BLu Delta 3D Printer: Difference between revisions

From MAGLab
Jump to navigation Jump to search
No edit summary
(Redirected page to Kossel Delta 3D Printer)
Tag: New redirect
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
'''BLu Delta''' is a RepRap Kossel made by Brandon Lu.
#REDIRECT [[Kossel_Delta_3D_Printer]]
 
== General Advice and Precautions ==
It is by no means safe to operate this delta if the user wishes to consider himself a sane and rational human being.
 
Operating this delta would create a situation in which the user ceases to be a sane and rational human being.  The user may become a robot.  Or you may lose your sanity.
 
Either way, ask before using.  The last time somebody used without asking, the extruder was clogged and needed to be unclogged through a two-hour process.
 
=== Precautions ===
Do not let the extruder heat up without a powered fan.  The recommended fan setting is always above 20%.  The printer accepts fan commands in pulse-width-modulated counts ranging from 0 to 255.  Always set the printer to a count of 51 or more counts when the extruder is heated up or it is expected to heat up.
 
== Configuration ==
TODO
 
=== Slic3r ===
TODO
 
=== Cura ===
TODO
 
== Materials ==
 
== History ==
=== Head clogs ===
The printer has been clogged at least five times.  Every clog was because of incorrect heat application and has required specialty repairs.

Latest revision as of 06:06, 26 July 2020