User contributions for Blu
Jump to navigation
Jump to search
1 April 2024
- 19:2119:21, 1 April 2024 diff hist +18 m CNC Mill →Trace Isolation current
28 March 2024
- 07:3307:33, 28 March 2024 diff hist +60 m CNC Mill →0.6mm Slot Milling
- 07:3107:31, 28 March 2024 diff hist +482 m CNC Mill →FlatCAM Parameters
- 07:1607:16, 28 March 2024 diff hist +208 m CNC Mill →Workpiece Examples
- 04:2904:29, 28 March 2024 diff hist +87 N File:Example CNC Milling ch552 usbc RS.jpg MAG Laboratory Milled and Assembled CH552 test board with USB-C connector current
- 04:2304:23, 28 March 2024 diff hist +170 m CNC Mill →Trace Isolation: Clarified purpose of figure
17 March 2024
- 19:2219:22, 17 March 2024 diff hist +803 m Creality CR10S added printer start script current
27 February 2024
- 04:3304:33, 27 February 2024 diff hist +67 m IT Notes →The Internet of Trash and Single-Board Computers current
18 February 2024
- 19:0619:06, 18 February 2024 diff hist +1,185 m K40 Laser Cutter →Feeds & Speeds current
17 February 2024
- 18:3118:31, 17 February 2024 diff hist +500 m K40 Laser Cutter →Feeds & Speeds
- 12:1212:12, 17 February 2024 diff hist +722 m CNC Mill →Edge Milling
- 12:0012:00, 17 February 2024 diff hist +397 m CNC Mill →Trace Isolation
- 11:5911:59, 17 February 2024 diff hist +116 N File:Flatcam islands.png A screenshot showing undesired islands that form when the isolation settings are not entered correctly current
27 January 2024
- 10:1510:15, 27 January 2024 diff hist +341 m K40 Laser Cutter →Brandon's 1/8" (3.2mm) Acrylic: added alignment notes
26 January 2024
- 22:1622:16, 26 January 2024 diff hist +798 K40 Laser Cutter added settings
- 21:5921:59, 26 January 2024 diff hist +16 m K40 Laser Cutter →General Advice and Precautions: Clarified water cooling guideline
25 January 2024
- 21:0021:00, 25 January 2024 diff hist +1 m K40 Laser Cutter →Air Assist Upgrades
- 20:5920:59, 25 January 2024 diff hist +35 m K40 Laser Cutter →Air Assist Upgrades: added link to the drag chain stl
- 20:5820:58, 25 January 2024 diff hist +278 m K40 Laser Cutter →Laser Guidance
- 20:4620:46, 25 January 2024 diff hist +8 m K40 Laser Cutter →Laser Guidance: added approximate date for laser guidance install
- 20:4520:45, 25 January 2024 diff hist −32 m K40 Laser Cutter →Future Upgrades: removing laser guidance because it is now a current upgrade
- 20:4520:45, 25 January 2024 diff hist +200 m K40 Laser Cutter →History
1 January 2024
- 03:3603:36, 1 January 2024 diff hist +3,842 CNC Mill →Supplemental Resources
- 03:2103:21, 1 January 2024 diff hist +119 N File:Flatcam screenshot.png No edit summary current
31 December 2023
- 23:1723:17, 31 December 2023 diff hist +56 m CNC Mill →Supplemental Resources
28 December 2023
- 16:2616:26, 28 December 2023 diff hist −9 m Pulse XE →Start G-Code current
8 December 2023
- 20:1720:17, 8 December 2023 diff hist +303 m HAL No edit summary current
4 December 2023
- 11:2311:23, 4 December 2023 diff hist +32 m IT Notes →The Routers
- 11:2211:22, 4 December 2023 diff hist +21 m IT Notes →The Internet of Trash and Single-Board Computers
15 November 2023
- 03:5503:55, 15 November 2023 diff hist −111 m Category:Equipment equipment update
11 November 2023
- 02:0602:06, 11 November 2023 diff hist +4 m K40 Laser Cutter →Air Assist Upgrades: Clarified PLA vs aluminum air assist nozzle
25 October 2023
- 00:5400:54, 25 October 2023 diff hist 0 m User:Blu →Current Role in MAG Lab current
5 October 2023
- 06:5406:54, 5 October 2023 diff hist +254 m HAL →HAL Enclosure
- 06:5306:53, 5 October 2023 diff hist +299 m HAL Added maintenance notes about the board inside HAL
1 October 2023
- 08:5408:54, 1 October 2023 diff hist +231 m CNC Mill added model number and added some fusion360 postprocessing notes
19 September 2023
- 12:5312:53, 19 September 2023 diff hist +689 m Pulse XE →Operators' Log
12 August 2023
- 11:3011:30, 12 August 2023 diff hist −2 m IT Notes →The Internet of Trash and Single-Board Computers
- 11:2911:29, 12 August 2023 diff hist +269 m IT Notes →The Internet of Trash and Single-Board Computers: Added more cameras
28 July 2023
- 18:5718:57, 28 July 2023 diff hist −38 m K40 Laser Cutter →Materials
- 18:5718:57, 28 July 2023 diff hist +626 m K40 Laser Cutter →Materials
- 18:4618:46, 28 July 2023 diff hist +193 m K40 Laser Cutter →Software Support: filled out section
- 18:4118:41, 28 July 2023 diff hist +167 m K40 Laser Cutter →General Advice and Precautions
- 18:3118:31, 28 July 2023 diff hist +483 m K40 Laser Cutter →Getting Started: filled in section
- 17:5417:54, 28 July 2023 diff hist +8 m K40 Laser Cutter added cutting size.
30 May 2023
- 10:0810:08, 30 May 2023 diff hist −50 MAGLab:About No edit summary current
13 May 2023
- 03:4903:49, 13 May 2023 diff hist +34 m IT Notes →The Internet of Trash and Single-Board Computers
12 May 2023
- 10:0210:02, 12 May 2023 diff hist +288 m Pulse XE →Operators' Log
- 09:5009:50, 12 May 2023 diff hist +842 m Pulse XE →Operators' Log: Added changed settings
- 09:4009:40, 12 May 2023 diff hist −51 m Category:3D Printing →3D Printers current
- 09:3209:32, 12 May 2023 diff hist 0 m Zortrax M200 3D Printer No edit summary current
- 09:3209:32, 12 May 2023 diff hist 0 m QiDi X-Plus 3D Printer No edit summary current
- 09:3109:31, 12 May 2023 diff hist 0 m Pulse XE No edit summary
- 09:3109:31, 12 May 2023 diff hist 0 m Monoprice Maker Select 3D Printer V2 No edit summary current
- 09:3109:31, 12 May 2023 diff hist 0 m Creality CR10S No edit summary
- 09:3009:30, 12 May 2023 diff hist +23 m Category:3D Printing No edit summary
- 09:2809:28, 12 May 2023 diff hist +150 m Category:3D Printing →Equipment
- 09:2609:26, 12 May 2023 diff hist +319 m Category:3D Printing →Procedures
- 09:2509:25, 12 May 2023 diff hist +390 m Category:3D Printing →History
4 May 2023
- 22:5722:57, 4 May 2023 diff hist −13 m K40 Laser Cutter →Future Upgrades: Air assist already implemented.
