BLu Delta 3D Printer: Difference between revisions

Latest revision as of 06:06, 26 July 2020

Redirect to:

@@ Line 1: / Line 1: @@
-'''BLu Delta''' is a RepRap Kossel made by Brandon Lu.
+#REDIRECT [[Kossel_Delta_3D_Printer]]
-== General Advice and Precautions ==
-It is by no means safe to operate this delta if the user wishes to consider himself a sane and rational human being.
-Operating this delta would create a situation in which the user ceases to be a sane and rational human being.  The user may become a robot.  Or you may lose your sanity.
-Either way, ask before using.  The last time somebody used without asking, the extruder was clogged and needed to be unclogged through a two-hour process.
-=== Precautions ===
-Do not let the extruder heat up without a powered fan.  The recommended fan setting is always above 20%.  The printer gives fan commands in pulse-width-modulated counts ranging from 0 to 255.  Always set the printer to a count of 51 or more counts when the extruder is heated up or you are expecting it to heat up.
-== Configuration ==
-TODO
-=== Slic3r ===
-TODO
-=== Cura ===
-TODO
-== Materials ==
-== History ==
-=== Head clogs ===
-The printer has been clogged at least five times.  Every clog was because of incorrect heat application and has required long-term repairs.