https://www.maglaboratory.org/w/api.php?action=feedcontributions&user=KevinYang&feedformat=atomMAGLab - User contributions [en]2024-03-29T14:11:00ZUser contributionsMediaWiki 1.39.3https://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=2429Category:Equipment2024-03-16T04:10:33Z<p>KevinYang: Add link to lathe tutorial video</p>
<hr />
<div>==Art==<br />
===Fine Arts===<br />
<gallery><br />
File:Placeholder.jpg|Easel<br />
File:Placeholder.jpg|Paints<br />
</gallery><br />
<br />
===Photography===<br />
<gallery><br />
File:FilmProcessingEquipment.jpg|C-41 Development Chemicals & Tank<br />
File:Placeholder.jpg|Digital Camera Bodies<br />
File:FilmEpsonV550.jpg|Epson Perfection V550 Photo Scanner<br />
File:Placeholder.jpg|Nikon Camera Lenses<br />
</gallery><br />
<br />
==Automotive==<br />
Automotive hand tools are located on the right side of the shelves under the tool wall.<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Bicycle==<br />
Small bicycle tools are in a milk crate on the shelves next to the Pod Bay Door.<br />
* Wheels<br />
** Spoke wrenches<br />
** Wheel truing stand (On pallet racks)<br />
* Brake and shifters<br />
** Cable cutters<br />
* Drivetrain<br />
** Bottom bracket and headset bearing press (On pallet racks)<br />
* Work stand (On the hand-crank forklift)<br />
<br />
==Digital Fabrication==<br />
Digital fabrication equipment is in located in the electronics room.<br />
<gallery><br />
File:K40_LaserCutter.jpg|[[K40 Laser Cutter]]<br />
File:Placeholder.jpg|[[Vacuum Oven]]<br />
</gallery><br />
=== 3D Printers ===<br />
{{3D_DigitalFabrication}}<br />
<br />
==Electronics==<br />
Electronics tools are located in the electronics room.<br />
===Soldering===<br />
<gallery><br />
File:Metcal_Soldering_Station.jpg|Metcal Temperature Controlled Soldering Station<br />
File:CSI_Station1A_Soldering_Station.jpg|CSI Station1A 40W Temperature Controlled Soldering Station<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|link=HAL|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe ([https://youtu.be/lr0IJL5SAzw tutorial video])<br />
File:DakeMEPCobra350ColdCutSaw.png|[[Dake MEP Cobra 350 Cold Cut Saw]]<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:Dialarc.jpeg|Miller Dialarc Welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
File:CNC_Mill_.jpg|link=CNC_Mill|[[CNC Mill]]<br />
</gallery><br />
<br />
==Office==<br />
===Games Consoles===<br />
<gallery><br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
===Projection===<br />
<gallery><br />
File:Placeholder.jpg|NEC V311X Projector<br />
File:Placeholder.jpg|Projector Screens<br />
</gallery><br />
<br />
===Information Technology===<br />
<gallery><br />
File:Placeholder.jpg|MAGLAB-Cryzen<br />
File:Placeholder.jpg|Toaster<br />
</gallery><br />
<br />
===Planar Image Handling===<br />
<gallery><br />
File:FilmEpsonV550.jpg|link=[[Epson Perfection V550 Photo Scanner]]|[[Epson Perfection V550 Photo Scanner]]<br />
File:Placeholder.jpg|HP LaserJet P2035n<br />
</gallery><br />
<br />
===Stationery / Idea Generation Station===<br />
<gallery><br />
File:Placeholder.jpg|Writing Utensils<br />
File:Placeholder.jpg|Paper<br />
File:Placeholder.jpg|DYMO LabelManager 160<br />
</gallery><br />
<br />
==Pneumatic==<br />
Pneumatic hand tools are located in a plastic crate on the floor, under the shelves below the tool wall.<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
File:Central_Pneumatic_46309_Air_Brad_Nailer.JPG|Central Pneumatic 46309 Air Brad Nailer ([[:File:Central_Pneumatic_46309_Air_Brad_Nailer_Nameplate.JPG|Nameplate]])<br />
File:Husky_HDN10400_2-in-1_Nailer_Stapler.JPG|Husky HDN10400 2-in-1 Nailer/Stapler ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG|Nameplate]]) ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG|Specs]])<br />
File:Central_Pneumatic_68029_Air_Stapler.JPG|Central Pneumatic 68029 Air Stapler<br />
File:Central_Pneumatic_Air_Die_Grinder.JPG|Central Pneumatic Air Die Grinder<br />
File:Central_Penumatic_Air_Cutter.JPG|Central Pneumatic Air Cutter<br />
File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG|Central Pneumatic Adjustable Detail Spray Gun<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
Powered hand tools are generally located on and around the tool wall, including the shelves under the tables.<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Ryobi P500 Cordless 5-1/2" Circular Saw with Laser<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Ryobi Cordless Jig Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
File:Placeholder.jpg|SkilSaw Corded Gold-Edition 7-1/4" Circular Saw<br />
File:Craftsman Electric Paint Sprayer.jpg|Craftsman Electric Paint Sprayer ([[:File:Craftsman Electric Paint Sprayer Case.jpg|Case]])<br />
File:Model 47274 Electric Paint Sprayer.jpg|Model 47274 Electric Paint Sprayer<br />
File:Rotozip Spiral Saw.jpg|Rotozip Spiral Saw<br />
File:Craftsman Portable Belt Sander.jpg|Craftsman Portable Belt Sander<br />
File:Craftsman Router Edge Guide and Bits.jpg|Craftsman Router with Edge Guide and box of bits<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Ryobi_BS902_Band_Saw.JPG|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Ryobi RTS12 10" Table Saw<br />
File:Central_Machinery_Belt_Disc_Sander.JPG|Central Machinery 4"x36" Belt/6" Disc Sander<br />
File:Delta Bench Oscillating Spindle Sander.jpg|Delta Bench Oscillating Spindle Sander<br />
File:Drillmaster 2 Inch Benchtop Cutoff Saw.jpg|Drillmaster 2 Inch Benchtop Cutoff Saw<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set ([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
File:Quantrex_Ultrasonic_Cleaner.JPG|Quantrex Ultrasonic Cleaner<br />
File:12"AFF_Fan.jpg|[[12" Axial Ventilation Fan]]<br />
File:Black and Decker 798C Drill Bit Sharpener.jpg|Black and Decker 798C Drill Bit Sharpener<br />
File:Small Portable Drill Press.jpg|Small Portable Drill Press<br />
<br />
</gallery><br />
<br />
[[Category:Main_Page]]</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Policy&diff=2413Category:Policy2024-01-20T07:00:30Z<p>KevinYang: Update bylaws to 2023-12 amended version</p>
<hr />
<div>MAG Laboratory is built on a system of general and specific rules and an organization of people.<br />
<br />
== General Rules ==<br />
# Don't be a dick.<br />
# Don't make us make more rules.<br />
# Safety third.<br />
<br />
== Bylaws ==<br />
The bylaws of MAG Laboratory define it as a nonprofit public benefit corporation and is not organized for the private gain of any person.<br />
<br />
[https://docs.google.com/document/d/1M26_LFftPxbqlX1XDT7mIamJ5B0bEiEqw08Rp3ezwyw/edit?usp=drivesdk Bylaws on Google Drive]<br />
<br />
[[Category:Main_Page]]</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Phoebe_Blackjaw&diff=2399Phoebe Blackjaw2023-09-20T05:19:10Z<p>KevinYang: </p>
<hr />
<div>{| class="wikitable" style="float:right;"<br />
!Phoebe Blackjaw<br />
|-<br />
|[[File:PhoebeBlackjaw.jpg|300px]]<br/><br />
'''Ownership:''' Russ Bain (stolen) <br/><br />
'''Status:''' Inoperative (Sept. 2023) <br/><br />
'''Usage Restrictions:''' She's skittish<br />
|-<br />
!Cat<br />
|- <br />
|<br />
'''Color:''' Black and White <br/><br />
'''Tail:''' Fully Working <br/><br />
'''Birthday/Age:''' Around June 2018 <br/><br />
'''Quality:''' Skittish <br/><br />
'''Materials:''' Cat Food <br/><br />
'''Usage:''' Cat Poop and Distant Curiosity <br/><br />
|-<br />
|}<br />
<br />
<gallery mode=nolines widths=200px heights=300px><br />
File:PhoebeBlackjawRelaxing.jpg|Phoebe Blackjaw relaxing on the pleather couch<br />
File:PhoebeBlackjawCloseup.jpg|Closeup of Blackjaw<br />
File:PhoebeBlackjawFangs.jpg|Fangs<br />
