File:Central Machinery Belt Disc Sander.JPG: Difference between revisions

Latest revision as of 19:57, 26 July 2020

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	19:57, 26 July 2020		1,564 × 2,566 (963 KB)	KevinYang (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	NIKON CORPORATION
Camera model	NIKON D3000
Exposure time	1/60 sec (0.016666666666667)
F Number	f/4.2
ISO speed rating	400
Date and time of data generation	19:50, 24 February 2018
Lens focal length	26 mm
Orientation	Normal
Horizontal resolution	300 dpi
Vertical resolution	300 dpi
Software used	Windows Photo Editor 10.0.10011.16384
File change date and time	12:54, 26 July 2020
Y and C positioning	Co-sited
Exposure Program	Aperture priority
Exif version	2.21
Date and time of digitizing	19:50, 24 February 2018
Meaning of each component	Y Cb Cr does not exist
Image compression mode	4
APEX exposure bias	−1.6666666666667
Maximum land aperture	4.1 APEX (f/4.14)
Metering mode	Pattern
Light source	Unknown
Flash	Flash did not fire
DateTime subseconds	50
DateTimeOriginal subseconds	50
DateTimeDigitized subseconds	50
Supported Flashpix version	1
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	39 mm
Scene capture type	Standard
Scene control	Low gain up
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Subject distance range	Unknown