Uploads by Blu
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 04:29, 28 March 2024 | Example CNC Milling ch552 usbc RS.jpg (file) |  |
251 KB | MAG Laboratory Milled and Assembled CH552 test board with USB-C connector | 1 |
| 11:59, 17 February 2024 | Flatcam islands.png (file) |  |
274 KB | A screenshot showing undesired islands that form when the isolation settings are not entered correctly | 1 |
| 03:21, 1 January 2024 | Flatcam screenshot.png (file) |  |
290 KB | 1 | |
| 11:22, 18 January 2023 | Zortrax CalibrationBOA.jpg (file) |  |
2 MB | https://www.thingiverse.com/thing:287033 Printed by the Zortrax in ABS. Left cube is at 250C, right cube is at 240C. | 1 |
| 10:18, 31 December 2022 | Pulse XE.jpg (file) |  |
2.17 MB | Pulse XE printer in its enclosure. Taken on 2022-12-31. | 1 |
| 10:10, 31 December 2022 | M200 2022-12-31.jpg (file) |  |
1.92 MB | chatlowpoly printed on the Zortrax M200 on 2022-12-31 as a qualification print | 1 |
| 08:14, 14 December 2022 | M200 Fan2 Fan3.jpg (file) |  |
2.93 MB | 1 | |
| 09:29, 23 September 2022 | PulseXE First ChatLowPoly.jpg (file) |  |
306 KB | The first cat out of the Pulse XE. Layer adhesion issues galore. | 1 |
| 04:33, 4 September 2022 | Creality CR10.jpg (file) |  |
1.58 MB | straightened and color corrected | 2 |
| 04:22, 4 September 2022 | Brandon pinhole photograph.jpg (file) |  |
511 KB | Brandon's pinhole camera photograph of a weir and bridge in Snow Creek Park | 1 |
| 16:21, 21 August 2022 | Midori Eating.jpg (file) |  |
256 KB | 1 | |
| 17:00, 26 July 2022 | HAL Display Fan Advanced.png (file) |  |
13 KB | 1 | |
| 16:59, 26 July 2022 | HAL Display Fan Simple.png (file) |  |
12 KB | 1 | |
| 13:01, 26 July 2022 | HAL001.jpg (file) |  |
37 KB | Resized to a more manageable size for embedding onto pages with a border. | 2 |
| 11:26, 26 July 2022 | VFD Nameplate.jpg (file) |  |
2.43 MB | This is a picture of the VFD nameplate. | 1 |
| 11:23, 26 July 2022 | AFF Baldor 3ph.jpg (file) |  |
2.38 MB | This is a picture of the three-phase axial flow fan motor which allows us to use variable frequency control. | 1 |
| 11:21, 26 July 2022 | Old Hal Board.jpg (file) |  |
5.01 MB | This is the old HAL board which was swapped out for a new board with protection | 1 |
| 07:12, 24 February 2021 | 12"AFF Fan.jpg (file) |  |
2.58 MB | The fan on the 12" Axial Flow Fan | 1 |
| 07:11, 24 February 2021 | 12"AFF 1PhMotor.jpg (file) |  |
1.97 MB | 12" Axial Flow Fan single phase motor | 1 |
| 07:11, 24 February 2021 | 12"AFF Belt.jpg (file) |  |
2.23 MB | The 12" Axial Flow Fan's belt | 1 |
| 19:25, 16 February 2021 | K40 AirAssistPump.jpg (file) |  |
7.56 MB | The air assist pump for the K40 Kodak UltraMax400 Nikon FE Nikon 28-70 f/2.8 | 1 |