File:PhoebeBlackjawPosing.jpg|Blackjaw posing for her profile photo<br />
File:PhoebeBlackjawBackside.jpg|Blackjaw facing away<br />
File:Chilling.jpg|Chillin' with the Villain<br />
</gallery><br />
<br />
== About Blackjaw, By [[User:Blu|Brandon]] ==<br />
Blackjaw supposedly showed up in a Volkswagen engine compartment or the like at the body shop near the lab. She is a skittish cat who eventually showed up to MAG Laboratory because she wants food. Her first nickname was actually "tiny whiney" since she would always whine about food.<br />
<br />
Once she was familiar enough with the space, was called "Blackjaw" because her jaw is reminiscent of a cybernetic implant attached to her body like that of a Bond villain. Space members were not inclined to change her name when her sex had become known.<br />
<br />
She is known to be one of the best cats to take pictures of because she is always curious about the camera and always looks at the lens.<br />
<br />
== Pregnancy and Kittens ==<br />
<gallery mode=nolines widths=200px heights=300px><br />
PhoebeBlackjawKitten.jpg|Kitten related to Blackjaw<br />
PhoebeBlackjawEatingWithKitten.jpg|Phoebe Blackjaw eating with her kitten<br />
File:PhoebeBlackjawDeflated.jpg|Even villains need a break<br />
</gallery><br />
Blackjaw was not spayed in time and had a litter of kittens. We assume that she had her kittens around the 2019-07-15. She had a grand total of 6 kittens, all of whom have been successfully adopted. <br />
<br />
Their names were:<br />
* Nightwing<br />
* Chonk<br />
* Princess<br />
* Hat<br />
* Maggie<br />
* Nemo<br />
<gallery mode=nolines widths=200px heights=300px><br />
File:Kittens1.jpg|kittens<br />
File:000101babies1.jpg|the little babiesss<br />
File:Kittens2.jpg|kitteennnnnssss<br />
</gallery><br />
<br />
=== Princess Blackjaw ===<br />
<gallery mode=nolines widths=200px heights=300px><br />
PrincessBlackjaw.jpg|Princess likes Bicycles<br />
PrincessBlackjawWithDirt.jpg|Princess playing in the dirt<br />
PrincessBlackjawOnCouch.jpg|Princess on the couch<br />
PrincessBlackjawPosing.jpg|Princess Blackjaw posing for her photoshoot<br />
</gallery><br />
Princess Blackjaw is currently with [[User:Blu|Brandon's]] family.<br />
<br />
[[Category:Cats]]</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=MAG_Cat&diff=2398MAG Cat2023-09-20T05:17:26Z<p>KevinYang: </p>
<hr />
<div>{| class="wikitable" style="float:right;"<br />
!Martin Luther Cat<br />
|-<br />
|[[File:Magcatbagcat.jpg|300px]]<br/><br />
'''Ownership:''' Mag Laboratory <br/><br />
'''Status:''' Missing in Action <br/><br />
'''Usage Restrictions:''' He's an asshole<br />
|-<br />
!Cat<br />
|- <br />
|<br />
'''Color:''' Grey and White <br/><br />
'''[[MAG Cat#Tail|Tail]]:''' Missing <br/><br />
'''Birthday/Age:''' ... Old <br/><br />
'''Quality:''' Tempermental <br/><br />
'''Materials:''' Cat Food <br/><br />
'''Usage:''' Cat Poop and Bad Company <br/><br />
|-<br />
|}<br />
<br />
<gallery mode="nolines" widths="200px"><br />
File:MartinCloseup.jpg|A closeup of Martin<br />
File:MartinTech.jpg|Martin is familiar with technology<br />
File:MartinComputerUse.jpg|Martin falling asleep while browsing<br />
File:Martin-judge.jpg|Martin is judging you<br />
File:MartinResting.jpg|Martin is resting and preparing for murder (of small animals)<br />
File:Martin-punch.jpg|One Punch Martin<br />
</gallery><br />
<br />
== Also Known As ==<br />
* Cat<br />
* [[Martin Luther Cat]]<br />
<br />
== About Martin, By [[User:Blu|Brandon]] ==<br />
Martin is a tsundere. He'll beat you up and call you names, but he likes you at the end of the day. He isn't the smartest cat, but he knows what he wants. If he meows at you and rubs on your leg, he might want something or he might want to say hi. Follow him for a while and he'll usually show you what he wants. Be warned, sometimes he just wants to beat you up because he's realized that he likes you too much for your own good.<br />
<br />
If he gets in your way, you can make stomping noises to startle him or you can pick him up and carry him over your shoulder. Be sure to support his hind legs as well since most cats get a bit irate if they don't have contact with their hind legs.<br />
<br />
==About MAG Cat, By MAG Cat==<br />
,myhucxwqmhjuhjuvjuk<br />
<br />
[[File:Magcatbagcat.jpg|200px|thumb| Be warned! MAG Cat is known to commandeer unattended baggage for his cat-ly business.]] <br />
<br />
== Tail ==<br />
Martin lost his tail due to complications following a probable animal bite. He was more or less confined to the inside of the space for a timespan of at least six months. However, due to an infection as well as Martin repeatedly ripping off the bandage, his tail ended up completely amputated.<br />
<br />
=== Gallery ===<br />
<gallery mode="nolines" widths=200px><br />
File:Cat-sad1.jpg|Martin is sad<br />
File:Cat-sad2.jpg|Martin is very sad<br />
</gallery><br />
<br />
<br />
[[Category:Cats]]</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=2373Category:Equipment2023-04-05T05:05:00Z<p>KevinYang: Add Tim's donated tools and a few of the bike tools</p>
<hr />
<div>==Art==<br />
===Fine Arts===<br />
<gallery><br />
File:Placeholder.jpg|Easel<br />
File:Placeholder.jpg|Paints<br />
</gallery><br />
<br />
===Photography===<br />
<gallery><br />
File:FilmProcessingEquipment.jpg|C-41 Development Chemicals & Tank<br />
File:Placeholder.jpg|Digital Camera Bodies<br />
File:FilmEpsonV550.jpg|Epson Perfection V550 Photo Scanner<br />
File:Placeholder.jpg|Nikon Camera Lenses<br />
</gallery><br />
<br />
==Automotive==<br />
Automotive hand tools are located on the right side of the shelves under the tool wall.<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Bicycle==<br />
Small bicycle tools are in a milk crate on the shelves next to the Pod Bay Door.<br />
* Wheels<br />
** Spoke wrenches<br />
** Wheel truing stand (On pallet racks)<br />
* Brake and shifters<br />
** Cable cutters<br />
* Drivetrain<br />
** Bottom bracket and headset bearing press (On pallet racks)<br />
* Work stand (On the hand-crank forklift)<br />
<br />
==Digital Fabrication==<br />
Digital fabrication equipment is in located in the electronics room.<br />
<gallery><br />
File:K40_LaserCutter.jpg|[[K40 Laser Cutter]]<br />
File:Placeholder.jpg|[[Vacuum Oven]]<br />
</gallery><br />
=== 3D Printers ===<br />
{{3D_DigitalFabrication}}<br />
<br />
==Electronics==<br />
Electronics tools are located in the electronics room.<br />
===Soldering===<br />
<gallery><br />
File:Metcal_Soldering_Station.jpg|Metcal Temperature Controlled Soldering Station<br />
File:CSI_Station1A_Soldering_Station.jpg|CSI Station1A 40W Temperature Controlled Soldering Station<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|link=HAL|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra350ColdCutSaw.png|[[Dake MEP Cobra 350 Cold Cut Saw]]<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:Dialarc.jpeg|Miller Dialarc Welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
File:CNC_Mill_.jpg|link=CNC_Mill|[[CNC Mill]]<br />
</gallery><br />
<br />
==Office==<br />
===Games Consoles===<br />
<gallery><br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
===Projection===<br />
<gallery><br />
File:Placeholder.jpg|NEC V311X Projector<br />
File:Placeholder.jpg|Projector Screens<br />
</gallery><br />
<br />
===Information Technology===<br />
<gallery><br />
File:Placeholder.jpg|MAGLAB-Cryzen<br />
File:Placeholder.jpg|Toaster<br />
</gallery><br />
<br />
===Planar Image Handling===<br />
<gallery><br />
File:FilmEpsonV550.jpg|link=[[Epson Perfection V550 Photo Scanner]]|[[Epson Perfection V550 Photo Scanner]]<br />
File:Placeholder.jpg|HP LaserJet P2035n<br />
</gallery><br />