4 April 2023
- 18:3018:30, 4 April 2023 diff hist +35 N 3D Printing Blu moved page 3D Printing to Category:3D Printing current Tag: New redirect
- 18:3018:30, 4 April 2023 diff hist 0 m Category:3D Printing Blu moved page 3D Printing to Category:3D Printing
- 07:4907:49, 4 April 2023 diff hist +36 m Creality CR10S →2023-04-01 Brandon
- 07:4307:43, 4 April 2023 diff hist +1,024 m Creality CR10S →Operators' Log: Added operator log and some settings
1 April 2023
- 19:1119:11, 1 April 2023 diff hist 0 m User:Blu →Character Description
27 March 2023
- 21:5521:55, 27 March 2023 diff hist 0 m User:Blu hip size for males is measured differently
19 March 2023
- 21:4421:44, 19 March 2023 diff hist −1 m IT Notes →Wireguard: Brandon got rid of the desktop and swapped to another laptop
13 March 2023
- 09:2509:25, 13 March 2023 diff hist +431 m Creality CR10S →Operators' Log
- 08:3608:36, 13 March 2023 diff hist +665 m Pulse XE →BLu 2022-12-25
- 07:5407:54, 13 March 2023 diff hist +229 m Category:3D Printing →Procedures
- 07:5107:51, 13 March 2023 diff hist +1,701 m Monoprice Maker Select 3D Printer V2 →Operators' Log
25 January 2023
- 19:2619:26, 25 January 2023 diff hist +414 m Category:3D Printing →Filament Dehydration
19 January 2023
- 01:4601:46, 19 January 2023 diff hist +424 m Zortrax M200 3D Printer →Operators' Log
18 January 2023
- 11:2211:22, 18 January 2023 diff hist +133 N File:Zortrax CalibrationBOA.jpg https://www.thingiverse.com/thing:287033 Printed by the Zortrax in ABS. Left cube is at 250C, right cube is at 240C. current
- 10:1110:11, 18 January 2023 diff hist +470 m Zortrax M200 3D Printer →Operators' Log
- 10:0810:08, 18 January 2023 diff hist +686 m Monoprice Maker Select 3D Printer V2 →Operators' Log
- 09:5209:52, 18 January 2023 diff hist +188 m Creality CR10S →Operators' Log
15 January 2023
- 01:2601:26, 15 January 2023 diff hist +69 m IT Notes →The Routers
13 January 2023
- 11:0311:03, 13 January 2023 diff hist +2 m Bicycle Stuff No edit summary current
- 11:0311:03, 13 January 2023 diff hist +22 m Bicycle Stuff No edit summary
- 11:0211:02, 13 January 2023 diff hist +2,132 N Bicycle Stuff Added new page with bicycle stuff found in the bicycle box
6 January 2023
- 20:1420:14, 6 January 2023 diff hist +75 m Creality CR10S →Operators' Log
- 07:2207:22, 6 January 2023 diff hist +59 m Monoprice Maker Select 3D Printer V2 →Introductory Information
- 06:5406:54, 6 January 2023 diff hist +104 Monoprice Maker Select 3D Printer V2 →Start G-Code
- 06:5206:52, 6 January 2023 diff hist +132 m Monoprice Maker Select 3D Printer V2 →Brandon 2023-01-05
- 03:5703:57, 6 January 2023 diff hist +160 m Monoprice Maker Select 3D Printer V2 →Printer Settings
- 03:5603:56, 6 January 2023 diff hist +348 m Monoprice Maker Select 3D Printer V2 →Printer Settings
- 03:4603:46, 6 January 2023 diff hist +1,138 Pulse XE Added startup gcode
- 03:3803:38, 6 January 2023 diff hist −12 m Pulse XE →History and Operator Notes
- 03:3703:37, 6 January 2023 diff hist +5 m Monoprice Maker Select 3D Printer V2 →Behind the Name: Clarified that the monoprice logo actually spells "MP"
- 03:3303:33, 6 January 2023 diff hist +1,217 Monoprice Maker Select 3D Printer V2 Added printer settings, specifically the gcode.
- 03:1803:18, 6 January 2023 diff hist +122 m Monoprice Maker Select 3D Printer V2 →Operators' Log
- 03:1403:14, 6 January 2023 diff hist +392 Monoprice Maker Select 3D Printer V2 →Components
31 December 2022
- 10:2610:26, 31 December 2022 diff hist +45 m Template:3D DigitalFabrication Added Pulse XE 3D Printer current
- 10:2410:24, 31 December 2022 diff hist +194 m Pulse XE No edit summary
- 10:1810:18, 31 December 2022 diff hist +70 N File:Pulse XE.jpg Pulse XE printer in its enclosure. Taken on 2022-12-31. current
- 10:1710:17, 31 December 2022 diff hist −49 m Pulse XE No edit summary
- 10:1610:16, 31 December 2022 diff hist +441 m Zortrax M200 3D Printer →Brandon 2022-12-31
- 10:1010:10, 31 December 2022 diff hist +92 N File:M200 2022-12-31.jpg chatlowpoly printed on the Zortrax M200 on 2022-12-31 as a qualification print current
- 10:0910:09, 31 December 2022 diff hist +258 Zortrax M200 3D Printer Added operator notes from printer re-operational status on 2022-12-31.
30 December 2022
- 07:2607:26, 30 December 2022 diff hist −6 m Pulse XE No edit summary
- 07:2507:25, 30 December 2022 diff hist +211 m Pulse XE →History and Operator Notes
- 07:2107:21, 30 December 2022 diff hist +116 m Category:3D Printing →Filament Dehydration
29 December 2022
- 02:5402:54, 29 December 2022 diff hist +57 m IT Notes →The Internet of Trash and Single-Board Computers
22 December 2022
- 21:4621:46, 22 December 2022 diff hist +51 m User:Blu →Character Description
- 21:2921:29, 22 December 2022 diff hist +986 m User:Blu No edit summary
18 December 2022
- 15:5115:51, 18 December 2022 diff hist +1,487 Monoprice Maker Select 3D Printer V2 Added first operators' log.
- 15:3915:39, 18 December 2022 diff hist +125 m Creality CR10S No edit summary
16 December 2022
- 00:1600:16, 16 December 2022 diff hist +45 m Creality CR10S →2022-12-14 Brandon
15 December 2022
- 07:3207:32, 15 December 2022 diff hist −46 m Creality CR10S →2022-12-14 Brandon
- 04:5604:56, 15 December 2022 diff hist +646 m Creality CR10S →Operator's Log: Added fan replacement notes
14 December 2022
- 09:0009:00, 14 December 2022 diff hist +545 m Zortrax M200 3D Printer →Fume Filtering
- 08:5408:54, 14 December 2022 diff hist +373 m Zortrax M200 3D Printer →Filament Usage: added PLA information
- 08:5108:51, 14 December 2022 diff hist +3,214 Zortrax M200 3D Printer reorganized page again, added filament information, added another operator note with the problems encountered during fan replacement
- 08:1408:14, 14 December 2022 diff hist +52 N File:M200 Fan2 Fan3.jpg No edit summary current
13 December 2022
- 02:5102:51, 13 December 2022 diff hist +2,106 Zortrax M200 3D Printer Added operator's log. Re-jiggered page organization. Added additional information about only Fans. Added information about thermal issues. Placed printer into maintenance.
12 December 2022
- 03:1303:13, 12 December 2022 diff hist +67 m IT Notes →The Internet of Trash and Single-Board Computers: added pulseXE
9 December 2022
- 23:0423:04, 9 December 2022 diff hist +126 m Creality CR10S →Firmware
- 23:0223:02, 9 December 2022 diff hist +1,224 Creality CR10S Added firmware, added controller board information.
7 December 2022
- 03:0303:03, 7 December 2022 diff hist +431 m Creality CR10S →Operator's Log
4 December 2022
- 23:1723:17, 4 December 2022 diff hist +887 m IT Notes →MAG Laboratory IT Services: Added minecraft information
2 December 2022
- 20:3720:37, 2 December 2022 diff hist +389 m Creality CR10S →Operator's Log
1 December 2022
- 23:3423:34, 1 December 2022 diff hist +40 m IT Notes →Wireguard: added brandon desktop
28 November 2022
- 05:1805:18, 28 November 2022 diff hist +198 m Getting to MagLab →By Train current
- 05:1505:15, 28 November 2022 diff hist +839 m Getting to MagLab revised wording. added additional context to bicycling, walking, transit.
15 October 2022
- 03:5003:50, 15 October 2022 diff hist +12 m IT Notes →Wireguard
10 October 2022
- 06:4106:41, 10 October 2022 diff hist +16 m IT Notes →Wireguard
23 September 2022
- 10:2910:29, 23 September 2022 diff hist +6,588 N Pulse XE New page about the Pulse XE 3D Printer.
