BLu Delta 3D Printer: Difference between revisions

From MAGLab
Jump to navigation Jump to search
No edit summary
No edit summary
Line 21: Line 21:


== Materials ==
== Materials ==
=== ABS ===
TODO
=== PLA ===
TODO
=== TPE / TPC ===
Flexible filaments will not work reliably with BLu printer since the printer has a bowden-tube extruder.


== History ==
== History ==
=== Head clogs ===
=== Head clogs ===
The printer has been clogged at least five times.  Every clog was because of incorrect heat application and has required specialty repairs.
The printer has been clogged at least five times.  Every clog was because of incorrect heat application and has required specialty repairs.
== Lending Terms ==
BLu Delta is currently on loan from [[User:BLu]], hereinafter referred to as "owner."
Any member or visitor of MAG Laboratory, heinafter referred to as "user," '''''may''''' use the printer given the included configurations and with modifications of these printer configurations.
Users excluding qualified 3d printer maintainers as defined by the owner '''''shall not''''' attempt alterations or repairs on the printer.
Users excluding qualified 3d printer maintainers as defined by the owner '''''shall not''''' attempt to change filament on the printer.  (Soon to change)

Revision as of 03:39, 20 September 2018

BLu Delta is a RepRap Kossel made by Brandon Lu.

General Advice and Precautions

It is by no means safe to operate this delta if the user wishes to consider himself a sane and rational human being.

Operating this delta would create a situation in which the user ceases to be a sane and rational human being. The user may become a robot. Or you may lose your sanity.

Either way, ask before using. The last time somebody used without asking, the extruder was clogged and needed to be unclogged through a two-hour process.

Precautions

Do not let the extruder heat up without a powered fan. The recommended fan setting is always above 20%. The printer accepts fan commands in pulse-width-modulated counts ranging from 0 to 255. Always set the printer to a count of 51 or more counts when the extruder is heated up or it is expected to heat up.

Configuration

TODO

Slic3r

TODO

Cura

TODO

Materials

ABS

TODO

PLA

TODO

TPE / TPC

Flexible filaments will not work reliably with BLu printer since the printer has a bowden-tube extruder.

History

Head clogs

The printer has been clogged at least five times. Every clog was because of incorrect heat application and has required specialty repairs.

Lending Terms

BLu Delta is currently on loan from User:BLu, hereinafter referred to as "owner."

Any member or visitor of MAG Laboratory, heinafter referred to as "user," may use the printer given the included configurations and with modifications of these printer configurations. Users excluding qualified 3d printer maintainers as defined by the owner shall not attempt alterations or repairs on the printer. Users excluding qualified 3d printer maintainers as defined by the owner shall not attempt to change filament on the printer. (Soon to change)