<br />
===Stationery / Idea Generation Station===<br />
<gallery><br />
File:Placeholder.jpg|Writing Utensils<br />
File:Placeholder.jpg|Paper<br />
File:Placeholder.jpg|DYMO LabelManager 160<br />
</gallery><br />
<br />
==Pneumatic==<br />
Pneumatic hand tools are located in a plastic crate on the floor, under the shelves below the tool wall.<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
File:Central_Pneumatic_46309_Air_Brad_Nailer.JPG|Central Pneumatic 46309 Air Brad Nailer ([[:File:Central_Pneumatic_46309_Air_Brad_Nailer_Nameplate.JPG|Nameplate]])<br />
File:Husky_HDN10400_2-in-1_Nailer_Stapler.JPG|Husky HDN10400 2-in-1 Nailer/Stapler ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG|Nameplate]]) ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG|Specs]])<br />
File:Central_Pneumatic_68029_Air_Stapler.JPG|Central Pneumatic 68029 Air Stapler<br />
File:Central_Pneumatic_Air_Die_Grinder.JPG|Central Pneumatic Air Die Grinder<br />
File:Central_Penumatic_Air_Cutter.JPG|Central Pneumatic Air Cutter<br />
File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG|Central Pneumatic Adjustable Detail Spray Gun<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
Powered hand tools are generally located on and around the tool wall, including the shelves under the tables.<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Ryobi P500 Cordless 5-1/2" Circular Saw with Laser<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Ryobi Cordless Jig Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
File:Placeholder.jpg|SkilSaw Corded Gold-Edition 7-1/4" Circular Saw<br />
File:Craftsman Electric Paint Sprayer.jpg|Craftsman Electric Paint Sprayer ([[:File:Craftsman Electric Paint Sprayer Case.jpg|Case]])<br />
File:Model 47274 Electric Paint Sprayer.jpg|Model 47274 Electric Paint Sprayer<br />
File:Rotozip Spiral Saw.jpg|Rotozip Spiral Saw<br />
File:Craftsman Portable Belt Sander.jpg|Craftsman Portable Belt Sander<br />
File:Craftsman Router Edge Guide and Bits.jpg|Craftsman Router with Edge Guide and box of bits<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Ryobi_BS902_Band_Saw.JPG|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Central_Machinery_Belt_Disc_Sander.JPG|Central Machinery 4"x36" Belt/6" Disc Sander<br />
File:Delta Bench Oscillating Spindle Sander.jpg|Delta Bench Oscillating Spindle Sander<br />
File:Drillmaster 2 Inch Benchtop Cutoff Saw.jpg|Drillmaster 2 Inch Benchtop Cutoff Saw<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set ([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
File:Quantrex_Ultrasonic_Cleaner.JPG|Quantrex Ultrasonic Cleaner<br />
File:Greenworks_1700_Electric_Pressure_Washer.JPG|Greenworks 1700 psi 1.4 GPM Electric Pressure Washer<br />
File:12"AFF_Fan.jpg|[[12" Axial Ventilation Fan]]<br />
File:Black and Decker 798C Drill Bit Sharpener.jpg|Black and Decker 798C Drill Bit Sharpener<br />
File:Small Portable Drill Press.jpg|Small Portable Drill Press<br />
<br />
</gallery><br />
<br />
[[Category:Main_Page]]</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Small_Portable_Drill_Press.jpg&diff=2372File:Small Portable Drill Press.jpg2023-04-05T04:50:33Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Model_47274_Electric_Paint_Sprayer.jpg&diff=2371File:Model 47274 Electric Paint Sprayer.jpg2023-04-05T04:50:07Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Rotozip_Spiral_Saw.jpg&diff=2370File:Rotozip Spiral Saw.jpg2023-04-05T04:50:01Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Drillmaster_2_Inch_Benchtop_Cutoff_Saw.jpg&diff=2369File:Drillmaster 2 Inch Benchtop Cutoff Saw.jpg2023-04-05T04:49:36Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Delta_Bench_Oscillating_Spindle_Sander.jpg&diff=2368File:Delta Bench Oscillating Spindle Sander.jpg2023-04-05T04:49:30Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Craftsman_Router_Edge_Guide_and_Bits.jpg&diff=2367File:Craftsman Router Edge Guide and Bits.jpg2023-04-05T04:49:14Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Craftsman_Portable_Belt_Sander.jpg&diff=2366File:Craftsman Portable Belt Sander.jpg2023-04-05T04:48:53Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Craftsman_Electric_Paint_Sprayer.jpg&diff=2365File:Craftsman Electric Paint Sprayer.jpg2023-04-05T04:48:45Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Craftsman_Electric_Paint_Sprayer_Case.jpg&diff=2364File:Craftsman Electric Paint Sprayer Case.jpg2023-04-05T04:48:20Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Black_and_Decker_798C_Drill_Bit_Sharpener.jpg&diff=2363File:Black and Decker 798C Drill Bit Sharpener.jpg2023-04-05T04:47:31Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Member_Orientation&diff=2318Member Orientation2022-12-28T07:52:55Z<p>KevinYang: Created page with "WIP Category:Main_Page"</p>
<hr />
<div>WIP<br />
<br />
[[Category:Main_Page]]</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=CNC_Mill&diff=2301CNC Mill2022-12-05T05:47:15Z<p>KevinYang: Fix build volume</p>
<hr />
<div>{| class="wikitable" style="float:right;"<br />
!CNC Converted Little Machine Shop Mini-Mill<br />
|-<br />
|[[File:CNC_Mill_.jpg|300px]]<br/><br />
'''Location:''' Machining Area <br/><br />
'''Ownership:''' Breaks Everything (Loan)<br/><br />
'''Status:''' Fully Working <br/><br />
'''Usage Restrictions:''' Preapproval Required?<br />
|-<br />
!CNC Mill<br />
|-<br />
|'''Brand:''' Little Machine Shop <br/><br />
'''Model:''' ??? <br/><br />
'''Coordinate System:''' Cartesian <br/><br />
'''Quality:''' Prosumer/Professional <br/><br />
'''Axis Travel:''' X: 120mm, <br/> Y: 288mm, <br/> Z: 210mm <br/><br />
|-<br />
|}<br />
<br />
The '''Mini-Mill''' is a loan from Mr. "Breaks Everything". <br/><br />
== Standard Operating Procedure ==<br />
CNC Instructions<br />
<br />
1. Turn on Computer<br />
2. Flip power Switch to up Position<br />
3. Turn Estop Clockwise <br />
4. Login User: maglab <br />
Password: magcat<br />
5. Click on “metric” or “merica” for metric or standard interface<br />
6. Click Home All (important, bad things will happen if you don’t<br />
7. Click on file on top left and click open navigate to your g-code file<br />
8. Click on help for help menu<br />
<br />
Notes: <br />
• Do not store g-code locally use USB drive<br />
• If Estop is pressed have to re-home<br />
• Use LinuxCNC post-processor<br />
• Power Off Controller Before Computer<br />
<br />
== Basic Maintenance ==<br />
<br />
== Quirks ==<br />
Conversion was a project.<br />
<br />
== Workpiece Examples==<br />
<br />
== Supplemental Resources ==<br />
<br />
[[Category:Equipment]]</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Main_Page&diff=2289Category:Main Page2022-09-21T06:13:37Z<p>KevinYang: spelling</p>
<hr />
<div>[[File:MagLabWelcome.jpg|600px]]<br />
<br />
MAG Lab is a nonprofit hackerspace in the Pomona, California area. We are a community of technically minded people who love to learn, create and collaborate on making cool things. We want to connect interested members of the local community with equipment and knowledge that they otherwise might not be able to access. No matter what your current skill set or knowledge level, as long as you like to play with technology, there is a place for you here.<br />
<br />
We have business meetings that are open to the public on Tuesday nights at 8:30 PM (Also online, see calendar on the [https://www.maglaboratory.org/ main website]). We also have a hangout with projects on Friday nights 7:30 PM. Feel free to stop by and check us out at one of these times. Please join our mailing list in order to keep up with the latest news!</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Main_Page&diff=2288Category:Main Page2022-09-21T06:13:22Z<p>KevinYang: online meeting</p>
