Creality CR10S

From MAGLab
Revision as of 11:32, 31 July 2022 by Blu (talk | contribs)
Jump to navigation Jump to search
Creality-CR10S

Placeholder.jpg
Location: Electronics Room
Ownership: MAG Laboratory
Status: Fully Working
Usage Restrictions: N/A

3D Printer

Brand: Creality
Model: CR10S
Type: Cartesian
Quality: Hobby
Build Volume:

  • Length: 300mm
  • Width: 300mm
  • Height: 400mm

Materials: ABS, PLA, PETG
Nozzle Size 0.4mm

History

The Creality-CR10S was donated by Kyle. Thanks.

The glass build bed was donated by Michael.

Hotend

The hotend was previously clogged with a giant blob of PLA. Please watch your prints through the first layer at least. Not all prints will succeed, but you are more likely to succeed after the first layer is printed.

The thermistor on the hotend was replaced on 2022-07-20. Problems were noted in June.

Bed

The build surface was blue tape. The build surface now is the Creality "Carborundum" tempered glass bed.