- 09:2909:29, 23 September 2022 diff hist +79 N File:PulseXE First ChatLowPoly.jpg The first cat out of the Pulse XE. Layer adhesion issues galore. current
- 09:1009:10, 23 September 2022 diff hist 0 m Category:3D Printing →Equipment: Changed the M200 link to the first reference of the printer.
- 09:0909:09, 23 September 2022 diff hist +216 m Category:3D Printing →Equipment: Added the Pulse XE
19 September 2022
- 12:5212:52, 19 September 2022 diff hist +23 m IT Notes added more information in the blurb at the beginning of the page. maybe this will let the search find this page easier?
- 12:4312:43, 19 September 2022 diff hist +4 m IT Notes →The Routers: correcting the name of the opnsense00 vm
13 September 2022
- 09:5209:52, 13 September 2022 diff hist −2 m IT Notes →Outside Cameras
- 09:5109:51, 13 September 2022 diff hist +48 m IT Notes →Wireguard
4 September 2022
- 04:3304:33, 4 September 2022 diff hist 0 File:Creality CR10.jpg Blu uploaded a new version of File:Creality CR10.jpg current
- 04:2504:25, 4 September 2022 diff hist +25 m Category:3D Printing added to activities category
- 04:2404:24, 4 September 2022 diff hist +34 N Activities Blu moved page Activities to Category:Activities: activities are a main mag laboratory wiki category now current Tag: New redirect
- 04:2404:24, 4 September 2022 diff hist 0 m Category:Activities Blu moved page Activities to Category:Activities: activities are a main mag laboratory wiki category now current
- 04:2304:23, 4 September 2022 diff hist +15 m Category:Activities added photography photo
- 04:2204:22, 4 September 2022 diff hist +89 N File:Brandon pinhole photograph.jpg Brandon's pinhole camera photograph of a weir and bridge in Snow Creek Park current
- 04:0304:03, 4 September 2022 diff hist +328 Epoxy Granite CNC Tabletop Mill closing remarks on the project current
- 03:5303:53, 4 September 2022 diff hist +36 m Category:3D Printing →History: linking to reprap
- 03:5203:52, 4 September 2022 diff hist +3,628 N Category:3D Printing Created page with "At MAG Laboratory, we maintain a collection of 3d printers assigned to different capabilities and materials. This page serves as an overview for our history, procedures, and..."
- 03:5103:51, 4 September 2022 diff hist +5 m Monoprice Maker Select 3D Printer V2 placed picture for the IIIP
- 02:5702:57, 4 September 2022 diff hist −1 m Template:3D DigitalFabrication No edit summary
- 02:5702:57, 4 September 2022 diff hist −12 m Template:3D DigitalFabrication No edit summary
- 02:5602:56, 4 September 2022 diff hist −35 m Template:3D DigitalFabrication No edit summary
- 02:3502:35, 4 September 2022 diff hist +4 m Category:Activities finally created a link for 3d printing
- 02:1402:14, 4 September 2022 diff hist +37 m Template:3D DigitalFabrication added creality image
- 02:1102:11, 4 September 2022 diff hist +2 m Creality CR10S changed creality picture
- 02:1002:10, 4 September 2022 diff hist +59 N File:Creality CR10.jpg Image of the Creality CR10S at MAG Laboratory
- 01:4401:44, 4 September 2022 diff hist +539 m Creality CR10S →Operator's Log
3 September 2022
- 13:5513:55, 3 September 2022 diff hist 0 12" Axial Ventilation Fan →Found Fan Speeds current
2 September 2022
- 21:4521:45, 2 September 2022 diff hist +282 m Creality CR10S →Operator's Log: Logging activity on 2022-09-02
28 August 2022
- 16:4616:46, 28 August 2022 diff hist +505 m Creality CR10S Operator's log added. Entries added to operator's log.
23 August 2022
- 10:1610:16, 23 August 2022 diff hist +96 m Creality CR10S →Bed
21 August 2022
- 16:2516:25, 21 August 2022 diff hist 0 m Midori edited dimensions of cat picture gallery and added another picture of midori current
- 16:2316:23, 21 August 2022 diff hist +23 m Midori added midori pictures
- 16:2116:21, 21 August 2022 diff hist 0 N File:Midori Eating.jpg No edit summary current
- 16:1416:14, 21 August 2022 diff hist −64 MAGLab:About →Extra Officers: Ben is not the vice president
- 16:0716:07, 21 August 2022 diff hist +24 m Epson Perfection V550 Photo Scanner forgot to add the equipment tag current
- 16:0616:06, 21 August 2022 diff hist +2,749 N Epson Perfection V550 Photo Scanner Created page with "{| class="wikitable" style="float:right;" !Epson Perfection V550 Photo Scanner |- |300px<br/> '''Ownership:''' Mag Laboratory <br/> '''Status:''' Fu..."
- 15:1615:16, 21 August 2022 diff hist +49 m Category:Equipment →Planar Image Handling
- 15:1515:15, 21 August 2022 diff hist +24 m Dake MEP Cobra 350 Cold Cut Saw No edit summary current
- 15:1415:14, 21 August 2022 diff hist +24 m Mantis Stereo Microscope No edit summary current
- 15:1315:13, 21 August 2022 diff hist +23 m K40 Laser Cutter added to equipment
- 15:1215:12, 21 August 2022 diff hist +33 N Equipment Blu moved page Equipment to Category:Equipment: should be a category current Tag: New redirect
- 15:1215:12, 21 August 2022 diff hist 0 m Category:Equipment Blu moved page Equipment to Category:Equipment: should be a category
3 August 2022
- 12:1912:19, 3 August 2022 diff hist −5 m IT Notes →Wireguard
- 11:5811:58, 3 August 2022 diff hist +405 m IT Notes →MAG Laboratory IT Services: Added wireguard VPN
- 11:5011:50, 3 August 2022 diff hist 0 m IT Notes →MAG Laboratory IT Services: Alphabetized
- 09:5309:53, 3 August 2022 diff hist +69 m MAGLab:About →Extra Officers
- 09:5109:51, 3 August 2022 diff hist +170 N User talk:Blu Created page with "Have you considered updating your MAG Laboratory profile with the words "Magical (cat) girl (boy)?" --~~~~" current
- 09:5009:50, 3 August 2022 diff hist +124 m MAG Cat No edit summary
- 09:4009:40, 3 August 2022 diff hist −250 Board of Directors Redirected page to MAGLab:About current Tag: New redirect
- 09:4009:40, 3 August 2022 diff hist +281 m MAGLab:About No edit summary
- 09:3709:37, 3 August 2022 diff hist +1,556 N MAGLab:About Created page with "== Bylaws == The bylaws which govern MAGLaboratory may be found at the link below. [https://drive.google.com/file/d/1uZHUAkbRsP4-Q9rlHZhcD0tWlm3aSuvZ/view?usp=sharing Bylaws..."
- 09:3509:35, 3 August 2022 diff hist +291 m Category:Policy No edit summary
- 08:5308:53, 3 August 2022 diff hist +261 m Board of Directors No edit summary
31 July 2022
- 11:3211:32, 31 July 2022 diff hist +26 m Creality CR10S No edit summary
- 11:3211:32, 31 July 2022 diff hist +456 m Creality CR10S No edit summary
- 11:2611:26, 31 July 2022 diff hist +603 N Creality CR10S Created page with "{| class="wikitable" style="float:right;" !Creality-CR10S |- | 300px<br/> '''Location:''' Electronics Room <br/> '''Ownership:''' MAG Laboratory <br/>..."