<hr />
<div>[[File:MagLabWelcome.jpg|600px]]<br />
<br />
MAG Lab is a nonprofit hackerspace in the Pomona, California area. We are a community of technically minded people who love to learn, create and collaborate on making cool things. We want to connect interested members of the local community with equipment and knowledge that they otherwise might not be able to access. No matter what your current skill set or knowledge level, as long as you like to play with technology, there is a place for you here.<br />
<br />
We have business meetings that are open to the public on Tuesday nights at 8:30 PM (Also online, see calander on the [https://www.maglaboratory.org/ main website]). We also have a hangout with projects on Friday nights 7:30 PM. Feel free to stop by and check us out at one of these times. Please join our mailing list in order to keep up with the latest news!</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Main_Page&diff=2287Category:Main Page2022-09-21T06:10:55Z<p>KevinYang: Update meeting time</p>
<hr />
<div>[[File:MagLabWelcome.jpg|600px]]<br />
<br />
MAG Lab is a nonprofit hackerspace in the Pomona, California area. We are a community of technically minded people who love to learn, create and collaborate on making cool things. We want to connect interested members of the local community with equipment and knowledge that they otherwise might not be able to access. No matter what your current skill set or knowledge level, as long as you like to play with technology, there is a place for you here.<br />
<br />
We have business meetings that are open to the public on Tuesday nights at 8:30 PM. We also have a hangout with projects on Friday nights 7:30 PM. Feel free to stop by and check us out at one of these times. Please join our mailing list in order to keep up with the latest news!</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Getting_to_MagLab&diff=2286Getting to MagLab2022-09-21T06:06:03Z<p>KevinYang: Created page.</p>
<hr />
<div>MagLab is located in the Big Valley Industrial Park in Pomona, CA. The address is on the [https://www.maglaboratory.org/ main website].<br />
<br />
==By Car==<br />
See the [https://www.maglaboratory.org/ main website] for the address and pictures of the turn-in off Valley Blvd.<br />
<br />
If you're eastbound on Valley Blvd. and miss the first entrance because it sneaked up on 'ya around the curve, don't panic. There are 2nd and 3rd chances into the industrial park a few hundred feet down the road.<br />
<br />
===Parking===<br />
Unreserved parking is located around the concrete island in front of MagLab. There is usually space. Please try to avoid parking in front of of our industrial park neighbors. <br />
<br />
Please also prioritize the limited space directly in front of our unit for handicapped or those loading & unloading projects, unless it looks like you're going to be the only one here for a while. This isn't a big deal though.<br />
<br />
==By Bike==<br />
MagLab is within biking distance from CPP, or anywhere else for that matter, as long as you've got time. However, the only access is via Valley Blvd, which sees moderate traffic. Therefore, it is recommended to be comfortable riding alongside cars and navigating unprotected left-turn lanes. The outer lanes are at least comfortably wide.<br />
<br />
There is a sidewalk along the north side of Valley Blvd which ends a few hundred feet away from the entrance, so you'll have to be on the road for the last stretch. There is no sidewalk along the south side of Valley Blvd.<br />
<br />
===Parking===<br />
There are no bike racks. Feel free to bring your bike inside.<br />
<br />
==By Train==<br />
The closest '''Metrolink''' station is '''Industry'''. (3 mi.)<br />
<br />
The closest '''Metro''' station is '''APU / Citrus College''' serviced by the <span style="background:#FFD700">'''L Line (Gold)'''</span>. (11 to 16 mi.)<br />
<br />
Neither of these options are particularly close, but doable if you're comfortable on a bike. <br />
<br />
==By Bus==<br />
'''Foothill Transit''' has stops along '''Temple Ave''' 0.8 mi (1.35 km) to the East. Covering the remaining distance by bike is recommended over walking.<br />
<br />
==By Foot==<br />
Getting to MagLab by foot is technically possible, but it is a treacherous endeavor because these are no continuous sidewalks to the entrance. You're on your own here. See Google Street view.<br />
<br />
==By Air==<br />
Unfortunately, due to prior incidents, MagLab is not offering aviation services to manned aircraft at this time. However, there are several nearby airports.<br />
<br />
[[Category:Main_Page]]</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Welding_Policy&diff=1594Welding Policy2022-01-26T04:16:36Z<p>KevinYang: Created stug</p>
<hr />
<div>WIP.<br />
<br />
Welding insid??<br />
Where are w3lding curtains?<br />
Why are ppl yelling welding</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=1376Category:Equipment2020-07-26T20:35:45Z<p>KevinYang: /* Pneumatic */ Fix spelling</p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==Automotive==<br />
Automotive hand tools are located on the right side of the shelves under the tool wall.<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Digital Fabrication==<br />
Digital fabrication equipment is in located in the electronics room.<br />
<gallery><br />
File:Zortrax1.jpeg|[[Zortrax M200 3D Printer]]<br />
File:Kossel.jpeg|[[Kossel Delta 3D Printer]]<br />
File:RepRap_Mendel01.png|RepRap Mendel 3D Printer<br />
File:Placeholder.jpg|Monoprice Maker Select 3D Printer V2 (IIIP)<br />
</gallery><br />
<br />
==Electronics==<br />
Electronics tools are located in the electronics room.<br />
===Soldering===<br />
<gallery><br />
File:Metcal_Soldering_Station.jpg|Metcal Temperature Controlled Soldering Station<br />
File:CSI_Station1A_Soldering_Station.jpg|CSI Station1A 40W Adjustable Power Soldering Station<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra250ColdCutSaw.png|Dake MEP Cobra 250 Cold Cut Saw<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
</gallery><br />
<br />
==Pneumatic==<br />
Pneumatic hand tools are located in a plastic crate on the floor, under the shelves below the tool wall.<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
File:Central_Pneumatic_46309_Air_Brad_Nailer.JPG|Central Pneumatic 46309 Air Brad Nailer ([[:File:Central_Pneumatic_46309_Air_Brad_Nailer_Nameplate.JPG|Nameplate]])<br />
File:Husky_HDN10400_2-in-1_Nailer_Stapler.JPG|Husky HDN10400 2-in-1 Nailer/Stapler ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG|Nameplate]]) ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG|Specs]])<br />
File:Central_Pneumatic_68029_Air_Stapler.JPG|Central Pneumatic 68029 Air Stapler<br />
File:Central_Pneumatic_Air_Die_Grinder.JPG|Central Pneumatic Air Die Grinder<br />
File:Central_Penumatic_Air_Cutter.JPG|Central Pneumatic Air Cutter<br />
File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG|Central Pneumatic Adjustable Detail Spray Gun<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
Powered hand tools are generally located on and around the tool wall, including the shelves under the tables.<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Ryobi P500 Cordless 5-1/2" Circular Saw with Laser<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Ryobi Cordless Jig Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Ryobi_BS902_Band_Saw.JPG|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Central_Machinery_Belt_Disc_Sander.JPG|Central Machinery 4"x36" Belt/6" Disc Sander<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set ([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
