HAL: Difference between revisions

From MAGLab
Jump to navigation Jump to search
No edit summary
No edit summary
Line 10: Line 10:
=== 2020 ===
=== 2020 ===
Synoptic View Implemented
Synoptic View Implemented
[[File:HAL 2020 synoptic view.png|HAL synoptic view 2020]]


HAL internal mounting board added.
HAL internal mounting board added.
[[File:HAL 2020 hardware upgrade.jpeg|thumb|HAL hardware 2020]]


HAL interface & protection board added (See HAL-2 in the [[HAL#Problem Reports|Problem Reports]])
HAL interface & protection board added (See HAL-2 in the [[HAL#Problem Reports|Problem Reports]])

Revision as of 08:13, 26 July 2020

HAL is MAG Laboratory's motion, door, and open status monitor.

Design

HAL is based on the raspberry-pi (one) model B and uses the PI's GPIO pins to interface with the outside world.

There is a hardware design document on Google Drive.


History

2020

Synoptic View Implemented HAL synoptic view 2020

HAL internal mounting board added.

HAL hardware 2020

HAL interface & protection board added (See HAL-2 in the Problem Reports)

2017

HAL was created??? [Needs Confirmation]

Problem Reports

HAL-1 : "Main Door" does not describe the door being monitored

HAL-2 : Haldor Board is not Sufficiently Skookum for Safety

HAL-3 : A synoptic view should be implemented