- 11:1911:19, 31 July 2022 diff hist +26 m QiDi X-Plus 3D Printer added to 3d printer category
- 11:0711:07, 31 July 2022 diff hist +153 m Monoprice Maker Select 3D Printer V2 separated sections and added namesake information
- 11:0311:03, 31 July 2022 diff hist +1,368 Zortrax M200 3D Printer Added zortrax information
- 10:4110:41, 31 July 2022 diff hist +2,076 N Monoprice Maker Select 3D Printer V2 added basic IIIP information
- 07:4807:48, 31 July 2022 diff hist +501 m QiDi X-Plus 3D Printer added 3d printer block
- 06:4906:49, 31 July 2022 diff hist +69 m Category:Equipment →Powered Hand Tools
- 06:3006:30, 31 July 2022 diff hist +60 m Template:3D DigitalFabrication added the creality, alphabetized
- 06:2106:21, 31 July 2022 diff hist +118 m IT Notes →The Internet of Trash and Single-Board Computers: added the IIIP
- 06:1906:19, 31 July 2022 diff hist +356 m QiDi X-Plus 3D Printer added small details about the printer
26 July 2022
- 17:0617:06, 26 July 2022 diff hist +207 m 12" Axial Ventilation Fan →Current Usage: Added UI images
- 17:0017:00, 26 July 2022 diff hist 0 N File:HAL Display Fan Advanced.png No edit summary current
- 16:5916:59, 26 July 2022 diff hist 0 N File:HAL Display Fan Simple.png No edit summary current
- 16:5716:57, 26 July 2022 diff hist +377 m 12" Axial Ventilation Fan →Current Usage: Added predetermined fan speeds.
- 14:2014:20, 26 July 2022 diff hist +272 m Category:Activities No edit summary
- 14:1314:13, 26 July 2022 diff hist +34 Category:Main Page No edit summary
- 14:0014:00, 26 July 2022 diff hist +18 m Category:Equipment →Metalworking
- 13:5913:59, 26 July 2022 diff hist +24 m CNC Mill No edit summary
- 13:5913:59, 26 July 2022 diff hist −19 m CNC Mill No edit summary
- 13:5713:57, 26 July 2022 diff hist −2 m Category:Equipment →Metalworking: Finally added CNC
- 13:5413:54, 26 July 2022 diff hist +40 N File:Martin-1.jpg Blu moved page File:Martin-1.jpg to File:Tiger-vs-Martin-1.jpg: file naming scheme not good current Tag: New redirect
- 13:5413:54, 26 July 2022 diff hist 0 m File:Tiger-vs-Martin-1.jpg Blu moved page File:Martin-1.jpg to File:Tiger-vs-Martin-1.jpg: file naming scheme not good current
- 13:5213:52, 26 July 2022 diff hist +36 N File:Chilling.jpg Blu moved page File:Chilling.jpg to File:Cats Chilling.jpg: file naming scheme not good current Tag: New redirect
- 13:5213:52, 26 July 2022 diff hist 0 m File:Cats Chilling.jpg Blu moved page File:Chilling.jpg to File:Cats Chilling.jpg: file naming scheme not good current
- 13:5113:51, 26 July 2022 diff hist +35 N File:Light.jpg Blu moved page File:Light.jpg to File:Midori Light.jpg: file naming scheme not good current Tag: New redirect
- 13:5113:51, 26 July 2022 diff hist 0 m File:Midori Light.jpg Blu moved page File:Light.jpg to File:Midori Light.jpg: file naming scheme not good current
- 13:4813:48, 26 July 2022 diff hist +40 m HAL →Photo Gallery
- 13:4613:46, 26 July 2022 diff hist +9 m Category:Equipment →Other
- 13:4413:44, 26 July 2022 diff hist +30 m Template:3D DigitalFabrication No edit summary
- 13:3813:38, 26 July 2022 diff hist +28 m Midori change gallery height
- 13:3613:36, 26 July 2022 diff hist 0 m Phoebe Blackjaw No edit summary
- 13:3313:33, 26 July 2022 diff hist +192 m Phoebe Blackjaw gallery reorganization
- 13:2713:27, 26 July 2022 diff hist +85 m MAG Cat No edit summary
- 13:2013:20, 26 July 2022 diff hist −21 Midori fixed formatting
- 13:1313:13, 26 July 2022 diff hist +78 m Category:Cats cat gallery aestheticized and linkized current
- 13:0813:08, 26 July 2022 diff hist +2 m Tiger II No edit summary current
- 13:0113:01, 26 July 2022 diff hist 0 File:HAL001.jpg Blu uploaded a new version of File:HAL001.jpg current
- 12:5812:58, 26 July 2022 diff hist −6 m HAL No edit summary
- 12:5712:57, 26 July 2022 diff hist +155 m HAL No edit summary
- 12:4012:40, 26 July 2022 diff hist +33 N Main Page Redirected page to Category:Main Page current Tag: New redirect
- 12:3512:35, 26 July 2022 diff hist +20 m Materials formatting change in "nearby shops" current
- 12:3112:31, 26 July 2022 diff hist −25 m Template:3D DigitalFabrication linking to the 3d printer category was a mistake.
- 12:2912:29, 26 July 2022 diff hist +1 m Category:Activities No edit summary
- 12:2812:28, 26 July 2022 diff hist +74 m Category:Activities blurb about not being projects.
- 12:2612:26, 26 July 2022 diff hist +36 N Talk:Projects Blu moved page Talk:Projects to Category talk:Projects current Tag: New redirect
- 12:2612:26, 26 July 2022 diff hist 0 m Category talk:Projects Blu moved page Talk:Projects to Category talk:Projects current
- 12:2612:26, 26 July 2022 diff hist +32 N Projects Blu moved page Projects to Category:Projects current Tag: New redirect
- 12:2612:26, 26 July 2022 diff hist 0 m Category:Projects Blu moved page Projects to Category:Projects current
- 12:2512:25, 26 July 2022 diff hist +172 m Category:Projects added description blurb
- 12:2412:24, 26 July 2022 diff hist +24 m Category:Notes Added to main page category current
- 12:2412:24, 26 July 2022 diff hist +8 m PCB notes added to category notes and category projects current
- 12:2312:23, 26 July 2022 diff hist +179 N Category:Policy Created page with "MAG Laboratory is built on a system of general and specific rules. == General Rules == # Don't be a dick. # Don't make us make more rules. # Safety third. Category:Main_Pa..."
- 12:2012:20, 26 July 2022 diff hist +21 m Welding Policy No edit summary current
- 12:1812:18, 26 July 2022 diff hist +24 m Category:Activities Added to main page category
- 12:1712:17, 26 July 2022 diff hist +24 m Meeting Minutes Added to main page category current
- 12:1712:17, 26 July 2022 diff hist +24 m Category:Cats Added to main page category
- 12:1312:13, 26 July 2022 diff hist +20 m IT Notes added to category notes
- 12:1212:12, 26 July 2022 diff hist +20 m Space Tour Notes added to category notes current
- 12:1212:12, 26 July 2022 diff hist +132 N Category:Notes Created page with "This page contains Wiki-documented notes from MAG Laboratory. These notes are from contributions from members like you. Thank you."
- 12:1012:10, 26 July 2022 diff hist +24 m Library Added to main page category current
- 12:0912:09, 26 July 2022 diff hist +24 m Category:Projects Added to main page category
- 12:0812:08, 26 July 2022 diff hist −11 m Materials Added to main page category
- 12:0612:06, 26 July 2022 diff hist +27 m Kossel Delta 3D Printer No edit summary current
- 12:0612:06, 26 July 2022 diff hist +211 m Template:3D DigitalFabrication No edit summary
- 11:5811:58, 26 July 2022 diff hist −11 m Category:Equipment Added to main page category
- 11:5711:57, 26 July 2022 diff hist +26 N Upcoming Competitions Blu moved page Upcoming Competitions to Competitions: Not all competitions are upcoming current Tag: New redirect
- 11:5711:57, 26 July 2022 diff hist 0 m Competitions Blu moved page Upcoming Competitions to Competitions: Not all competitions are upcoming current
- 11:5611:56, 26 July 2022 diff hist −11 m Events Added to main page category current
- 11:5411:54, 26 July 2022 diff hist +488 m Competitions formatted contests into table
- 11:3811:38, 26 July 2022 diff hist −83 m Membership Removed dead paypal links. Also added to main page. current
- 11:3611:36, 26 July 2022 diff hist +18 N MediaWiki:Mainpage Created page with "Category:Main_Page" current
- 11:3411:34, 26 July 2022 diff hist +728 N Category:Main Page Main Page should be a category instead of its own page. This way, categorized pages can be listed on the main page.