File:Quantrex_Ultrasonic_Cleaner.JPG|Quantrex Ultrasonic Cleaner<br />
File:Greenworks_1700_Electric_Pressure_Washer.JPG|Greenworks 1700 psi 1.4 GPM Electric Pressure Washer<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Ryobi_9%22_Band_Saw_BS902&diff=1375Ryobi 9" Band Saw BS9022020-07-26T20:30:56Z<p>KevinYang: Add infobox and pic</p>
<hr />
<div>{| class="wikitable" style="float:right;"<br />
|+Ryobi BS902 <br />
|[[File:Ryobi BS902 Band Saw.JPG|300px]]<br/><br />
'''Location:''' Woodworking Area<br/><br />
'''Ownership:''' MagLab<br/><br />
'''Status:''' Fully Working<br/><br />
'''Usage Restrictions:''' Wood only<br />
|-<br />
!Band Saw<br />
|-<br />
| ''Vertical Blade'' <br/><br />
'''Blade Width:''' 1/8" to 3/8" <br/><br />
'''Blade Length:''' 59-1/4" to 59-1/2 <br/><br />
'''Frame to Blade Capacity:''' 9" <br/><br />
'''Cutting Thickness Capacity:''' 3-5/8"<br />
|-<br />
!References<br />
|-<br />
| [https://www.ryobitools.com/support/manuals/details/BS904 User Manual]<br />
|}<br />
<br />
The '''Ryobi BS902 9" Band Saw''' is a light-duty band saw that should be used for cutting wood only. This saw was donated by Mark D.<br />
<br />
== Accessories ==<br />
<gallery><br />
File:Miter_Gauge_for_Ryobi_BS902.JPG|Miter Gauge<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Miter_Gauge_for_Ryobi_BS902.JPG&diff=1374File:Miter Gauge for Ryobi BS902.JPG2020-07-26T20:27:35Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=1373Category:Equipment2020-07-26T20:16:07Z<p>KevinYang: Add soldering stations</p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==Automotive==<br />
Automotive hand tools are located on the right side of the shelves under the tool wall.<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Digital Fabrication==<br />
Digital fabrication equipment is in located in the electronics room.<br />
<gallery><br />
File:Zortrax1.jpeg|[[Zortrax M200 3D Printer]]<br />
File:Kossel.jpeg|[[Kossel Delta 3D Printer]]<br />
File:RepRap_Mendel01.png|RepRap Mendel 3D Printer<br />
File:Placeholder.jpg|Monoprice Maker Select 3D Printer V2 (IIIP)<br />
</gallery><br />
<br />
==Electronics==<br />
Electronics tools are located in the electronics room.<br />
===Soldering===<br />
<gallery><br />
File:Metcal_Soldering_Station.jpg|Metcal Temperature Controlled Soldering Station<br />
File:CSI_Station1A_Soldering_Station.jpg|CSI Station1A 40W Adjustable Power Soldering Station<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra250ColdCutSaw.png|Dake MEP Cobra 250 Cold Cut Saw<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
</gallery><br />
<br />
==Pneumatic==<br />
Pneumatic hand tools are located in a plastic crate on the floor, under the shelves below the tool wall.<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
File:Central_Pneumatic_46309_Air_Brad_Nailer.JPG|Central Pneumatic 46309 Air Brad Nailer ([[:File:Central_Pneumatic_46309_Air_Brad_Nailer_Nameplate.JPG|Nameplate]])<br />
File:Husky_HDN10400_2-in-1_Nailer_Stapler.JPG|Husky HDN10400 2-in-1 Nailer/Stapler ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG|Nameplate]]) ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG|Specs]])<br />
File:Central_Pneumatic_68029_Air_Stapler.JPG|Central Pneumatic 68029 Air Stapler<br />
File:Central_Pneumatic_Air_Die_Grinder.JPG|Central Pneumatic Air Die Grinder<br />
File:Central_Penumatic_Air_Cutter.JPG|Central Pneumatic Air Cutter<br />
File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG|Central Pnenumatic Adjustable Detail Spray Gun<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
Powered hand tools are generally located on and around the tool wall, including the shelves under the tables.<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Ryobi P500 Cordless 5-1/2" Circular Saw with Laser<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Ryobi Cordless Jig Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Ryobi_BS902_Band_Saw.JPG|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Central_Machinery_Belt_Disc_Sander.JPG|Central Machinery 4"x36" Belt/6" Disc Sander<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set ([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
File:Quantrex_Ultrasonic_Cleaner.JPG|Quantrex Ultrasonic Cleaner<br />
File:Greenworks_1700_Electric_Pressure_Washer.JPG|Greenworks 1700 psi 1.4 GPM Electric Pressure Washer<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:CSI_Station1A_Soldering_Station.jpg&diff=1372File:CSI Station1A Soldering Station.jpg2020-07-26T20:13:07Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Metcal_Soldering_Station.jpg&diff=1371File:Metcal Soldering Station.jpg2020-07-26T20:13:01Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=1370Category:Equipment2020-07-26T20:05:46Z<p>KevinYang: </p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==Automotive==<br />
Automotive hand tools are located on the right side of the shelves under the tool wall.<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Digital Fabrication==<br />
Digital fabrication equipment is in located in the electronics room.<br />
<gallery><br />
File:Zortrax1.jpeg|[[Zortrax M200 3D Printer]]<br />
File:Kossel.jpeg|[[Kossel Delta 3D Printer]]<br />
File:RepRap_Mendel01.png|RepRap Mendel 3D Printer<br />
File:Placeholder.jpg|Monoprice Maker Select 3D Printer V2 (IIIP)<br />
</gallery><br />
<br />
==Electronics==<br />
Electronics tools are located in the electronics room.<br />
===Soldering===<br />
<gallery><br />
File:TwoSolderingStations.png|2 soldering stations<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra250ColdCutSaw.png|Dake MEP Cobra 250 Cold Cut Saw<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
</gallery><br />
<br />
==Pneumatic==<br />
Pneumatic hand tools are located in a plastic crate on the floor, under the shelves below the tool wall.<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
File:Central_Pneumatic_46309_Air_Brad_Nailer.JPG|Central Pneumatic 46309 Air Brad Nailer ([[:File:Central_Pneumatic_46309_Air_Brad_Nailer_Nameplate.JPG|Nameplate]])<br />
File:Husky_HDN10400_2-in-1_Nailer_Stapler.JPG|Husky HDN10400 2-in-1 Nailer/Stapler ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG|Nameplate]]) ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG|Specs]])<br />
File:Central_Pneumatic_68029_Air_Stapler.JPG|Central Pneumatic 68029 Air Stapler<br />
File:Central_Pneumatic_Air_Die_Grinder.JPG|Central Pneumatic Air Die Grinder<br />
File:Central_Penumatic_Air_Cutter.JPG|Central Pneumatic Air Cutter<br />
File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG|Central Pnenumatic Adjustable Detail Spray Gun<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
Powered hand tools are generally located on and around the tool wall, including the shelves under the tables.<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Ryobi P500 Cordless 5-1/2" Circular Saw with Laser<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Ryobi Cordless Jig Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Ryobi_BS902_Band_Saw.JPG|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Central_Machinery_Belt_Disc_Sander.JPG|Central Machinery 4"x36" Belt/6" Disc Sander<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set ([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
File:Quantrex_Ultrasonic_Cleaner.JPG|Quantrex Ultrasonic Cleaner<br />
File:Greenworks_1700_Electric_Pressure_Washer.JPG|Greenworks 1700 psi 1.4 GPM Electric Pressure Washer<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=1369Category:Equipment2020-07-26T19:59:10Z<p>KevinYang: Add belt sander pic</p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==Automotive==<br />
