K40 Laser Cutter

From MAGLab
Revision as of 20:45, 25 January 2024 by Blu (talk | contribs) (→‎History)
Jump to navigation Jump to search
Chinesium K40 Laser Cutter
K40 LaserCutter.jpg

Location: Electronics Room
Ownership: Mag Laboratory
Status: Fully Working / Upgrades Pending
Usage Restrictions: Laser Cutter Qualification

Laser Cutter

Brand: Chinesium
Model: K40
Quality: Prosumer/Professional
Cutting Area: 315 x 225 mm
Materials: TODO

Getting Started

Welcome on your laser cutter journey. We at MAG Laboratory are proud to host the venerable and storied K40 laser cutter machine. As we should all know, each K40 machine is a unique snowflake upon this world not only because each factory K40 is manufactured differently but also because each K40 owner will apply different modifications to their machine.

Read at least the "General Use" section of the K40 user manual (link).

General Advice and Precautions

⚠ Always use the air assist.

⚠ Always operate with lid closed.

⚠ Do not let machine "run dry."

⚠ Do not place hand along laser path.

⚠ Ensure laser cooling water temperature is acceptable.

Software Support

The preferred file format is .svg. Inkscape (link) can be used to create and edit svg files it is under active development, so be sure to update your inkscape.

Materials

Recommended Materials

Material Comment
Acrylic Cuts well. Turns into combustion byproducts immediately!
MDF Mostly turns into smoke. Ash may be an issue. Use air assist to clear the ash.
Laser Rubber Ash may be an issue. Use air assist to clear as much ash as possible.
Acetal Plastic Apparently works if the plastic has additives.
Leather Cuts / Engraves.

Banned Materials

Material Comment
PVC Combustion byproducts are literally hydrochloric gas. Do not cut.

History

The K40 is a complex machine with a history of previous activity. Delve into the mysteries of this delightful machine here.

Gallery

Aluminum Air Assist

2021-05-03 "Cloudray" aluminum air assist nozzle installed

Laser Tube

The laser tube was replaced after being broken from a loss of cooling incident on 2021-03-17.

Laser Path

The focusing mirror was broken on 2021-01-26 and subsequently replaced on 2021-02-01.

Air Assist Upgrades

https://www.maglaboratory.org/w/images/9/98/K40DragChainBracket.stl

User:BLu added a drag chain for the air assist on 2021-01-24.

The air assist pump and PLA nozzle were installed on 2021-01-31.

Alignment

User:BLu first aligned the laser on 2020-12-24.

Acquisition

The K40 laser cutter was purchased by User:BLu on 2020-12-03 and arrived at MAG Laboratory on 2020-12-07.

Laser Guidance

Two visible lasers are installed to denote the cutting location of the CO2 laser. The two lasers form a crosshair that marks the location where the CO2 laser beam should hit.

Future Upgrades

The K40 is due for many future upgrades including but not limited to:

  • height adjustable table
  • visible laser cutting locator