- 11:2911:29, 26 July 2022 diff hist +75 m 12" Axial Ventilation Fan →Picture Gallery: Added later pictures
- 11:2611:26, 26 July 2022 diff hist +53 N File:VFD Nameplate.jpg This is a picture of the VFD nameplate. current
- 11:2311:23, 26 July 2022 diff hist +122 N File:AFF Baldor 3ph.jpg This is a picture of the three-phase axial flow fan motor which allows us to use variable frequency control. current
- 11:2111:21, 26 July 2022 diff hist +93 N File:Old Hal Board.jpg This is the old HAL board which was swapped out for a new board with protection current
25 July 2022
- 01:4101:41, 25 July 2022 diff hist −48 m HAL →History: Apparently, temperature sensor network restarts were implemented in 2021
- 01:4001:40, 25 July 2022 diff hist +193 m HAL →2021: Added details about the LT3960
- 00:5700:57, 25 July 2022 diff hist +108 m HAL →2022
- 00:5400:54, 25 July 2022 diff hist +345 m HAL Updated with more diagrams and 2022 history so far
- 00:1500:15, 25 July 2022 diff hist +17 N File:HAL001.jpg No edit summary
- 00:0300:03, 25 July 2022 diff hist −114 m 12" Axial Ventilation Fan →Future Usage
- 00:0200:02, 25 July 2022 diff hist −93 m 12" Axial Ventilation Fan →Current Usage: Including VFD control on the HAL display
27 June 2022
- 10:2610:26, 27 June 2022 diff hist +536 m IT Notes Added more notes
20 June 2022
- 06:5006:50, 20 June 2022 diff hist +98 m IT Notes →Containers: added VPN
19 June 2022
- 02:2202:22, 19 June 2022 diff hist +130 m IT Notes →MAG Laboratory IT Services: Added Google Drive link
- 01:2701:27, 19 June 2022 diff hist +457 m IT Notes →MAG Laboratory IT Services
- 01:0501:05, 19 June 2022 diff hist +94 IT Notes →Containers
11 June 2022
- 03:0503:05, 11 June 2022 diff hist +59 m IT Notes →Containers: Added wailord
27 May 2022
- 21:1721:17, 27 May 2022 diff hist +58 IT Notes →Containers
- 03:0303:03, 27 May 2022 diff hist +65 m IT Notes change order and wording
25 May 2022
- 06:1506:15, 25 May 2022 diff hist +291 m IT Notes Added Virtual Machine Cluster
16 May 2022
- 11:0311:03, 16 May 2022 diff hist 0 m IT Notes →IP Assignment on the MAG Laboratory Network
- 11:0211:02, 16 May 2022 diff hist +66 IT Notes →The Internet of Trash and Single-Board Computers
- 10:5610:56, 16 May 2022 diff hist +7 m IT Notes →Containers: changed connor description
- 10:5510:55, 16 May 2022 diff hist +1,760 IT Notes Added a listing of IT services that users may be interested in.
6 May 2022
- 05:3805:38, 6 May 2022 diff hist +55 IT Notes →Containers
2 May 2022
- 14:3714:37, 2 May 2022 diff hist +238 IT Notes →IP Assignment on the MAG Laboratory Network
- 02:1102:11, 2 May 2022 diff hist +134 Tiger II →Tiger's Spay Return
- 02:1002:10, 2 May 2022 diff hist +110 Tiger II No edit summary
3 February 2022
- 11:2411:24, 3 February 2022 diff hist +99 m IT Notes →The Routers
- 11:0211:02, 3 February 2022 diff hist +64 m IT Notes →The Internet of Trash and Single-Board Computers
- 11:0111:01, 3 February 2022 diff hist +260 m IT Notes →IP Assignment on the MAG Laboratory Network
- 10:0110:01, 3 February 2022 diff hist +1,424 N IT Notes Created page with "These are notes that somebody told User:Blu to create. == Accounts on MAG Laboratory == Getting an account on this wiki is meant to be difficult. '''todo:''' ''image here..."
- 05:2405:24, 3 February 2022 diff hist 0 Meeting Minutes No edit summary
- 05:1105:11, 3 February 2022 diff hist 0 Category:Projects No edit summary
18 December 2021
- 13:2613:26, 18 December 2021 diff hist +43 m HAL →2021
- 13:2513:25, 18 December 2021 diff hist +49 m HAL updated the 2021 history
6 September 2021
- 03:2203:22, 6 September 2021 diff hist +573 N Dake MEP Cobra 350 Cold Cut Saw added title block
- 02:5802:58, 6 September 2021 diff hist +4 m Category:Equipment dake saw has a page
- 02:5602:56, 6 September 2021 diff hist 0 m File:DakeMEPCobra350ColdCutSaw.png wrong saw model current
- 02:5602:56, 6 September 2021 diff hist +48 N File:DakeMEPCobra250ColdCutSaw.png Blu moved page File:DakeMEPCobra250ColdCutSaw.png to File:DakeMEPCobra350ColdCutSaw.png: wrong saw model current Tag: New redirect
- 02:5602:56, 6 September 2021 diff hist 0 m File:DakeMEPCobra350ColdCutSaw.png Blu moved page File:DakeMEPCobra250ColdCutSaw.png to File:DakeMEPCobra350ColdCutSaw.png: wrong saw model
- 02:5502:55, 6 September 2021 diff hist 0 m Category:Equipment correcting the dake cold cut saw
5 September 2021
- 00:3500:35, 5 September 2021 diff hist +326 HAL →History
28 June 2021
- 20:2120:21, 28 June 2021 diff hist +73 m Materials No edit summary
- 20:1420:14, 28 June 2021 diff hist +189 N Category:Activities placeholder blurb written
11 June 2021
- 05:0405:04, 11 June 2021 diff hist +7 m 12" Axial Ventilation Fan →Modbus code reference: code edit
- 03:5603:56, 11 June 2021 diff hist 0 m 12" Axial Ventilation Fan →Modbus code reference: changed address
2 June 2021
- 05:5005:50, 2 June 2021 diff hist +293 m 12" Axial Ventilation Fan No edit summary
- 05:4605:46, 2 June 2021 diff hist +22 m 12" Axial Ventilation Fan No edit summary
- 05:4405:44, 2 June 2021 diff hist +2 m 12" Axial Ventilation Fan No edit summary
- 05:2905:29, 2 June 2021 diff hist +800 12" Axial Ventilation Fan added VFD content
- 03:2903:29, 2 June 2021 diff hist −1 m Category:Equipment →Other: Fan Picture placed
28 May 2021
- 01:0101:01, 28 May 2021 diff hist +88 m K40 Laser Cutter air assist nozzle
10 April 2021
- 02:4002:40, 10 April 2021 diff hist +2,164 N Space Tour Notes Created page with "This page is dedicated to providing a short summary of the talking points that a space tour would have == Kitchen == The kitchen is an area at the head of the space where ref..."
30 March 2021
- 01:1001:10, 30 March 2021 diff hist +114 K40 Laser Cutter →History
16 March 2021
- 09:3009:30, 16 March 2021 diff hist +1,447 Tiger II added Tiger stories and updated medical history.