Automotive hand tools are located on the right side of the shelves under the tool wall.<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Digital Fabrication==<br />
Digital fabrication equipment is in located in the electronics room.<br />
<gallery><br />
File:Zortrax1.jpeg|[[Zortrax M200 3D Printer]]<br />
File:Kossel.jpeg|[[Kossel Delta 3D Printer]]<br />
File:RepRap_Mendel01.png|RepRap Mendel 3D Printer<br />
File:Placeholder.jpg|Monoprice Maker Select 3D Printer V2 (IIIP)<br />
</gallery><br />
<br />
==Electronics==<br />
Electronics tools are located in the electronics room.<br />
===Soldering===<br />
<gallery><br />
File:TwoSolderingStations.png|2 soldering stations<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra250ColdCutSaw.png|Dake MEP Cobra 250 Cold Cut Saw<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
</gallery><br />
<br />
==Pneumatic==<br />
Pneumatic hand tools are located in a plastic crate on the floor, under the shelves below the tool wall.<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
File:Central_Pneumatic_46309_Air_Brad_Nailer.JPG|Central Pneumatic 46309 Air Brad Nailer ([[:File:Central_Pneumatic_46309_Air_Brad_Nailer_Nameplate.JPG|Nameplate]])<br />
File:Husky_HDN10400_2-in-1_Nailer_Stapler.JPG|Husky HDN10400 2-in-1 Nailer/Stapler ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG|Nameplate]]) ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG|Specs]])<br />
File:Central_Pneumatic_68029_Air_Stapler.JPG|Central Pneumatic 68029 Air Stapler<br />
File:Central_Pneumatic_Air_Die_Grinder.JPG|Central Pneumatic Air Die Grinder<br />
File:Central_Penumatic_Air_Cutter.JPG|Central Pneumatic Air Cutter<br />
File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG|Central Pnenumatic Adjustable Detail Spray Gun<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
Powered hand tools are generally located on and around the tool wall, including the shelves under the tables.<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Circular Hand Saw<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Reciprocating Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Ryobi_BS902_Band_Saw.JPG|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Central_Machinery_Belt_Disc_Sander.JPG|Central Machinery 4"x36" Belt/6" Disc Sander<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set ([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
File:Quantrex_Ultrasonic_Cleaner.JPG|Quantrex Ultrasonic Cleaner<br />
File:Greenworks_1700_Electric_Pressure_Washer.JPG|Greenworks 1700 psi 1.4 GPM Electric Pressure Washer<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=1368Category:Equipment2020-07-26T19:58:21Z<p>KevinYang: </p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==Automotive==<br />
Automotive hand tools are located on the right side of the shelves under the tool wall.<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Digital Fabrication==<br />
Digital fabrication equipment is in located in the electronics room.<br />
<gallery><br />
File:Zortrax1.jpeg|[[Zortrax M200 3D Printer]]<br />
File:Kossel.jpeg|[[Kossel Delta 3D Printer]]<br />
File:RepRap_Mendel01.png|RepRap Mendel 3D Printer<br />
File:Placeholder.jpg|Monoprice Maker Select 3D Printer V2 (IIIP)<br />
</gallery><br />
<br />
==Electronics==<br />
Electronics tools are located in the electronics room.<br />
===Soldering===<br />
<gallery><br />
File:TwoSolderingStations.png|2 soldering stations<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra250ColdCutSaw.png|Dake MEP Cobra 250 Cold Cut Saw<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
</gallery><br />
<br />
==Pneumatic==<br />
Pneumatic hand tools are located in a plastic crate on the floor, under the shelves below the tool wall.<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
File:Central_Pneumatic_46309_Air_Brad_Nailer.JPG|Central Pneumatic 46309 Air Brad Nailer ([[:File:Central_Pneumatic_46309_Air_Brad_Nailer_Nameplate.JPG|Nameplate]])<br />
File:Husky_HDN10400_2-in-1_Nailer_Stapler.JPG|Husky HDN10400 2-in-1 Nailer/Stapler ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG|Nameplate]]) ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG|Specs]])<br />
File:Central_Pneumatic_68029_Air_Stapler.JPG|Central Pneumatic 68029 Air Stapler<br />
File:Central_Pneumatic_Air_Die_Grinder.JPG|Central Pneumatic Air Die Grinder<br />
File:Central_Penumatic_Air_Cutter.JPG|Central Pneumatic Air Cutter<br />
File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG|Central Pnenumatic Adjustable Detail Spray Gun<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
Powered hand tools are generally located on and around the tool wall, including the shelves under the tables.<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Circular Hand Saw<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Reciprocating Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Ryobi_BS902_Band_Saw.JPG|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Placeholder.jpg|Central Machinery 4"x36" Belt/6" Disc Sander<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set ([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
File:Quantrex_Ultrasonic_Cleaner.JPG|Quantrex Ultrasonic Cleaner<br />
File:Greenworks_1700_Electric_Pressure_Washer.JPG|Greenworks 1700 psi 1.4 GPM Electric Pressure Washer<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Ryobi_BS902_Band_Saw.JPG&diff=1367File:Ryobi BS902 Band Saw.JPG2020-07-26T19:57:13Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Central_Machinery_Belt_Disc_Sander.JPG&diff=1366File:Central Machinery Belt Disc Sander.JPG2020-07-26T19:57:04Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=1365Category:Equipment2020-07-26T19:52:14Z<p>KevinYang: Add tool locations.</p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==Automotive==<br />
Automotive hand tools are located on the right side of the shelves under the tool wall.<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Digital Fabrication==<br />
Digital fabrication equipment is in located in the electronics room.<br />
<gallery><br />
File:Zortrax1.jpeg|[[Zortrax M200 3D Printer]]<br />
File:Kossel.jpeg|[[Kossel Delta 3D Printer]]<br />
File:RepRap_Mendel01.png|RepRap Mendel 3D Printer<br />
File:Placeholder.jpg|Monoprice Maker Select 3D Printer V2 (IIIP)<br />
</gallery><br />
<br />
==Electronics==<br />
Electronics tools are located in the electronics room.<br />
===Soldering===<br />
<gallery><br />
File:TwoSolderingStations.png|2 soldering stations<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra250ColdCutSaw.png|Dake MEP Cobra 250 Cold Cut Saw<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
</gallery><br />
<br />
==Pneumatic==<br />
Pneumatic hand tools are located in a plastic crate on the floor, under the shelves below the tool wall.<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
File:Central_Pneumatic_46309_Air_Brad_Nailer.JPG|Central Pneumatic 46309 Air Brad Nailer ([[:File:Central_Pneumatic_46309_Air_Brad_Nailer_Nameplate.JPG|Nameplate]])<br />
File:Husky_HDN10400_2-in-1_Nailer_Stapler.JPG|Husky HDN10400 2-in-1 Nailer/Stapler ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG|Nameplate]]) ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG|Specs]])<br />
File:Central_Pneumatic_68029_Air_Stapler.JPG|Central Pneumatic 68029 Air Stapler<br />
File:Central_Pneumatic_Air_Die_Grinder.JPG|Central Pneumatic Air Die Grinder<br />
File:Central_Penumatic_Air_Cutter.JPG|Central Pneumatic Air Cutter<br />
File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG|Central Pnenumatic Adjustable Detail Spray Gun<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
