped with a prusamax once it arrives
'''Usage Restrictions:''' Will be swapped with <br/>the prusamax once it arrives
|-
|-
!3D Printer
!3D Printer
Line 25: Line 25:
|}
|}


== Summary ==
== Introductory Information ==
=== Leveling Journey ===
=== Leveling Journey ===
The IIIP was donated by Jeff after it failed to level for too long after a glass build plate upgrade.  It was indeed nonlinear to level even with our best 3d printer technicians.
The IIIP was donated by Jeff after it failed to level for too long after a glass build plate upgrade.  It was indeed nonlinear to level even with our best 3d printer technicians.
Line 33: Line 33:
It leveled fine with the glass build plate removed and an adhesive PEI sheet applied.
It leveled fine with the glass build plate removed and an adhesive PEI sheet applied.


=== Behind the Name ===
Since the stylized Monoprice logo looks like IIIP, this printer is nicknamed the IIIP.
== Components ==
=== Hotend Journey ===
=== Hotend Journey ===
The hotend is currently "upgraded" with a chinesium bimetal hotend.  There is a stainless steel heatbreak section which is threaded (and locked with JB-weld) onto a copper section where the thermistor cooling is.  We do not have formal testing data to show if the heatbreak performs better or worse than the original PTFE-lined hotend.  The original PTFE-lined hotend and compatible extruder tip should still be stored in a plastic bag somewhere in the electronics room.
The hotend is currently "upgraded" with a chinesium bimetal hotend.  There is a stainless steel heatbreak section which is threaded (and locked with JB-weld) onto a copper section where the thermistor cooling is.  We do not have formal testing data to show if the heatbreak performs better or worse than the original PTFE-lined hotend.  The original PTFE-lined hotend and compatible extruder tip should still be stored in a plastic bag somewhere in the electronics room.

Revision as of 11:07, 31 July 2022

Monoprice Maker Select V2 3D Printer (IIIP)

Placeholder.jpg
Location: Electronics Room
Ownership: MAG Laboratory
Status: Fully Operational
Usage Restrictions: Will be swapped with
the prusamax once it arrives

3D Printer

Brand: Monoprice (MP)
Model: Maker Select V2
Type: Cartesian
Quality: Hobby
Build Volume:

  • Length: 200mm
  • Width: 200mm
  • Height: 180mm

Materials: ABS, PLA
Nozzle Size 0.4mm

Introductory Information

Leveling Journey

The IIIP was donated by Jeff after it failed to level for too long after a glass build plate upgrade. It was indeed nonlinear to level even with our best 3d printer technicians.

The old formed sheetmetal base was upgraded to a thick aluminum sheetmetal base and leveling was tried with that. It was still relatively nonlinear to level.

It leveled fine with the glass build plate removed and an adhesive PEI sheet applied.

Behind the Name

Since the stylized Monoprice logo looks like IIIP, this printer is nicknamed the IIIP.

Components

Hotend Journey

The hotend is currently "upgraded" with a chinesium bimetal hotend. There is a stainless steel heatbreak section which is threaded (and locked with JB-weld) onto a copper section where the thermistor cooling is. We do not have formal testing data to show if the heatbreak performs better or worse than the original PTFE-lined hotend. The original PTFE-lined hotend and compatible extruder tip should still be stored in a plastic bag somewhere in the electronics room.

The hotend thermistor was deemed inoperable in late 2021, and the printer was placed onto the makerspace "do not fix" list. The software compensation that was applied to the thermistor had it set so hot that the 3d printer would falsely report hotend overheats. It has since been replaced as part of a creality and IIIP thermistor replacement project in 2022-07-20.

Other 3D Printers

This is a part of our ongoing effort to document our 3D printers.