- 09:1709:17, 16 March 2021 diff hist −9 Tiger II No edit summary
24 February 2021
- 07:4607:46, 24 February 2021 diff hist +14 m Category:Equipment updated pictures
- 07:1707:17, 24 February 2021 diff hist −8 m 12" Axial Ventilation Fan added images
- 07:1507:15, 24 February 2021 diff hist +65 m K40 Laser Cutter →Gallery
- 07:1207:12, 24 February 2021 diff hist +47 N File:12"AFF Fan.jpg The fan on the 12" Axial Flow Fan current
- 07:1107:11, 24 February 2021 diff hist +51 N File:12"AFF 1PhMotor.jpg 12" Axial Flow Fan single phase motor current
- 07:1107:11, 24 February 2021 diff hist +43 N File:12"AFF Belt.jpg The 12" Axial Flow Fan's belt current
- 07:0907:09, 24 February 2021 diff hist +305 K40 Laser Cutter →Gallery
- 06:5706:57, 24 February 2021 diff hist +2 m Category:Equipment →Planar Image Handling: Added epson v550 scanner
16 February 2021
- 19:2519:25, 16 February 2021 diff hist +91 N File:K40 AirAssistPump.jpg The air assist pump for the K40 Kodak UltraMax400 Nikon FE Nikon 28-70 f/2.8 current
- 04:3304:33, 16 February 2021 diff hist +57 K40 Laser Cutter No edit summary
- 04:3304:33, 16 February 2021 diff hist +118 N File:K40 CuttingAssembly.jpg The K40 cutting assembly with air assist installed - Kodak UltraMax 400 - Nikon FE - Nikon 28-70 f/2.8 current
- 04:3104:31, 16 February 2021 diff hist +104 m K40 Laser Cutter added images
- 04:2704:27, 16 February 2021 diff hist +104 N File:K40 InteriorAirAssist.jpg K40 interior with air assist Taken with Kodak Ultramax 400 - Nikon FE - Nikon 28-70 f/2.8 current
- 04:2104:21, 16 February 2021 diff hist +119 N File:K40 CuttingNeoprene.jpg The K40 laser cutter cutting neoprene rubber Taken on Kodak UltraMax 400 - Nikon FE - Nikon 28-70 f/2.8 current
- 04:1004:10, 16 February 2021 diff hist +5 Template:3D DigitalFabrication No edit summary
- 04:0804:08, 16 February 2021 diff hist +39 N File:MP.jpg Blu moved page File:MP.jpg to File:MP MakerSelectV2.jpg current Tag: New redirect
- 04:0804:08, 16 February 2021 diff hist 0 m File:MP MakerSelectV2.jpg Blu moved page File:MP.jpg to File:MP MakerSelectV2.jpg current
- 04:0804:08, 16 February 2021 diff hist +102 m File:MP MakerSelectV2.jpg No edit summary
- 04:0604:06, 16 February 2021 diff hist 0 N File:MP MakerSelectV2.jpg No edit summary
- 04:0204:02, 16 February 2021 diff hist +16 m 12" Axial Ventilation Fan added images
- 03:5803:58, 16 February 2021 diff hist +114 N File:AxialVentilationFan.jpg Picture of the Axial Ventilation fan. Taken with Kodak UltraMax 400. - Nikon FE - Nikon 28-70 f/2.8 current
8 February 2021
- 15:4515:45, 8 February 2021 diff hist +119 N File:MartinResting.jpg Picture of Martin the cat. Taken on Kodak Vision3 500T 5219 with the Nikon FE and the Nikon 28-70 f/2.8. current
7 February 2021
- 12:1312:13, 7 February 2021 diff hist +134 N File:K40LaserCutterWithAirAssist.jpg The K40 laser cutter with air assist installed. Taken on Kodak 500T with the Nikon FE using the Nikon 28-70 AF-s f/2.8. current
- 12:1112:11, 7 February 2021 diff hist +110 N File:K40LaserCutterThermometer.jpg The K40 laser cutter thermometer taken on Kodak 250D on the Nikon FE with the Nikon 28-70 f/2.8. current
- 12:0812:08, 7 February 2021 diff hist +124 N File:K40LaserCutterLidOpen.jpg The K40 laser cutter with the lid open taken with Kodak 250D on the Nikon FE with the Nikon AF-s 28-70 f/2.8. current
- 12:0612:06, 7 February 2021 diff hist +109 N File:K40LaserCutterControlBoards.jpg K40 laser cutter control boards taken on Kodak 250D with the Nikon using the Nikon 28-70 f/2.8. current
- 12:0312:03, 7 February 2021 diff hist +97 N File:K40LaserCutterPSU.jpg The K40 PSU taken with Kodak 250D on the Nikon FE using the Nikon AF-s 28-70 f/2.8. current
- 12:0112:01, 7 February 2021 diff hist +84 N File:K40LaserCutterTube.jpg Taken with Kodak 250D on the Nikon FE with the Nikon 28-70 f/2.8 AF-s. current
- 11:5511:55, 7 February 2021 diff hist 0 N File:FilmProcessingEquipment.jpg No edit summary current
- 11:5311:53, 7 February 2021 diff hist +73 m File:FilmEpsonV550.jpg added summary current
- 11:5211:52, 7 February 2021 diff hist 0 N File:FilmEpsonV550.jpg No edit summary
6 February 2021
- 13:5713:57, 6 February 2021 diff hist +5 m File:K40 LaserCutter.jpg No edit summary current
- 13:5613:56, 6 February 2021 diff hist +49 m File:Tiger II.jpg No edit summary current
- 13:5513:55, 6 February 2021 diff hist 0 m File:3DQiDi.jpg No edit summary current
- 10:5810:58, 6 February 2021 diff hist +130 N QiDi X-Plus 3D Printer Created page with "TODO == Other 3D Printers == This is a part of our ongoing effort to document our 3D printers. {{Template:3D_DigitalFabrication}}"
- 10:5510:55, 6 February 2021 diff hist +158 m Zortrax M200 3D Printer No edit summary
- 10:5410:54, 6 February 2021 diff hist +48 m Template:3D DigitalFabrication No edit summary
- 10:2910:29, 6 February 2021 diff hist +47 m Template:3D DigitalFabrication included qidi printer and made link for the X-plus
- 10:2710:27, 6 February 2021 diff hist +20 Template:3D DigitalFabrication Undo revision 1496 by Blu (talk) Tag: Undo
- 10:2710:27, 6 February 2021 diff hist −161 m Category:Equipment →Digital Fabrication
- 10:2710:27, 6 February 2021 diff hist −20 Template:3D DigitalFabrication No edit summary
- 10:2610:26, 6 February 2021 diff hist +320 N Template:3D DigitalFabrication Created page with "<noinclude>This is a template for the 3D Digital Fabrication Gallery with links!</noinclude> <gallery> File:Zortrax1.jpeg|Zortrax M200 3D Printer File:Kossel.jpeg|Kossel..."