Powered hand tools are generally located on and around the tool wall, including the shelves under the tables.<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Circular Hand Saw<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Reciprocating Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Placeholder.jpg|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Placeholder.jpg|Central Machinery 4"x36" Belt/6" Disc Sander<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set ([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
File:Quantrex_Ultrasonic_Cleaner.JPG|Quantrex Ultrasonic Cleaner<br />
File:Greenworks_1700_Electric_Pressure_Washer.JPG|Greenworks 1700 psi 1.4 GPM Electric Pressure Washer<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Materials&diff=1364Materials2020-07-26T19:47:43Z<p>KevinYang: Add chemicals cabinet</p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==On Hand==<br />
<br />
*Scrap Wood<br />
*Scrap Metal<br />
*Scrap Acrylic<br />
*Wire and Cable<br />
*Power Supplies<br />
*Communication Cables<br />
*Motors<br />
*Fans<br />
*[https://docs.google.com/spreadsheet/ccc?key=0AnB3TMaBxQApdG1qb3VSM04wQ21SZFhWMkZ2YmZTSVE&usp=docslist_api Electronic ICs]<br />
*[https://docs.google.com/spreadsheet/ccc?key=0Anwghdcft3RndGFMS1hreHFHREhIdmV0eEY2bkFvWVE&usp=docslist_api Electronic Passive Components]<br />
<br />
<br />
note: include pictures of supply racks<br />
<br />
<gallery><br />
File:Chemicals_Cabinet_July_2020.JPG|Flammable Chemicals Cabinet (Interior)<br />
File:Chemicals_Cabinet_July_2020_Closed.JPG||Flammable Chemicals Cabinet (Exterior)<br />
</gallery><br />
<br />
==Nearby Shops==<br />
<br />
Hardware:<br />
bolts and stuff - http://www.maintenanceshack.com/<br />
<br />
Food:<br />
taco nazo</div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=1363Category:Equipment2020-07-26T19:45:31Z<p>KevinYang: Add ultrasonic cleaner and power washer pics. Remove duplicate husky nail gun.</p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==Automotive==<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Digital Fabrication==<br />
<gallery><br />
File:Zortrax1.jpeg|[[Zortrax M200 3D Printer]]<br />
File:Kossel.jpeg|[[Kossel Delta 3D Printer]]<br />
File:RepRap_Mendel01.png|RepRap Mendel 3D Printer<br />
File:Placeholder.jpg|Monoprice Maker Select 3D Printer V2 (IIIP)<br />
</gallery><br />
<br />
==Electronics==<br />
<br />
===Soldering===<br />
<gallery><br />
File:TwoSolderingStations.png|2 soldering stations<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra250ColdCutSaw.png|Dake MEP Cobra 250 Cold Cut Saw<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
</gallery><br />
<br />
==Pneumatic==<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
File:Central_Pneumatic_46309_Air_Brad_Nailer.JPG|Central Pneumatic 46309 Air Brad Nailer ([[:File:Central_Pneumatic_46309_Air_Brad_Nailer_Nameplate.JPG|Nameplate]])<br />
File:Husky_HDN10400_2-in-1_Nailer_Stapler.JPG|Husky HDN10400 2-in-1 Nailer/Stapler ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG|Nameplate]]) ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG|Specs]])<br />
File:Central_Pneumatic_68029_Air_Stapler.JPG|Central Pneumatic 68029 Air Stapler<br />
File:Central_Pneumatic_Air_Die_Grinder.JPG|Central Pneumatic Air Die Grinder<br />
File:Central_Penumatic_Air_Cutter.JPG|Central Pneumatic Air Cutter<br />
File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG|Central Pnenumatic Adjustable Detail Spray Gun<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Circular Hand Saw<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Reciprocating Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Placeholder.jpg|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Placeholder.jpg|Central Machinery 4"x36" Belt/6" Disc Sander<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set ([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
File:Quantrex_Ultrasonic_Cleaner.JPG|Quantrex Ultrasonic Cleaner<br />
File:Greenworks_1700_Electric_Pressure_Washer.JPG|Greenworks 1700 psi 1.4 GPM Electric Pressure Washer<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Greenworks_1700_Electric_Pressure_Washer.JPG&diff=1362File:Greenworks 1700 Electric Pressure Washer.JPG2020-07-26T19:44:03Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Chemicals_Cabinet_July_2020.JPG&diff=1361File:Chemicals Cabinet July 2020.JPG2020-07-26T19:43:57Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Chemicals_Cabinet_July_2020_Closed.JPG&diff=1360File:Chemicals Cabinet July 2020 Closed.JPG2020-07-26T19:43:51Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Quantrex_Ultrasonic_Cleaner.JPG&diff=1359File:Quantrex Ultrasonic Cleaner.JPG2020-07-26T19:43:25Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=1351Category:Equipment2020-07-26T06:35:38Z<p>KevinYang: Add misc tools</p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==Automotive==<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Digital Fabrication==<br />
<gallery><br />
File:Zortrax1.jpeg|[[Zortrax M200 3D Printer]]<br />
File:Kossel.jpeg|[[Kossel Delta 3D Printer]]<br />
File:RepRap_Mendel01.png|RepRap Mendel 3D Printer<br />
File:Placeholder.jpg|Monoprice Maker Select 3D Printer V2 (IIIP)<br />
</gallery><br />
<br />
==Electronics==<br />
<br />
===Soldering===<br />
<gallery><br />
File:TwoSolderingStations.png|2 soldering stations<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra250ColdCutSaw.png|Dake MEP Cobra 250 Cold Cut Saw<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
</gallery><br />
<br />
==Pneumatic==<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
File:Central_Pneumatic_46309_Air_Brad_Nailer.JPG|Central Pneumatic 46309 Air Brad Nailer ([[:File:Central_Pneumatic_46309_Air_Brad_Nailer_Nameplate.JPG|Nameplate]])<br />
File:Husky_HDN10400_2-in-1_Nailer_Stapler.JPG|Husky HDN10400 2-in-1 Nailer/Stapler ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG|Nameplate]]) ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG|Specs]])<br />
File:Central_Pneumatic_68029_Air_Stapler.JPG|Central Pneumatic 68029 Air Stapler<br />
File:Central_Pneumatic_Air_Die_Grinder.JPG|Central Pneumatic Air Die Grinder<br />
File:Central_Penumatic_Air_Cutter.JPG|Central Pneumatic Air Cutter<br />
File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG|Central Pnenumatic Adjustable Detail Spray Gun<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Circular Hand Saw<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Reciprocating Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:HuskyNailGun.png|Husky Nail Gun<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Placeholder.jpg|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Placeholder.jpg|Central Machinery 4"x36" Belt/6" Disc Sander<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set ([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
File:Placeholder.jpg|Quantrex Ultrasonic Cleaner<br />
File:Placeholder.jpg|Greenworks 1700 psi 1.4 GPM Electric Pressure Washer<br />
File:Placeholder.jpg|Flammable Chemicals Cabinet<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=1350Category:Equipment2020-07-26T06:33:12Z<p>KevinYang: Add pneumatic tools.</p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==Automotive==<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Digital Fabrication==<br />
<gallery><br />
File:Zortrax1.jpeg|[[Zortrax M200 3D Printer]]<br />
File:Kossel.jpeg|[[Kossel Delta 3D Printer]]<br />
File:RepRap_Mendel01.png|RepRap Mendel 3D Printer<br />
File:Placeholder.jpg|Monoprice Maker Select 3D Printer V2 (IIIP)<br />
</gallery><br />
<br />
==Electronics==<br />
<br />
===Soldering===<br />
<gallery><br />
