PCB notes: Difference between revisions

From MAGLab
Jump to navigation Jump to search
(Created page with "=PCB making notes= Various notes about PCB making using MAGLabs equipment. ---- ==Laser Etching== Using the laser cutter to remove mask before etching. Minimum feature si...")
 
m (added to category notes and category projects)
 
(One intermediate revision by one other user not shown)
Line 39: Line 39:


==Etching==
==Etching==
[[Category:Notes]][[Category:Projects]]

Latest revision as of 12:24, 26 July 2022

PCB making notes

Various notes about PCB making using MAGLabs equipment.


Laser Etching

Using the laser cutter to remove mask before etching. Minimum feature size of 12 mil can work. Be sure to use ground fill planes in order to minimize amount of material to be removed by laser and etching.

  • Prepare the board by coating with flat black spray paint

Black spraypaint.jpg

  • Export layout as a 600 DPI black and white bitmap. Invert the image as the black portions will be cut away by the laser.
  • Load bitmap into Corel Draw.
  • Configure laser to use 19% power and 50% speed with 500 PPI and raster scan.
  • Laser cut away paint.
  • Scrub away burnt region using toothbrush and toothpaste
  • Success

Pcb laser test2.jpg




Router milling

Using a CNC router to perform isolation milling


Etching