12" Axial Ventilation Fan: Difference between revisions

From MAGLab
Jump to navigation Jump to search
No edit summary
No edit summary
Line 28: Line 28:
== Current Usage ==
== Current Usage ==
Please plug in the ceiling fan when the laser cutter is running.
Please plug in the ceiling fan when the laser cutter is running.
== Future Usage ==
The ceiling fan is planned to also vent from the 3d printers when the ABS fume extraction apparati are installed.  Please wait warmly.


== Picture Gallery ==
== Picture Gallery ==

Revision as of 04:51, 29 January 2021

12" Axial Ventilation Fan
Placeholder.jpg

Location: On the Ceiling towards the back
Ownership: Mag Laboratory
Status: Fully Working / Upgrades Pending
Required By: Turn on while using laser cutter

Fan

Brand: Unknown
Model: Unknown
Quality: Industrial
Watts: 420W

Background

The 12" Axial Ventilation ceiling fan of questionable pedigree is in a sheet metal and fiberboard enclosure of questionable pedigree.

In the time when droplets of water fall from the sky, the fan enclosure leaks water into the interior of the makerspace. Nobody knows why.

The ceiling fan is placed on a ceiling perforation that was made before the industrial unit was rented by the makerspace. The perforation was originally for an 18" turbine ventilator.

Underneath the ceiling perforation, a plenum box of similarly questionable pedigree was constructed out of paper-backed foam board found in the dumpster.

Current Usage

Please plug in the ceiling fan when the laser cutter is running.

Future Usage

The ceiling fan is planned to also vent from the 3d printers when the ABS fume extraction apparati are installed. Please wait warmly.

Picture Gallery