File:TwoSolderingStations.png|2 soldering stations<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra250ColdCutSaw.png|Dake MEP Cobra 250 Cold Cut Saw<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
</gallery><br />
<br />
==Pneumatic==<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
File:Central_Pneumatic_46309_Air_Brad_Nailer.JPG|Central Pneumatic 46309 Air Brad Nailer ([[:File:Central_Pneumatic_46309_Air_Brad_Nailer_Nameplate.JPG|Nameplate]])<br />
File:Husky_HDN10400_2-in-1_Nailer_Stapler.JPG|Husky HDN10400 2-in-1 Nailer/Stapler ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG|Nameplate]]) ([[:File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG|Specs]])<br />
File:Central_Pneumatic_68029_Air_Stapler.JPG|Central Pneumatic 68029 Air Stapler<br />
File:Central_Pneumatic_Air_Die_Grinder.JPG|Central Pneumatic Air Die Grinder<br />
File:Central_Penumatic_Air_Cutter.JPG|Central Pneumatic Air Cutter<br />
File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG|Central Pnenumatic Adjustable Detail Spray Gun<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Circular Hand Saw<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Reciprocating Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:HuskyNailGun.png|Husky Nail Gun<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Placeholder.jpg|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Placeholder.jpg|Central Machinery 4"x36" Belt/6" Disc Sander<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set ([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=1349Category:Equipment2020-07-26T06:26:48Z<p>KevinYang: Add step drill bits.</p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==Automotive==<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Digital Fabrication==<br />
<gallery><br />
File:Zortrax1.jpeg|[[Zortrax M200 3D Printer]]<br />
File:Kossel.jpeg|[[Kossel Delta 3D Printer]]<br />
File:RepRap_Mendel01.png|RepRap Mendel 3D Printer<br />
File:Placeholder.jpg|Monoprice Maker Select 3D Printer V2 (IIIP)<br />
</gallery><br />
<br />
==Electronics==<br />
<br />
===Soldering===<br />
<gallery><br />
File:TwoSolderingStations.png|2 soldering stations<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra250ColdCutSaw.png|Dake MEP Cobra 250 Cold Cut Saw<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
</gallery><br />
<br />
==Pneumatic==<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Circular Hand Saw<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Reciprocating Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:HuskyNailGun.png|Husky Nail Gun<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Placeholder.jpg|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Placeholder.jpg|Central Machinery 4"x36" Belt/6" Disc Sander<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
File:Step_Drill_Bits.JPG|Step Drill Bit Set([[:File:Step_Drill_Bits_Box.JPG|Case]])<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=Category:Equipment&diff=1348Category:Equipment2020-07-26T06:24:07Z<p>KevinYang: Added some automotive tools.</p>
<hr />
<div>Return to Main Page [[Main Page]]<br />
<br />
==Automotive==<br />
<gallery><br />
File:Pitman_Tie_Rod_Puller.JPG|Pitman Tie Rod Puller<br />
File:Pittsburgh_3_Jaw_Puller_Set.JPG|Pittsburgh 3 Jaw Puller Set<br />
File:Brake_Bleed_Set.JPG|Brake Bleed Set<br />
File:Compression_Gauge_Set.JPG|Compression Gauge Set ([[:File:Compression_Gaige_Set_Box.JPG|Case]])<br />
File:Oil_Filter_Wrenches.JPG|Oil Filter Wrenches<br />
File:Misc_Automotive_Pullers.JPG|Misc. Pullers<br />
File:Krikit_II_V_Belt_Tension_Gauge.JPG|Krikit II V Belt Tension Gauge (on loan from Trent)<br />
</gallery><br />
<br />
==Digital Fabrication==<br />
<gallery><br />
File:Zortrax1.jpeg|[[Zortrax M200 3D Printer]]<br />
File:Kossel.jpeg|[[Kossel Delta 3D Printer]]<br />
File:RepRap_Mendel01.png|RepRap Mendel 3D Printer<br />
File:Placeholder.jpg|Monoprice Maker Select 3D Printer V2 (IIIP)<br />
</gallery><br />
<br />
==Electronics==<br />
<br />
===Soldering===<br />
<gallery><br />
File:TwoSolderingStations.png|2 soldering stations<br />
File:PACE-MBT100-Station.jpeg|[[PACE MBT-100 Desoldering Station]]<br />
File:Placeholder.jpg|[[AOYUE 852A++ Hot Air Rework Station]]<br />
</gallery><br />
<br />
===Test Equipment===<br />
<gallery><br />
File:Hitachi V-212 20MHz OscilloscopeSC.png|Hitachi V-212 20MHz Oscilloscope<br />
File:MAG_HP 1631D Logic AnalyzerCS.png|HP 1631D Logic Analyzer<br />
File:Harrison 6205B Dual DC Power SupplyCS.png|Harrison 6205B Dual DC Power Supply<br />
</gallery><br />
<br />
===Other===<br />
<gallery><br />
File:HAL02S.JPG|[[HAL]] 'Raspberry Pi' (used to monitor doors and motion sensors)<br />
File:Placeholder.jpg|Nintendo Switch<br />
</gallery><br />
<br />
==Metalworking==<br />
<gallery><br />
File:MAG_DrillPressCS.jpg|King Bench Drilling Machine KSD-240M<br />
File:MAG_MillCS.jpg|Millrite MV-1 Vertical Mill<br />
File:Placeholder.jpg|Select Model No. 1023.B Lathe <br />
File:DakeMEPCobra250ColdCutSaw.png|Dake MEP Cobra 250 Cold Cut Saw<br />
File:ChicagoEle90AFluxWireWelder.png|Chicago Electric 90A flux wire welder<br />
File:OxyAcetyleneTorchTanks.png|Oxygen/Acetylene Torch and tanks<br />
File:BenchtopGrinder.png|Benchtop Grinding Wheel<br />
File:Placeholder.jpg|2-Ton Arbor Press<br />
</gallery><br />
<br />
==Pneumatic==<br />
<gallery><br />
File:Placeholder.jpg|Husky 5 gal air compressor<br />
</gallery><br />
<br />
==Powered Hand Tools==<br />
<gallery><br />
File:Placeholder.jpg|Drills and Impact Drivers<br />
File:CordlessSkillSaw.png|Circular Hand Saw<br />
File:HandWheelGrinder.png|Angle Grinder<br />
File:RecipricatingSaw.png|Reciprocating Saw<br />
File:Placeholder.jpg|Black and Decker Jig Saw<br />
File:HuskyNailGun.png|Husky Nail Gun<br />
File:Placeholder.jpg|Various Dremels and Rotary Tools<br />
</gallery><br />
<br />
==Woodworking==<br />
<gallery><br />
File:Delta6InchMiterSaw.png|Delta 6" Miter Saw<br />
File:Placeholder.jpg|[[Ryobi 9" Band Saw BS902]]<br />
File:Placeholder.jpg|Dewalt Miter Saw<br />
File:Placeholder.jpg|Scroll Saw<br />
File:Placeholder.jpg|Craftsman 10" Table Saw 113.29901<br />
File:Placeholder.jpg|Central Machinery 4"x36" Belt/6" Disc Sander<br />
</gallery><br />
<br />
==Other==<br />
<gallery><br />
File:Tool_Wall_July_2020.JPG|Tool Wall<br />
<!-- File:InjectionMolder.png|Newbury Industries Eldorado Injection Molder V1-30M --><br />
<!-- File:MAG_AirCompresserCS.JPG|Mill Bros & Co Air Compressor --><br />
File:Vacuum Bag with Pump.png|Vacuum Bag with Pump, used with laminates and composites<br />
File:Mantis_Right.JPG|[[Mantis Stereo Microscope]]<br />
</gallery></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Central_Penumatic_Air_Cutter.JPG&diff=1347File:Central Penumatic Air Cutter.JPG2020-07-26T06:13:33Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Central_Pneumatic_Adjustable_Detail_Spray_Gun.JPG&diff=1346File:Central Pneumatic Adjustable Detail Spray Gun.JPG2020-07-26T06:13:24Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Central_Pneumatic_Air_Die_Grinder.JPG&diff=1345File:Central Pneumatic Air Die Grinder.JPG2020-07-26T06:13:14Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Central_Pneumatic_68029_Air_Stapler.JPG&diff=1344File:Central Pneumatic 68029 Air Stapler.JPG2020-07-26T06:13:06Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Husky_HDN10400_2-in-1_Nailer_Stapler_Nameplate.JPG&diff=1343File:Husky HDN10400 2-in-1 Nailer Stapler Nameplate.JPG2020-07-26T06:12:55Z<p>KevinYang: </p>
<hr />
<div></div>KevinYanghttps://www.maglaboratory.org/w/index.php?title=File:Husky_HDN10400_2-in-1_Nailer_Stapler_Specs.JPG&diff=1342File:Husky HDN10400 2-in-1 Nailer Stapler Specs.JPG2020-07-26T06:12:46Z<p>KevinYang: </p>
<hr />
<div></div>KevinYang