- 10:2010:20, 6 February 2021 diff hist +67 N File:3DQiDi.jpg The qidi 3d printer Taken on Kodak 5219 Vision3 500T
- 10:1510:15, 6 February 2021 diff hist +76 N File:TigWelding.jpg Tig Welding by User:Sphynx Taken on Fuji Superia Xtra 400 current
3 February 2021
- 17:5217:52, 3 February 2021 diff hist −5 m Phoebe Blackjaw No edit summary
- 17:5117:51, 3 February 2021 diff hist −6 Phoebe Blackjaw →About Blackjaw, By Brandon
- 17:4817:48, 3 February 2021 diff hist +59 m Phoebe Blackjaw No edit summary
- 17:4817:48, 3 February 2021 diff hist +45 N File:PhoebeBlackjawDeflated.jpg Even Bond villains need a break current
- 17:4517:45, 3 February 2021 diff hist +53 m Phoebe Blackjaw No edit summary
- 17:4517:45, 3 February 2021 diff hist 0 N File:PhoebeBlackjawBackside.jpg No edit summary current
- 17:4317:43, 3 February 2021 diff hist +64 m MAG Cat No edit summary
- 17:4017:40, 3 February 2021 diff hist +83 N File:MartinComputerUse.jpg Martin fell asleep while using the computer to shop for more cat food current
- 17:3617:36, 3 February 2021 diff hist +42 m Category:Cats added twocat image
- 17:3517:35, 3 February 2021 diff hist +121 N File:TwoCatAlgorithm.jpg Have you ever heard of the twofish algorithm? Well, I would like to introduce you to the twocat algorithm. current
- 17:3417:34, 3 February 2021 diff hist +28 N Cats Blu moved page Cats to Category:Cats: should belong in a category instead current Tag: New redirect
- 17:3417:34, 3 February 2021 diff hist 0 m Category:Cats Blu moved page Cats to Category:Cats: should belong in a category instead
- 17:3217:32, 3 February 2021 diff hist +139 m MAG Cat added photos and added to category
- 17:3117:31, 3 February 2021 diff hist +79 N File:MartinTech.jpg Martin is quite familiar with technology... mostly sitting on it. current
- 17:2817:28, 3 February 2021 diff hist +50 N File:MartinCloseup.jpg A closeup shot of Martin Luther Kat. current
- 17:2117:21, 3 February 2021 diff hist +19 m Tiger II added to the cat category
- 17:1517:15, 3 February 2021 diff hist +59 m Phoebe Blackjaw No edit summary
- 17:1117:11, 3 February 2021 diff hist +154 m Phoebe Blackjaw added more photos of blackjaw
- 17:0617:06, 3 February 2021 diff hist +130 N File:PhoebeBlackjawPosing.jpg Phoebe Blackjaw in MAG Laboratory posing for her profile photo on the backdrop of her natural environment: the shop. current
- 17:0517:05, 3 February 2021 diff hist +51 N File:PhoebeBlackjawFangs.jpg Phoebe Blackjaw showing off her fangs current
- 17:0417:04, 3 February 2021 diff hist +114 N File:PhoebeBlackjawCloseup.jpg Phoebe Blackjaw Posing For her Closeup Taken on the Pentax Q10 + Metabones Q666 + Nikon 55mm f/1.2. current
- 16:5816:58, 3 February 2021 diff hist +19 m Phoebe Blackjaw added to cat category
- 16:5716:57, 3 February 2021 diff hist +208 m Phoebe Blackjaw added princess photos
- 16:5416:54, 3 February 2021 diff hist +3 m Category:Cats added blackjaw image
- 16:5316:53, 3 February 2021 diff hist 0 N File:PrincessBlackjawPosing.jpg No edit summary current
- 16:5216:52, 3 February 2021 diff hist 0 N File:PrincessBlackjawWithDirt.jpg No edit summary current
- 16:5216:52, 3 February 2021 diff hist 0 N File:PrincessBlackjawOnCouch.jpg No edit summary current
- 15:3615:36, 3 February 2021 diff hist +23 K40 Laser Cutter No edit summary
- 14:0114:01, 3 February 2021 diff hist +35 K40 Laser Cutter →Air Assist Upgrades
- 14:0114:01, 3 February 2021 diff hist +12 m K40 Laser Cutter →Air Assist Upgrades
- 14:0014:00, 3 February 2021 diff hist +40 m K40 Laser Cutter →Laser Path
- 13:5613:56, 3 February 2021 diff hist 0 N File:K40DragChainBracket.stl No edit summary current
- 13:2913:29, 3 February 2021 diff hist +12 MAG Lab Wings Light No edit summary current
- 13:1313:13, 3 February 2021 diff hist −7 MAG Lab Wings Light No edit summary
- 13:0913:09, 3 February 2021 diff hist −2 MAG Lab Wings Light No edit summary
- 12:4812:48, 3 February 2021 diff hist −4 Phoebe Blackjaw removed false link. We do not plan to have a page for tails.
- 12:4812:48, 3 February 2021 diff hist +1,669 N Phoebe Blackjaw Phoebe Blackjaw
- 12:4512:45, 3 February 2021 diff hist +47 N File:PrincessBlackjaw.jpg Princess Blackjaw likes bicycles. current
- 12:4412:44, 3 February 2021 diff hist +47 N File:PhoebeBlackjawKitten.jpg Kitten related to Phoebe Blackjaw current
- 12:4212:42, 3 February 2021 diff hist +52 N File:PhoebeBlackjawEatingWithKitten.jpg Phoebe Blackjaw eating with her kitten current
- 12:4112:41, 3 February 2021 diff hist +66 N File:PhoebeBlackjawRelaxing.jpg Phoebe Blackjaw relaxing on the MAGLab pleated couch current
- 12:3212:32, 3 February 2021 diff hist +154 N File:PhoebeBlackjaw.jpg Phoebe Blackjaw taken on the Nikon FE with the Nikon 55mm f/1.2 on Kodak Ektar 100 pushed +1. Processed and scanned at World Photo in Brea. current
- 12:0212:02, 3 February 2021 diff hist +251 MAG Lab Wings Light No edit summary
- 12:0112:01, 3 February 2021 diff hist 0 N File:WingsLight.svg No edit summary current
- 11:5911:59, 3 February 2021 diff hist +90 N File:WingsLight.stl MAG Lab gear created with fusion360 with m5 bolt holes. Print two of these. current
- 10:5910:59, 3 February 2021 diff hist +581 N MAG Lab Wings Light Created page with "{| class="wikitable" style="float:right;" |+MAG Lab Wings Light |300px<br/> '''Status:''' Fully Working <br/> |- !Light |- | '''Location:''' Art..."
- 10:5810:58, 3 February 2021 diff hist +134 N File:WingsLightGear.jpg First iteration of the MAG Lab Wings Light Taken on Fuji Superia X-tra 400 with the Nikon FE with the Nikon 55mm f/1.2. current
- 10:5110:51, 3 February 2021 diff hist 0 N File:WingsLightBareLamp.jpg No edit summary current
- 10:4810:48, 3 February 2021 diff hist +6 Category:Projects No edit summary
- 10:4710:47, 3 February 2021 diff hist +57 N File:WingsLightDesign.png The design of the wings light in fusion 360 current
- 10:2710:27, 3 February 2021 diff hist +31 Category:Projects No edit summary
- 10:0510:05, 3 February 2021 diff hist +1 Tiger II No edit summary
- 10:0410:04, 3 February 2021 diff hist +1,152 N Tiger II Tiger II
- 10:0010:00, 3 February 2021 diff hist +249 MAG Cat No edit summary
- 09:5409:54, 3 February 2021 diff hist −3 Category:Cats No edit summary
- 09:5309:53, 3 February 2021 diff hist +107 N File:Tiger II.jpg Image of Tiger taken with Kodak Vision3 250D 4307 on the Nikon FE with the Nikon 28-70 f/2.8.
- 09:5009:50, 3 February 2021 diff hist +4 MAG Cat No edit summary
- 09:5009:50, 3 February 2021 diff hist +21 N Martin Luther Cat Redirected page to MAG Cat current Tag: New redirect
- 09:4909:49, 3 February 2021 diff hist +17 MAG Cat No edit summary
- 09:4709:47, 3 February 2021 diff hist +692 MAG Cat No edit summary
- 09:4009:40, 3 February 2021 diff hist +412 MAG Cat No edit summary
- 09:3709:37, 3 February 2021 diff hist +48 K40 Laser Cutter →Gallery
- 09:3409:34, 3 February 2021 diff hist +114 N File:K40 Interior.jpg The interior of the K40 taken with Fuji Superia X-Tra 400 on the Nikon FE and the Nikon 28-70 f/2.8. current
- 09:2209:22, 3 February 2021 diff hist −4 Category:Cats No edit summary
- 09:2209:22, 3 February 2021 diff hist +259 N Category:Cats Created page with "This page redirects to the various cats that have been at MAG Lab. <gallery> File:Magcatbagcat.jpg|MAG Cat File:Placeholder.jpg|Tiger File:Placeholder.jpg|Phoebe Bla..."
