Creality CR10S

Creality-CR10S
Location: Electronics Room Ownership: MAG Laboratory Status: Fully Working Usage Restrictions: N/A
3D Printer
Brand: Creality Model: CR10S Type: Cartesian Quality: Hobby Build Volume: Length: 300mm Width: 300mm Height: 400mm Materials: ABS, PLA, PETG Nozzle Size 0.4mm

History

The Creality-CR10S was donated by Kyle. Thanks.

The glass build bed was donated by Michael.

Hotend

The hotend was previously clogged with a giant blob of PLA. Please watch your prints through the first layer at least. Not all prints will succeed, but you are more likely to succeed after the first layer is printed.

The thermistor on the hotend was replaced on 2022-07-20. Problems were noted in June.

Bed

The build surface was blue tape. The build surface now is the Creality "Carborundum" tempered glass bed.