- 08:2908:29, 3 February 2021 diff hist +202 12" Axial Ventilation Fan No edit summary
29 January 2021
- 04:5104:51, 29 January 2021 diff hist +155 12" Axial Ventilation Fan No edit summary
28 January 2021
- 11:1011:10, 28 January 2021 diff hist +261 N Shade Structure Created page with "== Background == The space gets hot during the summer. It is debated about how summer heat radiates into the space. It was theorized that space heat is largely from the ceil..." current
- 11:0811:08, 28 January 2021 diff hist +69 Category:Projects No edit summary
- 11:0411:04, 28 January 2021 diff hist +111 12" Axial Ventilation Fan No edit summary
- 11:0211:02, 28 January 2021 diff hist +1,258 N 12" Axial Ventilation Fan questionable pedigree
- 10:3410:34, 28 January 2021 diff hist +51 Category:Equipment No edit summary
27 January 2021
- 05:2005:20, 27 January 2021 diff hist +132 File:K40 LaserCutter.jpg No edit summary
- 05:1805:18, 27 January 2021 diff hist +210 K40 Laser Cutter →History: Added broken mirror and air assist drag chain
3 January 2021
- 11:2611:26, 3 January 2021 diff hist +48 MAG Cat No edit summary
- 11:2011:20, 3 January 2021 diff hist +1 Events No edit summary
- 11:2011:20, 3 January 2021 diff hist +82 Events No edit summary
- 11:1911:19, 3 January 2021 diff hist +20 Events No edit summary
- 11:1711:17, 3 January 2021 diff hist +59 Category:Projects →Past Projects
- 11:1611:16, 3 January 2021 diff hist +161 InFocus Swivel Stand Undo revision 1076 by Mark r (talk) current Tag: Undo
- 11:1311:13, 3 January 2021 diff hist +2 Vacuum Oven No edit summary current
- 11:1211:12, 3 January 2021 diff hist +93 N Vacuum Oven Created page with "TODO == Settings and Materials == TODO == Manuals == [File:A652-01-880.pdf Vacuum Pump PDF]"
- 11:1011:10, 3 January 2021 diff hist 0 Category:Equipment No edit summary
- 11:0111:01, 3 January 2021 diff hist +106 Kossel Delta 3D Printer No edit summary
- 10:5910:59, 3 January 2021 diff hist +43 N File:Kossel4.jpg Kossel running before selling current
- 10:5810:58, 3 January 2021 diff hist +35 N File:Kossel3.jpg Kossel before selling current
- 10:2910:29, 3 January 2021 diff hist −11 User:BLu Redirected page to User:Blu current Tag: New redirect
- 10:2310:23, 3 January 2021 diff hist +58 User:Blu No edit summary
- 10:2210:22, 3 January 2021 diff hist +25 User:Blu No edit summary
- 10:2010:20, 3 January 2021 diff hist 0 N File:Blu.jpeg No edit summary current
- 10:1710:17, 3 January 2021 diff hist +929 N User:Blu Created page with "Hello, you have stumbled on the wiki homepage of Brandon. == Current Role in MAG Lab == As of the annual meeting in 2020, I continue to serve MAG Laboratory as its CTO. Pl..."
- 09:4509:45, 3 January 2021 diff hist +835 N Film Development Created page with "== Purpose == MAG Laboratory has expanded into the "Artists" in MAG. As part of this effort, MAG Laboratory is developing negative film. == Equipment == TODO <gallery> File:..." current
- 09:0409:04, 3 January 2021 diff hist +34 Category:Projects No edit summary
- 09:0309:03, 3 January 2021 diff hist +34 m Category:Projects →Current Projects: added lazor
- 08:5608:56, 3 January 2021 diff hist +1,205 N K40 Laser Cutter Created page with "{| class="wikitable" style="float:right;" |+Chinesium K40 Laser Cutter |300px<br/> '''Location:''' Electronics Room <br/> '''Ownership:''' Mag Lab..."
- 08:3208:32, 3 January 2021 diff hist +46 Category:Equipment →Digital Fabrication
- 08:3008:30, 3 January 2021 diff hist +72 N File:K40 LaserCutter.jpg A photo of the K40 laser cutter take on Kodak Vision3 250D
17 December 2020
- 22:5522:55, 17 December 2020 diff hist +40 Category:Equipment No edit summary
- 22:2622:26, 17 December 2020 diff hist +40 N File:Dialarc.jpeg The MAGLab big blue welder current
11 November 2020
- 12:5012:50, 11 November 2020 diff hist +6 Category:Equipment No edit summary
- 12:4812:48, 11 November 2020 diff hist 0 m Category:Projects No edit summary
- 12:4712:47, 11 November 2020 diff hist +40 Category:Projects No edit summary
- 12:4412:44, 11 November 2020 diff hist +81 Kossel Delta 3D Printer No edit summary
- 12:4312:43, 11 November 2020 diff hist −12 Kossel Delta 3D Printer No edit summary
17 October 2020
- 10:0810:08, 17 October 2020 diff hist +1 Kossel Delta 3D Printer →Gallery
- 10:0710:07, 17 October 2020 diff hist +5 Kossel Delta 3D Printer No edit summary
- 10:0510:05, 17 October 2020 diff hist +74 Kossel Delta 3D Printer added gallery
6 October 2020
- 00:4700:47, 6 October 2020 diff hist −1 Kossel Delta 3D Printer No edit summary
- 00:4600:46, 6 October 2020 diff hist −134 Kossel Delta 3D Printer No edit summary
- 00:3800:38, 6 October 2020 diff hist +958 Kossel Delta 3D Printer No edit summary
4 October 2020
- 23:4323:43, 4 October 2020 diff hist +119 Category:Equipment No edit summary
- 23:3623:36, 4 October 2020 diff hist +863 Category:Equipment Added arts and Office
26 July 2020
- 09:1309:13, 26 July 2020 diff hist +155 HAL No edit summary
- 08:1408:14, 26 July 2020 diff hist +6 HAL No edit summary
- 08:1308:13, 26 July 2020 diff hist +123 HAL No edit summary
- 08:1108:11, 26 July 2020 diff hist +58 N File:HAL 2020 synoptic view.png A synoptic view of HAL on the MAGLab website current
- 08:0808:08, 26 July 2020 diff hist +65 N File:HAL 2020 hardware upgrade.jpeg HAL has been upgraded to have a new mounting plate. current
- 08:0008:00, 26 July 2020 diff hist −1 Kossel Delta 3D Printer No edit summary
- 07:5707:57, 26 July 2020 diff hist +1,025 HAL No edit summary
20 September 2019
- 20:3920:39, 20 September 2019 diff hist 0 Zortrax M200 3D Printer No edit summary
- 02:4502:45, 20 September 2019 diff hist +12 Zortrax M200 3D Printer No edit summary
- 02:1602:16, 20 September 2019 diff hist −4 Category:Equipment →Powered Hand Tools
- 02:1502:15, 20 September 2019 diff hist +1 Category:Equipment No edit summary
- 02:1402:14, 20 September 2019 diff hist +8 Category:Equipment No edit summary
- 02:0902:09, 20 September 2019 diff hist +6 PACE MBT-100 Desoldering Station No edit summary current
- 02:0502:05, 20 September 2019 diff hist 0 N File:PACE-MBT100-Station.jpeg No edit summary current
- 02:0202:02, 20 September 2019 diff hist +386 PACE MBT-100 Desoldering Station No edit summary
11 September 2019
- 18:2518:25, 11 September 2019 diff hist +36 Meeting Minutes No edit summary
- 18:2418:24, 11 September 2019 diff hist +253 Meeting Minutes No edit summary
5 September 2019
- 17:4217:42, 5 September 2019 diff hist +6 m Kossel Delta 3D Printer No edit summary
- 17:4117:41, 5 September 2019 diff hist +41 Kossel Delta 3D Printer No edit summary
- 17:3917:39, 5 September 2019 diff hist −92 Kossel Delta 3D Printer Removed bed leveling section.
19 May 2019
- 01:5201:52, 19 May 2019 diff hist +63 N File:A652-01-880.pdf Vacuum Pump Documentation for the RV3 vacuum pump current
20 September 2018
- 03:4003:40, 20 September 2018 diff hist +33 N User:BLu Created page with "Current webmaster. Kind of lazy."
- 03:3903:39, 20 September 2018 diff hist +753 BLu Delta 3D Printer No edit summary
19 September 2018
- 04:5804:58, 19 September 2018 diff hist +4 Category:Equipment No edit summary
- 04:5604:56, 19 September 2018 diff hist +62 N HAL Created page with "HAL is MAG Laboratory's motion, door, and open status monitor."
11 September 2018
- 02:2302:23, 11 September 2018 diff hist +70 Category:Projects No edit summary
10 September 2018
- 20:0320:03, 10 September 2018 diff hist +2 BLu Delta 3D Printer No edit summary
- 20:0220:02, 10 September 2018 diff hist −6 BLu Delta 3D Printer No edit summary
- 20:0020:00, 10 September 2018 diff hist 0 BLu Delta 3D Printer No edit summary
- 20:0020:00, 10 September 2018 diff hist +1,076 BLu Delta 3D Printer No edit summary